Download or read book Electrohydraulic Proportional Valves and Closed Loop Control Valves written by Werner Götz and published by . This book was released on 1989 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Closed Loop Electrohydraulic Systems Manual written by Richard J. Long and published by Vickers Incorporated Training Center. This book was released on 1992 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electro hydraulic Proportional Valves written by Joji Parambath and published by . This book was released on 2020-06-18 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the technology used in proportional valves. The book also describes the construction of electro-hydraulic proportional valve systems, the details of various types of control elements, and the characteristics of proportional valve systems. A fluid power professional should possess exceptional knowledge about proportional valves for his/her continuing professional development and career advancement. A faculty or a student in an engineering institution must acquire the knowledge of proportional valves to upgrade his/her knowledge. As the knowledge and skill of the reader improve, professional life is undoubtedly going to be more outstanding and comfortable.The book has been written by a professional trainer who has vast experience in the fluid power area and trained thousands of professionals and students, over 25 years. If you are looking for a more in-depth knowledge into fluid power, then this book is a valuable resource that will assist you in your quest for professional development.
Download or read book Design and Validation of an Electro hydraulic Pressure control Valve and Closed loop Controller written by Jerry Boza and published by . This book was released on 2016 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electro-hydraulic pressure-control valves are used in many applications, such as manufacturing equipment, agricultural machinery, and aircrafts to name a few. They are often used to actuate hydraulic clutches, such as those found in power shift transmissions. A traditional pressure-control valve with open-loop control algorithm is typically used in clutch applications. This scheme often results in inconsistent or undesirable system behavior due to the nature of open-loop control as well as the nonlinear system dynamics and uncertainties. In this research two new electro-hydraulic pressure-control valves were designed in order to decouple the valve and control port (hydraulic) dynamics. This was achieved by removing the regulated pressure balancing force utilized in traditional pressure-control valves. Different closed-loop controllers were designed and tested in parallel in order to achieve the desired steady-state and dynamic regulated pressure response. A nonlinear dynamic model was developed for each valve then used to compare the performance characteristics of the valves. Linear analysis was performed and various control techniques were studied from classical PID control to modern optimal control. The model was also used to predict performance of the closed-loop controllers prior to experimental testing and to validate experimentally tuned controllers afterwards. Prototype valves were fabricated in order to validate the model and to test the controller designs experimentally. Different valve and controller combinations were compared to a traditional pressure-control valve utilizing open-loop control through typical industry performance tests. This study found that a valve with a traditional pressure-control pilot and a main stage spool with no pressure balancing force, along with a gain scheduled PID controller, outperformed the traditional valve in all areas tested. This approach is also feasible within the existing infrastructure of most applications where the benchmark traditional valve is currently used.
Download or read book Electrohydraulic Proportional and Control Systems written by Werner Götz and published by . This book was released on 1999 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, the hydraulic or fluid power systems on a car, such as brakes and power steering, are strictly using fluid power. In the future, these systems may become totally electric, without any hydraulic or fluid power. Until then, the industry is using a combination of electronics and hydraulics, thus the name electrohydraulic. Through decades of research and experience, BOSCH has developed comprehensive knowledge in the field of electrohydraulics. Electrohydraulic Proportional and Control Systems conveys the state-of-the-art in electrohydraulics by presenting modern proportional control valves and servo solenoid valves, as well as open-loop and closed-loop control concepts. The operating principles of hydraulic and electronic components are described clearly and systematically in this book.Contents include: Proportional Control Valves Servo Solenoid Valves Servovalves Servo Cylinders Measurement Systems Proportional Technology Applications in Industrial Hydraulics Control Technology Applications in Industrial Hydraulics Proportional Control Valve Applications in Mobile Hydraulics Servo Solenoid Valve Applications in Mobile Hydraulics Field Bus Connection of Hydraulic Components Commissioning and Maintenance. Also includes various color pictures and charts. Published by Robert Bosch GmbH. Distributed by SAE.
Download or read book Proportional and Servo Valve Technology written by and published by . This book was released on 2003 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electro Hydraulic Components and Systems written by Medhat M K Dr Khalil and published by . This book was released on 2017-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second in its series. The book focuses on the electrohydraulic valves in building open-loop and closed-loop control systems. The book also covers the control electronics that drive the EH valves.
