Download or read book Electrochemical Oxidation and Corrosion of Metals written by Elena Pavlovna Grishina and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the detailed study on the electrochemical oxidation and corrosion of metals (silver, copper and their alloys) in concentrated aqueous electrolytes solutions. The influence of electronegative (copper) and electropositive (palladium) constituents on the rate and mechanism of the silver as a constituent of a binary alloy during electro-oxidation in non-steady-state condition is revealed. Mechanisms of electrode processes which include electrochemical reactions of the phase films formation and both chemical and electrochemical stages of their transformation are offered.
Download or read book High Temperature Oxidation and Corrosion of Metals written by David John Young and published by Elsevier. This book was released on 2008-10-03 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with understanding the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry and alloy composition. The focus is on designing (or selecting) alloy compositions which provide optimal resistance to attack by corrosive gases. . Emphasises quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities and alloy compositions. . Uses phase diagrams and diffusion paths to analyse and interpret scale structures and internal precipitation distributions . Provides a detailed examination of corrosion in industrial gases (water vapour effects, carburisation and metal dusting, sulphidation) . Text is well supported by numerous micrographs, phase diagrams and tabulations of relevant thermodynamic and kinetic data . Combines physical chemistry and materials science methodologies.
Download or read book Fundamentals of Electrochemical Corrosion written by Ele Eugene Stansbury and published by ASM International. This book was released on 2000-01-01 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the essential aspects of the corrosion behavior of metals in aqueous environments, this book is designed with the flexibility needed for use in courses for upper-level undergraduate and graduate students, for concentrated courses in industry, for individual study, and as a reference book.
Download or read book Lectures on Electrochemical Corrosion written by Marcel Pourbaix and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Workers in the field of corrosion and their students are most fortunate that a happy set of circumstances brought Dr. Marcel Pourbaix into their field in 1949. First, he was invited, while in the USA, to demonstrate at a two week visit to the National Bureau of Standards the usefulness of his electro chemical concepts to the study of corrosion. Secondly, also around the same time, Prof. H. H. Uhlig made a speech before the United Nations which pointed out the tremendous economic consequences of corrosion. Because of these circumstances, Dr. Pourbaix has reminisced, he chose to devote most of his efforts to corrosion rather than to electrolysis, batteries, geology, or any of the other fields where, one might add, they were equally valuable. This decision resulted in his establishing CEBELCOR (Centre BeIge d'Etude de la Corrosion) and in his development of a course at the Free University of Brussels entitled "Lectures on Electrochemical Corrosion." This book is the collection of these lectures translated into English.
Download or read book Micropollutants and Challenges written by Afsane Chavoshani and published by Elsevier. This book was released on 2020-06-12 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micropollutants and Challenges: Emerging in the Aquatic Environments and Treatment Processes systematically summarizes the characteristics, micropollutants types, production resources, occurrence in aqueous environments, health effects, methods of detection and treatments. Throughout each chapter, the following topics will be presented: (i) The quality and quantity evaluation of aquatic micro-pollutants, (ii) The need for innovative and affordable wastewater treatment technologies, and (iii) Combinations of different conventional and advanced technologies, including the biological and plant-based strategies that seem most promising. Presents information on the micropollutants that threaten all living organisms, showing the importance and relevance of this topic Assesses the effects of micropollutants on surface and groundwater Provides solutions for the removal of micropollutants in conventional and advanced treatment processes and compares the efficiency of different processes
Download or read book High Temperature Oxidation and Corrosion of Metals written by David John Young and published by Elsevier. This book was released on 2016-05-12 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Oxidation and Corrosion of Metals, Second Edition, provides a high level understanding of the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry, and alloy composition. The book focuses on the design and selection of alloy compositions which provide optimal resistance to attack by corrosive gases, providing a rigorous treatment of the thermodynamics and kinetics underlying high temperature alloy corrosion. In addition, it emphasizes quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities, and alloy compositions. Users will find this book to be an indispensable source of information for researchers and students who are dealing with high temperature corrosion. Emphasizes quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities, and alloy compositions Uses phase diagrams and diffusion paths to analyze and interpret scale structures and internal precipitation distributions Presents a detailed examination of corrosion in industrial gases (water vapor effects, carburization and metal dusting, sulphidation) Contains numerous micrographs, phase diagrams, and tabulations of relevant thermodynamic and kinetic data Combines physical chemistry and materials science methodologies Provides two completely new chapters (chapters 11 and 13), and numerous other updates throughout the text
Download or read book Corrosion and Surface Chemistry of Metals written by Dieter Landolt and published by EPFL Press. This book was released on 2007-05-02 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook; grad.
