Download or read book Electrical and Thermal Percolation in Carbon Nanotube polymer Composites written by Byung-Wook Kim and published by . This book was released on 2014 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical and thermal properties of carbon-nanotube (CNT)/polymer composites were investigated through percolating behavior of conducting fillers in insulating matrix. Synthesis methodology has been found using a blend of solution processing, which was adapted to facilitate uniformly distributed CNTs in polymer matrix and consequently to contribute to percolation. The onset of percolation thresholds depending on aspect ratio of fillers were theoretically estimated by the excluded volume method as well as experimentally examined with a power relation of the both electrical and thermal conductivities. Consistent modeling of the both electrical and thermal conductivity anisotropy, in addition to the incorporation of interfacial resistance between connected conducting CNT fillers, was used to understand the underlying transport mechanisms and variations. Furthermore, we report a decrease in the specific heat capacity of the composites at a particular nanotube filler fraction, corresponding to the electrical and thermal conductivity percolation threshold. Extensive calibration and characterization of two different methods were accomplished for the specific heat capacity measurement, and degree of crystallinity through x-ray diffraction implied how degree of disorder would alter depending on arranging nanotubes in the polymer matrix. We explained such change in terms of the entropic configuration determined by number of isolated or connected nanotube fillers. Our investigations could yield better insight into percolation phenomena, of wide importance in the theory of networks, and the optimal conditions of CNT connectivity and dispersion for various applications.
Download or read book Carbon Nanotube polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2013 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to summarize the basic chemical aspects for obtaining multifunctional carbon nanotube-based polymer composites, but also to highlight some of the most remarkable advances that occurred in the field during the last recent years.
Download or read book Carbon Nanotube Based Composites written by Antonio Pantano and published by Smithers Rapra. This book was released on 2012-09-28 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have amazing properties and a key way to take advantage of this is by incorporating nanotubes into a matrix to build composite materials. The best candidates for this task are undoubtedly polymers. Almost every characteristic of a polymer can be significantly enhanced by adding carbon nanotubes and as a result, new potential applications of carbon nanotube enhanced polymer composites are discovered every day. However, before carbon nanotube enhanced polymer composites become commonplace there are some tough challenges that need to be overcome. This book reviews the status of worldwide research in both single-walled and multi-walled carbon nanotube based composites. It serves as a practical guide on carbon nanotube based composites and a reference to students and researchers from the academia and industry.
Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.
Download or read book Carbon Nanotube Reinforced Composites written by Marcio Loos and published by Elsevier. This book was released on 2014-09-11 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube Reinforced Composites introduces a wide audience of engineers, scientists and product designers to this important and rapidly expanding class of high performance composites. Dr Loos provides readers with the scientific fundamentals of carbon nanotubes (CNTs), CNT composites and nanotechnology in a way which will enable them to understand the performance, capability and potential of the materials under discussion. He also investigates how CNT reinforcement can be used to enhance the mechanical, electrical and thermal properties of polymer composites. Production methods, processing technologies and applications are fully examined, with reference to relevant patents. Finally, health and safety issues related to the use of CNTs are investigated. Dr. Loos compares the theoretical expectations of using CNTs to the results obtained in labs, and explains the reasons for the discrepancy between theoretical and experimental results. This approach makes the book an essential reference and practical guide for engineers and product developers working with reinforced polymers – as well as researchers and students in polymer science, materials and nanotechnology. A wealth of applications information is included, taken from the wide range of industry sectors utilizing CNT reinforced composites, such as energy, coatings, defense, electronics, medical devices, and high performance sports equipment. - Introduces a wide range of readers involved in plastics engineering, product design and manufacturing to the relevant topics in nano-science, nanotechnology, nanotubes and composites. - Assesses effects of CNTs as reinforcing agents, both in a materials context and an applications setting. - Focuses on applications aspects – performance, cost, health and safety, etc – for a wide range of industry sectors, e.g. energy, coatings, defense, electronics, medical devices, high performance sports equipment, etc.
