Download or read book Electromagnetic Modelling of Power Electronic Converters written by J.A. Ferreira and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: The era of the personal computer has, without doubt, permanently altered our life style in a myriad of ways. The "brain" of the personal computer is the microprocessor (together with RAM and ROM) which makes the decisions needed for the computer to perform in the desired manner. The microprocessor continues to evolve as increasingly complex tasks are required. While not sharing the limelight of the microprocessor, the "heart" of the personal computer, namely the power supply, is equally important since without the necessary source of power the microprocessor would be a useless piece of silicon. The power supply of twenty years ago was much different than its modem day equivalent. At the dawn of the personal computer era in the late 1970s, de power was obtained from a simple diode bridge. However, the need for smooth, regulated DC at low voltage required at the same time both a bulky input transformer and a large dc side ftlter. Those computer fans present at the birth of this industry can remember the large boxes housing our Altair, Cromemco and Northstar computers which was made necessary largely because of the huge power supply. It is not well appreciated but certainly true that the huge sucess of the Apple II computer in those days was due, at least in part, to the relatively slim proftle of the machine. This sleek appearance was largely due to the adoption of the then new and unproven switched mode power supply.

Download or read book Electromagnetic Modelling of Power Electronic Converters written by Jan Abraham Ferreira and published by . This book was released on 2014-01-15 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electromagnetic Modelling of Power Electronic Converters under Conditions of Apreciable Skin and Proximity Effects written by Jan Abraham Ferreira and published by . This book was released on 1987 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Electronic Converters written by Narayanaswamy P R Iyer and published by CRC Press. This book was released on 2018-03-09 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a step-by-step method for the development of a virtual interactive power electronics laboratory. The book is suitable for undergraduates and graduates for their laboratory course and projects in power electronics. It is equally suitable for professional engineers in the power electronics industry. The reader will learn to develop interactive virtual power electronics laboratory and perform simulations of their own, as well as any given power electronic converter design using SIMULINK with advanced system model and circuit component level model. Features Examples and Case Studies included throughout. Introductory simulation of power electronic converters is performed using either PSIM or MICROCAP Software. Covers interactive system model developed for three phase Diode Clamped Three Level Inverter, Flying Capacitor Three Level Inverter, Five Level Cascaded H-Bridge Inverter, Multicarrier Sine Phase Shift PWM and Multicarrier Sine Level Shift PWM. System models of power electronic converters are verified for performance using interactive circuit component level models developed using Simscape-Electrical, Power Systems and Specialized Technology block set. Presents software in the loop or Processor in the loop simulation with a power electronic converter examples.

Download or read book Modelling and Simulation of Power Electronic Converter Dominated Power Systems in PowerFactory written by Francisco M. Gonzalez-Longatt and published by Springer Nature. This book was released on 2021 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of power electronic converters for numerical simulations based on DIgSILENT PowerFactory. It covers the working principles, key assumptions and implementation of models of different types of these power systems. The book is divided into three main parts: the first discusses high-voltage direct currents, while the second part examines distribution systems and micro-grids. Lastly, the third addresses the equipment and technologies used in modelling and simulation. Each chapter includes practical examples and exercises, and the accompanying software illustrates essential models, principles and performance using DIgSILENT PowerFactory. Exploring various current topics in the field of modelling power systems, this book will appeal to a variety of readers, ranging from students to practitioners.

Download or read book Power Electronic Converters Modeling and Control written by Seddik Bacha and published by Springer Science & Business Media. This book was released on 2013-11-12 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern power electronic converters are involved in a very broad spectrum of applications: switched-mode power supplies, electrical-machine-motion-control, active power filters, distributed power generation, flexible AC transmission systems, renewable energy conversion systems and vehicular technology, among them. Power Electronics Converters Modeling and Control teaches the reader how to analyze and model the behavior of converters and so to improve their design and control. Dealing with a set of confirmed algorithms specifically developed for use with power converters, this text is in two parts: models and control methods. The first is a detailed exposition of the most usual power converter models: · switched and averaged models; · small/large-signal models; and · time/frequency models. The second focuses on three groups of control methods: · linear control approaches normally associated with power converters; · resonant controllers because of their significance in grid-connected applications; and · nonlinear control methods including feedback linearization, stabilizing, passivity-based, and variable-structure control. Extensive case-study illustration and end-of-chapter exercises reinforce the study material. Power Electronics Converters Modeling and Control addresses the needs of graduate students interested in power electronics, providing a balanced understanding of theoretical ideas coupled with pragmatic tools based on control engineering practice in the field. Academics teaching power electronics will find this an attractive course text and the practical points make the book useful for self tuition by engineers and other practitioners wishing to bring their knowledge up to date.

