Download or read book Electrochemical Processes in Fuel Cells written by Manfred W. Breiter and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The necessity for a better understanding of the basic processes that determine the operation of fuel cells became evident during the devel opment of practical units in the last three decades. The search for efficient electrocatalysts in low-temperature fuel cells intensified the general study of the nature and the role of the electrode material. Re search on the complex mechanisms of the anodic oxidation of different fuels and of the reduction of molecular oxygen on solid electrodes was stimulated, and the strong influence of adsorbed species on the electrode reaction in question was investigated. Suitable electrolytes had to be found for the high-temperature fuel cells. The use of electrodes with large internal surface lead to the development of models of porous electrode. structures and to the mathematical analysis of the operation of these models under certain conditions. While the chapters I to III introduce the reader to the general field offuel cells, the progress made in the understanding of the basic problems in the electrochemistry of fuel cells since the end of the second world war is reviewed in chapters IV to XVI of this monograph. In contrast, the technological aspects necessary for the development of practical units are not covered here. The open literature published as books or as papers in scientific journals has been considered up to the time of the writing of the final draft of the specific chapter, at least till the end of 1967.
Download or read book Fuel Cells and Hydrogen written by Viktor Hacker and published by Elsevier. This book was released on 2018-07-20 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells and Hydrogen: From Fundamentals to Applied Research provides an overview of the basic principles of fuel cell and hydrogen technology, which subsequently allows the reader to delve more deeply into applied research. In addition to covering the basic principles of fuel cells and hydrogen technologies, the book examines the principles and methods to develop and test fuel cells, the evaluation of the performance and lifetime of fuel cells and the concepts of hydrogen production. Fuel Cells and Hydrogen: From Fundamentals to Applied Research acts as an invaluable reference book for fuel cell developers and students, researchers in industry entering the area of fuel cells and lecturers teaching fuel cells and hydrogen technology. - Includes laboratory methods for fuel cell characterization and manufacture - Outlines approaches in modelling components, cells and stacks - Covers practical and theoretical methods for hydrogen production and storage
Download or read book Fuel Cells written by Wolf Vielstich and published by John Wiley & Sons. This book was released on 1970 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Cell Science and Engineering 2 Volume Set written by Detlef Stolten and published by John Wiley & Sons. This book was released on 2012-05-21 with total page 1298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are expected to play a major role in the future power supply that will transform to renewable, decentralized and fluctuating primary energies. At the same time the share of electric power will continually increase at the expense of thermal and mechanical energy not just in transportation, but also in households. Hydrogen as a perfect fuel for fuel cells and an outstanding and efficient means of bulk storage for renewable energy will spearhead this development together with fuel cells. Moreover, small fuel cells hold great potential for portable devices such as gadgets and medical applications such as pacemakers. This handbook will explore specific fuel cells within and beyond the mainstream development and focuses on materials and production processes for both SOFC and lowtemperature fuel cells, analytics and diagnostics for fuel cells, modeling and simulation as well as balance of plant design and components. As fuel cells are getting increasingly sophisticated and industrially developed the issues of quality assurance and methodology of development are included in this handbook. The contributions to this book come from an international panel of experts from academia, industry, institutions and government. This handbook is oriented toward people looking for detailed information on specific fuel cell types, their materials, production processes, modeling and analytics. Overview information on the contrary on mainstream fuel cells and applications are provided in the book 'Hydrogen and Fuel Cells', published in 2010.
Download or read book Fuel Cells Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. - Chapters written by experts in each area - Extensive bibliography supporting each chapter - Detailed index - Up-to-date diagrams and full colour illustrations
Download or read book Fuel Cells written by Supramaniam Srinivasan and published by Springer Science & Business Media. This book was released on 2006-05-05 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise sourcebook of the electrochemical, engineering and economic principles involved in the development and commercialization of fuel cells offers a thorough review of applications and techno-economic assessment of fuel cell technologies, plus in-depth discussion of conventional and novel approaches for generating energy. Parts I and II explain basic and applied electrochemistry relevant to an understanding of fuel cells. Part III covers engineering and technology aspects. The book is useful for undergraduate and graduate students and scientists interested in fuel cells. Unlike any other current book on fuel cells, each chapter includes problems based on the discussions in the text.