Download or read book Corrosion and Surface Chemistry of Metals written by Dieter Landolt and published by CRC Press. This book was released on 2007-05-02 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a carefully developed and comprehensive overview of the corrosion chemistry of metallic materials, this book covers the principal methods of corrosion prevention. It includes a systematic study of the physical chemistry of the surface supported by state-of-the-art analysis methods. The author builds a scientific foundation by developing t
Download or read book Electrochemistry and Corrosion Science written by Nestor Perez and published by Springer. This book was released on 2016-09-13 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this textbook includes refined text in each chapter, new sections on corrosion of steel-reinforced concrete and on cathodic protection of steel reinforced bars embedded in concrete, and some new solved examples. The book introduces mathematical and engineering approximation schemes for describing the thermodynamics and kinetics of electrochemical systems, which are the essence of corrosion science, in addition to electrochemical corrosion, forms of corrosion and mechanisms of corrosion. This approach should capture the reader’s attention on the complexity of corrosion. Thus, the principles of electrochemistry and electrochemical cells are subsequently characterized in simple electrolytes from a thermodynamics point of view.
Download or read book Introduction to Corrosion Science written by E. McCafferty and published by Springer Science & Business Media. This book was released on 2010-01-04 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for a one-semester course in corrosion science at the graduate or advanced undergraduate level. The approach is that of a physical chemist or materials scientist, and the text is geared toward students of chemistry, materials science, and engineering. This textbook should also be useful to practicing corrosion engineers or materials engineers who wish to enhance their understanding of the fundamental principles of corrosion science. It is assumed that the student or reader does not have a background in electrochemistry. However, the student or reader should have taken at least an undergraduate course in materials science or physical chemistry. More material is presented in the textbook than can be covered in a one-semester course, so the book is intended for both the classroom and as a source book for further use. This book grew out of classroom lectures which the author presented between 1982 and the present while a professorial lecturer at George Washington University, Washington, DC, where he organized and taught a graduate course on “Environmental Effects on Materials.” Additional material has been provided by over 30 years of experience in corrosion research, largely at the Naval Research Laboratory, Washington, DC and also at the Bethlehem Steel Company, Bethlehem, PA and as a Robert A. Welch Postdoctoral Fellow at the University of Texas. The text emphasizes basic principles of corrosion science which underpin extensions to practice.
Download or read book Electrochemical Materials Science written by John Bockris and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is now time for a comprehensive treatise to look at the whole field of electrochemistry. The present treatise was conceived in 1974, and the earliest invitations to authors for contributions were made in 1975. The completion of the early been delayed by various factors. volumes has There has been no attempt to make each article emphasize the most recent situation at the expense of an overall statement of the modern view. This treatise is not a collection of articles from Recent Advances in Electrochemistry or Modern Aspects of Electrochemistry. It is an attempt at making a mature statement about the present position in the vast area of what is best looked at as a new interdisciplinary field. Texas A & M University J. O'M. Bockris University of Ottawa B. E. Conway Case Western Reserve University Ernest Yeager Texas A & M University Ralph E. White Preface to Volume 4 The science of degradation of materials involves a vast area of science and technology, the economic importance of which rivals that of any other clearly defined area affecting the standard of life. The basis of the corrosion process is the electrochemical charge-transfer reaction, and the center of the subject of the degradation of materials is electrochemical material science.