Download or read book Electromagnetic Modelling of Power Electronic Converters Under Conditions of Appreciable Skin and Proximity Effects written by Jan Abraham Ferreira and published by . This book was released on 1987 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Conducted Electromagnetic Interference in Power Converters Modeling Prediction and Reduction written by Xinbo Ruan and published by Springer Nature. This book was released on 2024-02-13 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book belongs to the subject of electrical engineering. It focuses on the modeling, prediction and reduction of conducted EMI in power converters including the AC-DC rectifiers, DC-DC converters and DC-AC inverters and provides the analytical models and solutions to conducted EMI issues in practical applications. The theoretical analysis, simulation and experimental results are well presented with figures and tables. This book is an essential and valuable reference for the graduate students and academics majoring in power electronics and the engineers being engaged in solving the conducted EMI issues in power converters. Senior undergraduate students majoring in electrical engineering and automation engineering also find this book useful.

Download or read book Emerging Power Converters for Renewable Energy and Electric Vehicles written by Md Rabiul Islam and published by CRC Press. This book was released on 2021-04-22 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers advancements of power electronic converters and their control techniques for grid integration of large-scale renewable energy sources and electrical vehicles. Major emphasis are on transformer-less direct grid integration, bidirectional power transfer, compensation of grid power quality issues, DC system protection and grounding, interaction in mixed AC/DC system, AC and DC system stability, magnetic design for high-frequency high power density systems with advanced soft magnetic materials, modelling and simulation of mixed AC/DC system, switching strategies for enhanced efficiency, and protection and reliability for sustainable grid integration. This book is an invaluable resource for professionals active in the field of renewable energy and power conversion.

Download or read book Voltage Sourced Converters in Power Systems written by Amirnaser Yazdani and published by John Wiley & Sons. This book was released on 2010-03-25 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents Fundamentals of Modeling, Analysis, and Control of Electric Power Converters for Power System Applications Electronic (static) power conversion has gained widespread acceptance in power systems applications; electronic power converters are increasingly employed for power conversion and conditioning, compensation, and active filtering. This book presents the fundamentals for analysis and control of a specific class of high-power electronic converters—the three-phase voltage-sourced converter (VSC). Voltage-Sourced Converters in Power Systems provides a necessary and unprecedented link between the principles of operation and the applications of voltage-sourced converters. The book: Describes various functions that the VSC can perform in electric power systems Covers a wide range of applications of the VSC in electric power systems—including wind power conversion systems Adopts a systematic approach to the modeling and control design problems Illustrates the control design procedures and expected performance based on a comprehensive set of examples and digital computer time-domain simulation studies This comprehensive text presents effective techniques for mathematical modeling and control design, and helps readers understand the procedures and analysis steps. Detailed simulation case studies are included to highlight the salient points and verify the designs. Voltage-Sourced Converters in Power Systems is an ideal reference for senior undergraduate and graduate students in power engineering programs, practicing engineers who deal with grid integration and operation of distributed energy resource units, design engineers, and researchers in the area of electric power generation, transmission, distribution, and utilization.

Download or read book Modeling and Control of Power Electronic Converters for Microgrid Applications written by Yang Han and published by Springer Nature. This book was released on 2021-08-27 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of power electronic converter modeling and control, digital simulation, and experimental studies in the area of renewable energy systems and AC/DC microgrid. Recent advanced control methods for voltage source inverters (VSIs) and the hierarchical controlled islanded microgrid are discussed, including the mathematical modeling, controller synthesis, parameter selection and multi-scale stability analysis, and consensus-based control strategies for the microgrid and microgrid clusters. The book will be an invaluable technical reference for practicing engineers and researchers working in the areas of renewable energy, power electronics, energy internet, and smart grid. It can also be utilized as reference book for undergraduate and postgraduate students in electrical engineering.