Download or read book PEM Fuel Cell Modeling and Simulation Using Matlab written by Colleen Spiegel and published by Elsevier. This book was released on 2011-08-29 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although, the basic concept of a fuel cell is quite simple, creating new designs and optimizing their performance takes serious work and a mastery of several technical areas. PEM Fuel Cell Modeling and Simulation Using Matlab, provides design engineers and researchers with a valuable tool for understanding and overcoming barriers to designing and building the next generation of PEM Fuel Cells. With this book, engineers can test components and verify designs in the development phase, saving both time and money. Easy to read and understand, this book provides design and modelling tips for fuel cell components such as: modelling proton exchange structure, catalyst layers, gas diffusion, fuel distribution structures, fuel cell stacks and fuel cell plant. This book includes design advice and MATLAB and FEMLAB codes for Fuel Cell types such as: polymer electrolyte, direct methanol and solid oxide fuel cells. This book also includes types for one, two and three dimensional modeling and two-phase flow phenomena and microfluidics. *Modeling and design validation techniques *Covers most types of Fuel Cell including SOFC *MATLAB and FEMLAB modelling codes *Translates basic phenomena into mathematical equations
Download or read book Polymer Electrolyte Fuel Cell Durability written by Felix N. Büchi and published by Springer Science & Business Media. This book was released on 2009-02-08 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a significant number of R&D projects, performed mostly after 2000, devoted to the understanding and prevention of performance degradation processes in polymer electrolyte fuel cells (PEFCs). The extent and severity of performance degradation processes in PEFCs were recognized rather gradually. Indeed, the recognition overlapped with a significant number of industrial dem- strations of fuel cell powered vehicles, which would suggest a degree of technology maturity beyond the resaolution of fundamental failure mechanisms. An intriguing question, therefore, is why has there been this apparent delay in addressing fun- mental performance stability requirements. The apparent answer is that testing of the power system under fully realistic operation conditions was one prerequisite for revealing the nature and extent of some key modes of PEFC stack failure. Such modes of failure were not exposed to a similar degree, or not at all, in earlier tests of PEFC stacks which were not performed under fully relevant conditions, parti- larly such tests which did not include multiple on–off and/or high power–low power cycles typical for transportation and mobile power applications of PEFCs. Long-term testing of PEFCs reported in the early 1990s by both Los Alamos National Laboratory and Ballard Power was performed under conditions of c- stant cell voltage, typically near the maximum power point of the PEFC.
Download or read book Electrochemical Cell Calculations with OpenFOAM written by Steven Beale and published by Springer Nature. This book was released on 2022-05-06 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book is at the nexus of modern software programming practices and electrochemical process engineering. It is the authoritative text on developing open source software for many applications, including: • fuel cells; • electrolyzers; and • batteries. Written by experts in the field in the open source computational fluid dynamics (CFD) code suite OpenFOAM, this book is intended for process engineering professionals developing practical electrochemical designs for industry, as well as researchers focused on finding tomorrow’s answers today. The book covers everything from micro-scale to cell-scale to stack-scale models, with numerous illustrations and programming examples. Starting from a clear explanation of electrochemical processes and simple illustrative examples, the book progresses in complexity through a range of diverse applications. After reading this book, the reader is able to take command and control of model development as an expert. The book is aimed at all engineers and scientists with basic knowledge of calculus and programming in C++.
Download or read book Hydrogen Batteries and Fuel Cells written by Bengt Sundén and published by Academic Press. This book was released on 2019-07-02 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen, Batteries and Fuel Cells provides the science necessary to understand these important areas, considering theory and practice, practical problem-solving, descriptions of bottlenecks, and future energy system applications. The title covers hydrogen as an energy carrier, including its production and storage; the application and analysis of electrochemical devices, such as batteries, fuel cells and electrolyzers; and the modeling and thermal management of momentum, heat, mass and charge transport phenomena. This book offers fundamental and integrated coverage on these topics that is critical to the development of future energy systems. - Combines coverage of hydrogen, batteries and fuel cells in the context of future energy systems - Provides the fundamental science needed to understand future energy systems in theory and practice - Gives examples of problems and solutions in the use of hydrogen, batteries and fuel cells - Considers basic issues in understanding hydrogen and electrochemical devices - Describes methods for modeling and thermal management in future energy systems
Download or read book Proton Exchange Membrane Fuel Cells 6 written by Thomas Francis Fuller and published by The Electrochemical Society. This book was released on 2006 with total page 1385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium was devoted to all aspects of research development and engineering of proton exchange membrane fuel cells. Three subareas were covered: materials and electrode processes, fuel cell systems, and durability.