Download or read book Oxidation and Corrosion of Metals and Alloys by Molten Carbonate written by Mehmet Suha Yazici and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Control written by S. Bradford and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human beings undoubtedly became aware of corrosion just after they made their first metals. These people probably began to control corrosion very so on after that by trying to keep metal away from corrosive environments. "Bring your tools in out of the rain" and "Clean the blood off your sword right after battle" would have been early maxims. Now that the mechanisms of corrosion are better understood, more techniques have been developed to control it. My corrosion experience extends over 10 years in industry and research and over 20 years teaching corrosion courses to university engineering students and industrial consulting. During that time I have developed an approach to corrosion that has successfully trained over 1500 engineers. This book treats corrosion and high-temperature oxidation separately. Corrosion is divided into three groups: (1) chemical dissolution including uniform attack, (2) electrochemical corrosion from either metallurgicalor environmental cells, and (3) corrosive-mechanical interactions. It seems more logical to group corrosion according to mechanisms than to arbitrarily separate them into 8 or 20 different types of corrosion as if they were unrelated. University students and industry personnel alike generally are afraid of chemistry and consequently approach corrosion theory very hesitantly. In this text the electrochemical reactions responsible for corrosion are summed up in only five simple half-cell reactions. When these are combined on a polarization diagram, which is explained in detail, the electrochemical pro cesses become obvious.
Download or read book The Corrosion of Metals written by Ulick Richardson Evans and published by . This book was released on 1924 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Corrosion and Oxidation written by John Michael West and published by Ellis Horwood. This book was released on 1980 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion written by L L Shreir and published by Newnes. This book was released on 2013-10-22 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion, Volume 1: Metal/Environment Reactions is concerned with the subject of corrosion, with emphasis on the control of the environmental interactions of metals and alloys used as materials of construction. Corrosion is treated as a synthesis of corrosion science and corrosion engineering. This volume is comprised of nine chapters; the first of which provides an overview of the principles of corrosion and oxidation, with emphasis on the electrochemical mechanism of corrosion and how the kinetics of cathodic and anodic partial reactions control the rate of overall corrosion reaction. Attention then turns to the effects of environmental factors such as concentration, velocity, and temperature based on the assumption that either the anodic or cathodic reaction, but not both, is rate-controlling. The corrosion of ferrous and non-ferrous metals and alloys, as well as rarer and noble metals, is considered. The reader is also introduced to high-temperature corrosion and mechanical factors that affect corrosion. This book concludes with topics of electrochemistry and metallurgy relevant to corrosion, including the nature of the electrified interface between the metal and the solution; charge transfer across the interface under equilibrium and non-equilibrium conditions; overpotential and the rate of an electrode reaction; and the hydrogen evolution reaction and hydrogen absorption by ferrous alloys. This book will be of value to students as well as workers and engineers in the field of corrosion.
Download or read book Modern Aspects of Electrochemistry written by Ralph E. White and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Modern Aspects contains seven chapters. The major topics covered in the first six chapters of this volume include fundamentals of solid state electrochemistry; kinetics of electrochemical hydrogen entry into metals and alloys; oxidation of organics; fuel cells; electrode kinetics of trace-anion catalysis; nano structural analysis. The last chapter is a corrected version of chapter four from Volume 35. Faisal M. AI-faqeer and Howard W. Pickering begin the first chapter by going back to 1864 and Cailletet who found that some hydrogen evolved and was absorbed by iron when it was immersed in dilute sulfuric acid. The absorption of hydrogen into metals and alloys can lead to catastrophic failures of structures. They discuss the kinetics of electrochemical hydrogen entry into metals and alloys. In chapter three, Clyde L. Briant reviews the electrochemistry, corrosion and hydrogen embrittlement of unalloyed titanium. He begins by reviewing the basic electrochemistry and general corrosion of titanium. He also discusses pitting and galvanostatic corrosion followed by a review of hydrogen embrittlement emphasizing the formation of hydrides and the effect of these on titanium's mechanical properties. Christos Comninellis and Gy6rgy F6ti discuss the oxidative electrochemical processes of organics in chapter three. They begin by defining direct and indirect electrochemical oxidation of organics. They introduce a model that allows them to distinguish between active (strong) and non-active (weak) anodes. Different classes of organic compounds are used for kinetic models of organic oxidation at active and non-active type anodes.