Download or read book Electromagnetic Transients of Power Electronics Systems written by Zhengming Zhao and published by Springer. This book was released on 2019-02-20 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses topics related to power electronics, especially electromagnetic transient analysis and control of high-power electronics conversion. It focuses on the re-evaluation of power electronics, transient analysis and modeling, device-based system-safe operating area, and energy balance-based control methods, and presenting, for the first time, numerous experimental results for the transient process of various real-world converters. The book systematically presents both theoretical analysis and practical applications. The first chapter discusses the structure and attributes of power electronics systems, highlighting the analysis and synthesis, while the second chapter explores the transient process and modeling for power electronics systems. The transient features of power devices at switching-on/off, transient conversion circuit with stray parameters and device-based system-safe operating area are described in the subsequent three chapters. The book also examines the measurement of transient processes, electromagnetic pulses and their series, as well as high-performance, closed-loop control, and expounds the basic principles and method of the energy-balanced control strategy. Lastly, it introduces the applications of transient analysis of typical power electronics systems. The book is valuable as a textbook for college students, and as a reference resource for electrical engineers as well as anyone working in the field of high-power electronics system.

Download or read book Modeling and Control of Power Electronics Converter System for Power Quality Improvements written by Sanjeet Kumar Dwivedi and published by Academic Press. This book was released on 2018-08-17 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Control of Power Electronics Converter Systems for Power Quality Improvements provides grounded theory for the modeling, analysis and control of different converter topologies that improve the power quality of mains. Intended for researchers and practitioners working in the field, topics include modeling equations and the state of research to improve power quality converters. By presenting control methods for different converter topologies and aspects related to multi-level inverters and specific analysis related to the AC interface of drives, the book helps users by putting a particular emphasis on different control algorithms that enhance knowledge and research work. Present In-depth coverage of modeling and control methods for different converter topology Includes a particular emphasis on different control algorithms to give readers an easier understanding Provides a results and discussion chapter and MATLAB simulation to support worked examples and real-life application scenarios

Download or read book Control of Power Electronic Converters and Systems Volume 4 written by Frede Blaabjerg and published by Elsevier. This book was released on 2024-03 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters and Systems, Volume Four covers emerging topics in the control of power electronics and converters not covered in previous volumes, including emerging power converter topologies, storage systems, battery chargers and the smart transformer. This updated edition specifically focuses on emerging power converter topologies and discusses very recent advances and topics with applications in power electronics and formidable probable dynamics. Chapters include modeling of power converters and their control, with supportive simulations and additional experimental results. Anyone looking for fundamental knowledge regarding new trends in power electronics by application, and also ready to use models and methodologies in their design, control and testing will find this the next invaluable resource in this highly regarded series. Combines essential control design methods and trends with different applications of power convertor topologies Includes global perspectives, case studies and real examples from different applications and their control Features ready-to-use models and methodologies in power electronic application, their design, control and testing

Download or read book Control of Power Electronic Converters and Systems written by Frede Blaabjerg and published by Elsevier. This book was released on 2021-04-07 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters and Systems, Volume 3, explores emerging topics in the control of power electronics and converters, including the theory behind control, and the practical operation, modeling, and control of basic power system models. This book introduces the most important controller design methods, including both analog and digital procedures. This reference explains the dynamic characterization of terminal behavior for converters, as well as preserving the stability and power quality of modern power systems. Useful for engineers in emerging applications of power electronic converters and those combining control design methods into different applications in power electronics technology. Addressing controller interactions - in light of increasing renewable energy integration and related challenges with stability and power quality - is becoming more frequent in power converters and passive components. Discusses different applications and their control in integrated renewable energy systems Introduces the most important controller design methods, both in analog and digital Describes different important applications to be used in future industrial products Explains the dynamic characterization of terminal behavior for converters

Download or read book Advanced Power Electronics Converters written by Euzeli dos Santos and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers power electronics, in depth, by presenting the basic principles and application details, which can be used both as a textbook and reference book. Introduces a new method to present power electronics converters called Power Blocks Geometry (PBG) Applicable for courses focusing on power electronics, power electronics converters, and advanced power converters Offers a comprehensive set of simulation results to help understand the circuits presented throughout the book

Download or read book Control of Power Electronic Converters and Systems written by Frede Blaabjerg and published by Academic Press. This book was released on 2018-04-27 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters, Volume Two gives the theory behind power electronic converter control and discusses the operation, modelling and control of basic converters. The main components of power electronics systems that produce a desired effect (energy conversion, robot motion, etc.) by controlling system variables (voltages and currents) are thoroughly covered. Both small (mobile phones, computer power supplies) and very large systems (trains, wind turbines, high voltage power lines) and their power ranges, from the Watt to the Gigawatt, are presented and explored. Users will find a focused resource on how to apply innovative control techniques for power converters and drives. - Discusses different applications and their control - Explains the most important controller design methods, both in analog and digital - Describes different, but important, applications that can be used in future industrial products - Covers voltage source converters in significant detail - Demonstrates applications across a much broader context