Download or read book On Electrohydraulic Pressure Control for Power Steering Applications written by Alessandro Dell'Amico and published by Linköping University Electronic Press. This book was released on 2016-02-04 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with the Electrohydraulic Power Steering system for road vehicles, using electronic pressure control valves. With an ever increasing demand for safer vehicles and fewer traffic accidents, steering-related active safety functions are becoming more common in modern vehicles. Future road vehicles will also evolve towards autonomous vehicles, with several safety, environmental and financial benefits. A key component in realising such solutions is active steering. The power steering system was initially developed to ease the driver's workload by assisting in turning the wheels. This is traditionally done through a passive open-centre hydraulic system and heavy trucks must still rely on fluid power, due to the heavy work forces. Since the purpose of the original system is to control the assistive pressure, one way would be to use proportional pressure control valves. Since these are electronically controlled, active steering is possible and with closed-centre, energy efficiency can be significantly improved on. In this work, such a system is analysed in detail with the purpose of investigating the possible use of the system for Boost curve control and position control for autonomous driving. Commercially available valves are investigated since they provide an attractive solution. A model-based approach is adopted, where simulation of the system is an important tool. Another important tool is hardware-in-the-loop simulation. A test rig of an electrohydraulic power steering system, is developed. This work has shown how proportional pressure control valves can be used for Boost curve control and position control and what implications this has on a system level. As it turns out, the valves add a great deal of time lag and with the high gain from the Boost curve, this creates a control challenge. The problem can be handled by tuning the Boost gain, pressure response and damping and has been effectively shown through simulation and experiments. For position control, there is greater freedom to design the controller to fit the system. The pressure response can be made fast enough for this case and the time lag is much less critical.
Download or read book Electro Hydraulic Actuation Systems written by J. Jaidev Vyas and published by Springer. This book was released on 2018-09-01 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book serves as a unique integrated platform, which not only describes the design methodology of electro-hydraulic actuation systems but also provides insights into the design of the servo valve, which is the most important component in the system. It presents a step-by-step design process, comparative tables, illustrative figures, and detailed explanations. The book focuses on the design and testing of electro-hydraulic actuation systems, which are increasingly being used in motion control applications, particularly in those where precision actuation at high operational rates is of prime importance. It describes in detail the design philosophy of such high-performance systems, presenting a system used as a physical test setup together with experimental results to corroborate the calculations. Of particular interest are the electro-hydraulic servo valves that form the heart of these actuations. These valves are complex and not much data is available in open literature due to OEM propriety issues. In this context, the book discusses the elaborate mathematical models that have been derived and an approach to validate the mathematical models with test results. Presenting the complex methodology in simple language, it will prove to be a valuable resource for students, researchers, and professional engineers alike.
Download or read book Controlling Electrohydraulic Systems written by Wayne Anderson and published by CRC Press. This book was released on 2020-11-25 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the pump's role in electrohydraulic systems and its use as a power source to a control loop, and provides a good understanding of the basics, complemented by working knowledge of the "real world." It is intended for engineers and students who have studied feedback control theory.
Download or read book Hydraulic and Electro Hydraulic Control Systems written by R.B. Walters and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Force and motion control systems of varying degrees of sophistication have shaped the lives of all individuals living in industrialized countries all over the world, and together with communication technology are largely responsible for the high standard ofliving prevalent in many communities. The brains of the vast majority of current control systems are electronic, in the shape of computers, microprocessors or programmable logic controllers (PLC), the nerves are provided by sensors, mainly electromech anical transducers, and the muscle comprises the drive system, in most cases either electric, pneumatic or hydraulic. The factors governing the choice of the most suitable drive are the nature of the application, the performance specification, size, weight, environ mental and safety constraints, with higher power levels favouring hydraulic drives. Past experience, especially in the machine tool sector, has clearly shown that, in the face of competition from electric drives, it is difficult to make a convincing case for hydraulic drives at the bottom end of the power at fractional horsepower level. A further, and frequently range, specifically overriding factor in the choice of drive is the familiarity of the system designer with a particular discipline, which can inhibit the selection of the optimum and most cost-effective solution for a given application. One of the objectives of this book is to help the electrical engineer overcome his natural reluctance to apply any other than electric drives.
Download or read book Hydraulic Servomechanisms and Their Applications written by John Reginald Fawcett and published by . This book was released on 1970 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Valves and Controls written by John J. Pippenger and published by . This book was released on 1984 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrohydraulic Servo Systems written by D. R. Raghavendra and published by Springer Nature. This book was released on 2023-05-05 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental concepts of electrohydraulic (EH) servo systems in detail and also presents the developments about power, quadratic response, and control flexibility of EH servo systems with applications in aircraft/aerospace engineering, mobile equipment, material/structure testing, motion simulators, and strategic defense sectors. Various topics covered in this books are systems and configurations of servo systems, components, applications, design of SISO and MIMO and control options of SISO and MIMO systems. It further includes a chapter on contamination control, fault detection and diagnosis (FDD) of these systems. The detailed working procedures and advice on implementation routines presented in this book will help readers to apply the control models and systems presented so as to make their own servo systems more efficient. The book will be useful for mechanical engineers and professionals involved in the analysis and design of electrohydraulic control systems, especially in advanced hydraulic industries, the aeronautical and space, and automotive industries. It would also be a useful reference for advanced courses in EH systems.
Download or read book Proportional and Servo Valve Technology written by and published by . This book was released on 1989 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrohydraulic Proportional and Control Systems written by Werner Götz and published by . This book was released on 1999 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Controlling Electrohydraulic Systems written by Wayne Anderson and published by CRC Press. This book was released on 2020-11-26 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the pump's role in electrohydraulic systems and its use as a power source to a control loop, and provides a good understanding of the basics, complemented by working knowledge of the "real world." It is intended for engineers and students who have studied feedback control theory.