Download or read book Electrochemical Engineering written by Thomas F. Fuller and published by John Wiley & Sons. This book was released on 2018-03-20 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Reference for Electrochemical Engineering Theory and Application From chemical and electronics manufacturing, to hybrid vehicles, energy storage, and beyond, electrochemical engineering touches many industries—any many lives—every day. As energy conservation becomes of central importance, so too does the science that helps us reduce consumption, reduce waste, and lessen our impact on the planet. Electrochemical Engineering provides a reference for scientists and engineers working with electrochemical processes, and a rigorous, thorough text for graduate students and upper-division undergraduates. Merging theoretical concepts with widespread application, this book is designed to provide critical knowledge in a real-world context. Beginning with the fundamental principles underpinning the field, the discussion moves into industrial and manufacturing processes that blend central ideas to provide an advanced understanding while explaining observable results. Fully-worked illustrations simplify complex processes, and end-of chapter questions help reinforce essential knowledge. With in-depth coverage of both the practical and theoretical, this book is both a thorough introduction to and a useful reference for the field. Rigorous in depth, yet grounded in relevance, Electrochemical Engineering: Introduces basic principles from the standpoint of practical application Explores the kinetics of electrochemical reactions with discussion on thermodynamics, reaction fundamentals, and transport Covers battery and fuel cell characteristics, mechanisms, and system design Delves into the design and mechanics of hybrid and electric vehicles, including regenerative braking, start-stop hybrids, and fuel cell systems Examines electrodeposition, redox-flow batteries, electrolysis, regenerative fuel cells, semiconductors, and other applications of electrochemical engineering principles Overlapping chemical engineering, chemistry, material science, mechanical engineering, and electrical engineering, electrochemical engineering covers a diverse array of phenomena explained by some of the important scientific discoveries of our time. Electrochemical Engineering provides the critical understanding required to work effectively with these processes as they become increasingly central to global sustainability.
Download or read book PEM Fuel Cell Electrocatalysts and Catalyst Layers written by Jiujun Zhang and published by Springer Science & Business Media. This book was released on 2008-08-26 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proton exchange membrane (PEM) fuel cells are promising clean energy converting devices with high efficiency and low to zero emissions. Such power sources can be used in transportation, stationary, portable and micro power applications. The key components of these fuel cells are catalysts and catalyst layers. “PEM Fuel Cell Electrocatalysts and Catalyst Layers” provides a comprehensive, in-depth survey of the field, presented by internationally renowned fuel cell scientists. The opening chapters introduce the fundamentals of electrochemical theory and fuel cell catalysis. Later chapters investigate the synthesis, characterization, and activity validation of PEM fuel cell catalysts. Further chapters describe in detail the integration of the electrocatalyst/catalyst layers into the fuel cell, and their performance validation. Researchers and engineers in the fuel cell industry will find this book a valuable resource, as will students of electrochemical engineering and catalyst synthesis.
Download or read book Sustainable and Green Electrochemical Science and Technology written by Keith Scott and published by John Wiley & Sons. This book was released on 2017-05-16 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable and Green Electrochemical Science and Technology brings together the basic concepts of electrochemical science and engineering and shows how these are applied in an industrial context, emphasising the major role that electrochemistry plays within society and industry in providing cleaner, greener and more sustainable technologies. Electrochemistry has many applications for sustainability; it can be used to store energy, synthesise materials and chemicals, to generate power and to recycle valuable resources. Coverage includes Electrochemistry, Electrocatalysis and Thermodynamics Electrochemical Cells, Materials and Reactors Carbon Dioxide Reduction and Electro-Organic Synthesis Hydrogen production and Water Electrolysis Inorganic Synthesis Electrochemical Energy Storage and Power Sources Electrochemical processes for recycling and resource recovery Fuel Cell Technologies This book is targeted at both industrial and academic readers, providing a good technological reference base for electrochemistry. It will enable the reader to build on basic principles of electrochemistry, and takes these through to cell design for various and diverse applications.
