Download or read book Electrical Power Generation from Residual Biomass by Combustion in Externally Fired Gas Turbines EFGT written by Mathhar Abdelmahdi A. Bdour and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The rising interest in developing gas turbines make it important to investigate them in energy generation from solid biomass. Addiotionally, externally fired gas turbine plant has the advantage of solid fuel flexibility. Pressure and air mass flow through the clean cycle side are optimized to provide the maximum power. Hardware-in-the-loop (HiL) is integrated beside the real combustion process. It serves in being more flexible in tuning plant parameters for several values, for instance, heat exchanger design, compressor and turbine efficiencies, and pressure and mass flow values.ger
Download or read book Energy from Biomass written by Peter Quaak and published by World Bank Publications. This book was released on 1999 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: While energy is essential for development, standard fossil fuels are often in short supply in countries where it is needed most. However, alternative fuel resources abound in the form of agricultural and municipal waste or "biomass." This report reviews the state of the art of biomass combustion and gassification systems, their advantages and disadvantages. It also encourages investment in use of these technologies to enable developing countries to better exploit their biomass resources and help close the gap between their energy needs and their energy supply.
Download or read book A Development Perspective For Biomass Fuelled Electricity Generation Technologies written by Roland Vincent Siemons and published by Clean Fuels b.v.. This book was released on 2002 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Handbook of Biomass Combustion and Co firing written by Jaap Koppejan and published by Earthscan. This book was released on 2012-05-16 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique handbook presents both the theory and application of biomass combustion and co-firing, from basic principles to industrial combustion and environmental impact, in a clear and comprehensive manner. It offers a solid grounding on biomass combustion, and advice on improving combustion systems.Written by leading international academics and industrial experts, and prepared under the auspices of the IEA Bioenergy Implementing Agreement, the handbook is an essential resource for anyone interested in biomass combustion and co-firing technologies varying from domestic woodstoves to utility-scale power generation. The book covers subjects including biomass fuel pre-treatment and logistics, modelling the combustion process and ash-related issues, as well as featuring an overview of the current R&D needs regarding biomass combustion.
Download or read book Coal Abstracts written by and published by . This book was released on 1988 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbines for Efficient Power Generation written by United States. Department of Energy and published by . This book was released on 1978 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strategic Analysis of Biomass and Waste Fuels for Electric Power Generation written by and published by . This book was released on 1993 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy from Biomass written by Peter Quaak and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion for Power Generation and Transportation written by Avinash Kumar Agarwal and published by Springer. This book was released on 2017-01-20 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research monograph presents both fundamental science and applied innovations on several key and emerging technologies involving fossil and alternate fuel utilization in power and transport sectors from renowned experts in the field. Some of the topics covered include: autoignition in laminar and turbulent nonpremixed flames; Langevin simulation of turbulent combustion; lean blowout (LBO) prediction through symbolic time series analysis; lasers and optical diagnostics for next generation IC engine development; exergy destruction study on small DI diesel engine; and gasoline direct injection. The book includes a chapter on carbon sequestration and optimization of enhanced oil and gas recovery. The contents of this book will be useful to researchers and professionals working on all aspects on combustion.
Download or read book Efficiency Performance and Robustness of Gas Turbines written by Albert Brose and published by . This book was released on 2016-04-01 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbine is the engine at the heart of the power plant that produces electric current. A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled to a downstream turbine, and a combustion chamber in between. The basic operation of the gas turbine is similar to that of the steam power plant except that air is used instead of water. Fresh atmospheric air flows through a compressor that brings it to higher pressure. Energy is then added by spraying fuel into the air and igniting it so the combustion generates a high-temperature flow. This high-temperature high-pressure gas enters a turbine, where it expands down to the exhaust pressure, producing a shaft work output in the process. The turbine shaft work is used to drive the compressor and other devices such as an electric generator that may be coupled to the shaft. A gas turbine convert natural gas or other liquid fuels to mechanical energy. This energy then drives a generator that produces electrical energy. It is electrical energy that moves along power lines to homes and businesses. To generate electricity, the gas turbine heats a mixture of air and fuel at very high temperatures, causing the turbine blades to spin. The spinning turbine drives a generator that converts the energy into electricity. The purpose of the gas turbine determines the design so that the most desirable energy form is maximized. Gas turbines are used to power aircraft, trains, ships, electrical generators, and tanks. This book, Efficiency, Performance and Robustness of Gas Turbines, covers a wide range of issues related to analysis of gas turbines and their engineering applications. Gas turbine engine defect diagnostic and condition monitoring systems, operating conditions of open gas turbines, reduction of jet mixing noise, recovery of exhaust heat from gas turbines, appropriate materials and coatings, ultra micro gas turbines and applications of gas turbines are discussed.
Download or read book Near Term Opportunities for Integrating Biomass into the U S Electricity Supply written by David S. Ortiz and published by Rand Corporation. This book was released on 2011-07-29 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass is an increasingly important source of electricity, heat, and liquid fuel. One near-term option for using biomass to generate electricity is to cofire biomass in coal-fired electricity plants. This report focuses on two aspects of biomass use: plant-site modifications, changes in operations, and costs associated with cofiring biomass; and the logistical issues associated with delivering biomass to the plant.