Download or read book Mini Micro Fuel Cells written by S. Kakaç and published by Springer Science & Business Media. This book was released on 2008-04-10 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains an archival record of the NATO Advanced Institute on Mini – Micro Fuel Cells – Fundamental and Applications held in Çesme – Izmir, Turkey, July 22–August 3, 2007. The ASIs are intended to be a high-level teaching activity in scientific and technical areas of current concern. In this volume, the reader may find interesting chapters on Mini- Micro Fuel Cells with fundamentals and applications. In recent years, fu- cell development, modeling and performance analysis has received much attention due to their potential for distributed power which is a critical issue for energy security and the environmental protection. Small fuel cells for portable applications are important for the security. The portable devices (many electronic and wireless) operated by fuel cells for providing all-day power, are very valuable for the security, for defense and in the war against terrorism. Many companies in NATO and non-NATO countries have concentrated to promote the fuel cell industry. Many universities with industrial partners committed to the idea of working together to develop fuel cells. As tech- logy advanced in the 1980s and beyond, many government organizations joined in spending money on fuel-cell research. In recent years, interest in using fuel cells to power portable electronic devices and other small equipment (cell phones, mobile phones, lab-tops, they are used as micro power source in biological applications) has increased partly due to the promise of fuel cells having higher energy density.
Download or read book Hydrogen and Fuel Cells written by Bent Sørensen and published by Academic Press. This book was released on 2011-11-14 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hydrogen economy, in which this one gas provides the source of all energy needs, is often touted as the long-term solution to the environmental and security problems associated with fossil fuels. However, before hydrogen can be used as fuel on a global scale we must establish cost effective means of producing, storing, and distributing the gas, develop cost efficient technologies for converting hydrogen to electricity (e.g. fuel cells), and creating the infrastructure to support all this. Sorensen is the only text available that provides up to date coverage of all these issues at a level appropriate for the technical reader. The book not only describes the "how" and "where" aspects of hydrogen fuels cells usage, but also the obstacles and benefits of its use, as well as the social implications (both economically and environmental). Written by a world-renowned researcher in energy systems, this thoroughly illustrated and cross-referenced book is an excellent reference for researchers, professionals and students in the field of renewable energy. Updated sections on PEM fuel cells, Molten carbonate cells, Solid Oxide cells and Biofuel cells Updated material to reflect the growing commercial acceptance of stationary and portable fuel cell systems, while also recognizing the ongoing research in automotive fuel cell systems A new example of a regional system based on renewable energy sources reflects the growing international attention to uses of renewable energy as part of the energy grid Examples of life cycle analysis of environmental and social impacts
Download or read book Materials for Fuel Cells written by M Gasik and published by Elsevier. This book was released on 2008-10-27 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fuel cell is an electrochemical device that converts the chemical energy of a reaction (between fuel and oxidant) directly into electricity. Given their efficiency and low emissions, fuel cells provide an important alternative to power produced from fossil fuels. A major challenge in their use is the need for better materials to make fuel cells cost-effective and more durable. This important book reviews developments in materials to fulfil the potential of fuel cells as a major power source. After introductory chapters on the key issues in fuel cell materials research, the book reviews the major types of fuel cell. These include alkaline fuel cells, polymer electrolyte fuel cells, direct methanol fuel cells, phosphoric acid fuel cells, molten carbonate fuel cells, solid oxide fuel cells and regenerative fuel cells. The book concludes with reviews of novel fuel cell materials, ways of analysing performance and issues affecting recyclability and life cycle assessment. With its distinguished editor and international team of contributors, Materials for fuel cells is a valuable reference for all those researching, manufacturing and using fuel cells in such areas as automotive engineering. Examines the key issues in fuel cell materials research Reviews the major types of fuel cells such as direct methanol and regenerative fuel cells Further chapters explore ways of analysing performance and issues affecting recyclability and life cycle assessment