Download or read book Prospects for wood based electricity for the Indonesian National Energy Policy written by Pirard, R. and published by CIFOR. This book was released on 2017-08-18 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve the target of 23% renewable energy by 2020, Indonesia has been actively exploring options to loosen its dependence on fossil fuels. While biofuels have been developing fast and remain a priority for the government, wood-based energy also holds great potential. This report is a first attempt to assess its state of development and feasibility. Wood-based energy could be based on the high-profile large-scale industrial tree plantation program in Indonesia. This is one of the largest in the world with millions of hectares planted, but it has failed to achieve all of its public objectives. The government envisions its revival, with bioenergy as an alternative to the mature pulp and paper market. To do so, a flagship feed-in tariff policy has been put in place as an incentive for power plants to using biomass (or biogas material). Our research – based on intensive interactions with stakeholders at all levels, secondary data and three case studies – leads to one straightforward message that this source of energy is not going to represent a significant share of the energy mix for a long time. Major obstacles include the difficulty in establishing and managing large-scale tree plantations dedicated to energy production with recurrent claims and conflicts on the ground, the inability of the feed-in tariff policy to compensate investors for the risks of shifting to a new type of energy, the absence of subsidies provided to the state-owned electricity company that sees little interest in buying relatively expensive power, and the lack of proof of concept that lowers the probability of significant investments in this field.
Download or read book Electricity from Biomass written by G. Trebbi and published by . This book was released on 1992 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Biogas Handbook written by Arthur Wellinger and published by Elsevier. This book was released on 2013-02-19 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increasing pressures to utilize wastes effectively and sustainably, biogas production represents one of the most important routes towards reaching renewable energy targets. This comprehensive reference on the development and deployment of biogas supply chains and technology reviews the role of biogas in the energy mix and outlines the range of biomass and waste resources for biogas production. Contributors provide detailed coverage of anaerobic digestion for the production of biogas and review the utilization of biogas for various applications. They consider all aspects in the biogas production chain from the origin of the biomass feedstocks, feedstock selection and preparation, the anaerobic digestion process, biogas plant equipment design and operation, through to utilization of the biogas for energy production and the residue, the digestate, which can be used as a biofertilizer. The book also addresses biogas utilization, and explores environmental impacts and commercial market applications. Table of Contents: Biogas as an energy option: An overview Part 1 Biomass resources, feedstock treatment and biogas production: Biomass resources for biogas production; Analysis and characterisation of biogas feedstocks; Storage and pre-treatment of substrates for biogas production; Fundamental science and engineering of the anaerobic digestion process for biogas production; Optimisation of biogas yields from anaerobic digestion by feedstock type; Anaerobic digestion as a key technology for biomass valorisation: Roles and contribution to the energy balance of biofuel chains Part 2 Plant design, engineering, process optimisation and digestate utilization: Design and engineering of biogas plants; Energy flows in biogas plants: Analysis and implications for plant design; Process control in biogas plants; Methane emissions in biogas production; Biogas digestate quality and utilization; Land application of digestate Part 3 Biogas utilisation: international experience and best practice: Biogas cleaning; Biogas up-grading to biomethane; Biomethane injection into natural gas networks; Generation of heat and power from biogas for stationery applications: Boilers, gas engines and turbines, combined heat and power (CHP) plants and fuel cells; Biomethane for transport applications; Market development and certification schemes for biomethane
Download or read book The Exergy Method of Thermal Plant Analysis written by T. J. Kotas and published by Elsevier. This book was released on 2013-10-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Exergy Method of Thermal Plant Analysis aims to discuss the history, related concepts, applications, and development of the Exergy Method - analysis technique that uses the Second Law of Thermodynamics as the basis of evaluation of thermodynamic loss. The book, after an introduction to thermodynamics and its related concepts, covers concepts related to exergy, such as physical and chemical exergy, exergy concepts for a control method and a closed-system analysis, the exergy analysis of simple processes, and the thermocentric applications of exergy. A seven-part appendix is also included. Appendices A-D covers miscellaneous information on exergy, and Appendix E features charts of thermodynamic properties. Appendix F is a glossary of terms, and Appendix G contains the list of references. The text is recommended for physicists who would like to know more about the Exergy Method, its underlying principles, and its applications not only in thermal plant analysis but also in certain areas.
Download or read book Energy Generation Cogeneration from Wood written by and published by . This book was released on 1980 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomass as Feedstock for a Bioenergy and Bioproducts Industry written by and published by . This book was released on 2005 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy (DOE) and the U.S. Department of Agriculture (USDA) are both strongly committed to expanding the role of biomass as an energy source. In particular, they support biomass fuels and products as a way to reduce the need for oil and gas imports; to support the growth of agriculture, forestry, and rural economies; and to foster major new domestic industries-- biorefineries--making a variety of fuels, chemicals, and other products. As part of this effort, the Biomass R AND D Technical Advisory Committee, a panel established by the Congress to guide the future direction of federally funded biomass R AND D, envisioned a 30 percent replacement of the current U.S. petroleum consumption with biofuels by 2030. Biomass--all plant and plant-derived materials including animal manure, not just starch, sugar, oil crops already used for food and energy--has great potential to provide renewable energy for America s future. Biomass recently surpassed hydropower as the largest domestic source of renewable energy and currently provides over 3 percent of the total energy consumption in the United States. In addition to the many benefits common to renewable energy, biomass is particularly attractive because it is the only current renewable source of liquid transportation fuel. This, of course, makes it invaluable in reducing oil imports--one of our most pressing energy needs. A key question, however, is how large a role could biomass play in responding to the nation's energy demands. Assuming that economic and financial policies and advances in conversion technologies make biomass fuels and products more economically viable, could the biorefinery industry be large enough to have a significant impact on energy supply and oil imports? Any and all contributions are certainly needed, but would the biomass potential be sufficiently large to justify the necessary capital replacements in the fuels and automobile sectors?