Download or read book Electrical Conductivity in Polymer Based Composites written by Reza Taherian and published by William Andrew. This book was released on 2018-11-30 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Conductivity in Polymer-Based Composites: Experiments, Modelling and Applications offers detailed information on all aspects of conductive composites. These composites offer many benefits in comparison to traditional conductive materials, and have a broad range of applications, including electronic packaging, capacitors, thermistors, fuel cell devices, dielectrics, piezoelectric functions and ferroelectric memories. Sections cover the theory of electrical conductivity and the different categories of conductive composites, describing percolation threshold, tunneling effect and other phenomena in the field. Subsequent chapters present thorough coverage of the key phases in the development and use of conductive composites, including manufacturing methods, external parameters, applications, modelling and testing methods. This is an essential source of information for materials scientists and engineers working in the fields of polymer technology, processing and engineering, enabling them to improve manufacture and testing methods, and to benefit fully from applications. The book also provides industrial and academic researchers with a comprehensive and up-to-date understanding of conductive composites and related issues. - Explains the methods used in the manufacture and testing of conductive composites, and in the modeling of electrical conductivity - Contains specialized information on the full range of applications for conductive composites, including conductive adhesives or pastes - Brings scientists, engineers and researchers up-to-date with the latest advances in the field
Download or read book Carbon Nanotube Polymer Composites written by Brian P. Grady and published by John Wiley & Sons. This book was released on 2011-07-08 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accessible compendium of polymers in carbon nanotubes (CNTs) Carbon nanotubes (CNTs)—extremely thin tubes only a few nanometers in diameter but able to attain lengths thousands of times greater—are prime candidates for use in the development of polymer composite materials. Bringing together thousands of disparate research works, Carbon Nanotube-Polymer Composites: Manufacture, Properties, and Applications covers CNT-polymers from synthesis to potential applications, presenting the basic science and engineering of this dynamic and complex area in an accessible, readable way. Designed to be of use to polymer scientists, engineers, chemists, physicists, and materials scientists, the book covers carbon nanotube fundamentals to help polymer experts understand CNTs, and polymer physics to help those in the CNT field, making it an invaluable resource for anyone working with CNT-polymer composites. Detailed chapters describe the mechanical, rheological, electrical, and thermal properties of carbon nanotube-polymer composites. Including a glossary that defines key terms, Carbon Nanotube-Polymer Composites is essential reading for anyone looking to gain a fundamental understanding of CNTs and polymers, as well as potential and current applications, including electronics (shielding and transparent electrodes), flame retardants, and electromechanics (sensors and actuators), and their challenges.
Download or read book Carbon Containing Polymer Composites written by Mostafizur Rahaman and published by Springer. This book was released on 2018-10-05 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the methods synthesizing various carbon materials, like graphite, carbon blacks, carbon fibers, carbon nanotubes, and graphene. It also details different functionalization and modification processes used to improve the properties of these materials and composites. From a geometrical–structural point of view, it examines different properties of the composites, such as mechanical, electrical, dielectric, thermal, rheological, morphological, spectroscopic, electronic, optical, and toxic, and describes the effects of carbon types and their geometrical structure on the properties and applications of composites.
Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.
Download or read book A Review and Analysis of Electrical Percolation in Carbon Nanotube Polymer Composites written by Wolfgang Bauhofer and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2013-03-01 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book Polymer Carbon Nanotube Composites written by Tony McNally and published by Elsevier. This book was released on 2011-03-28 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of polymer carbon nanotube (CNT) composites is the key to these materials finding new applications in a wide range of industries, including but not limited to electronics, aerospace and biomedical/bioengineering. Polymer-carbon nanotube composites provides comprehensive and in-depth coverage of the preparation, characterisation, properties and applications of these technologically interesting new materials.Part one covers the preparation and processing of composites of thermoplastics with CNTs, with chapters covering in-situ polymerization, melt processing and CNT surface treatment, as well as elastomer and thermoset CNT composites. Part two concentrates on properties and characterization, including chapters on the quantification of CNT dispersion using microscopy techniques, and on topics as diverse as thermal degradation of polymer/CNT composites, the use of rheology, Raman spectroscopy and multi-scale modelling to study polymer/CNT composites, and CNT toxicity. In part three, the applications of polymer/CNT composites are reviewed, with chapters on specific applications such as in fibres and cables, bioengineering applications and conductive polymer CNT composites for sensing.With its distinguished editors and international team of contributors, Polymer-carbon nanotube composites is an essential reference for scientists, engineers and designers in high-tech industry and academia with an interest in polymer nanotechnology and nanocomposites. - Provides comprehensive and in-depth coverage of the preparation, characterisation and properties of these technologically interesting new materials - Reviews the preparation and processing of composites of thermoplastics with CNTs, covering in-situ polymerization, melt processing and CNT surface treatment - Explores applications of polymer/CNT composites such as in fibres and cables, bioengineering applications and conductive polymer CNT composites for sensing
Download or read book Micromechanics Modeling of the Multifunctional Nature of Carbon Nanotube polymer Nanocomposites written by Gary Don Seidel and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The present work provides a micromechanics approach based on the generalized self-consistent composite cylinders method as a non-Eshelby approach towards for assessing the impact of carbon nanotubes on the multi-functional nature of nanocom-posites in which they are a constituent. Emphasis is placed on the effective elastic properties as well as electrical and thermal conductivities of nanocomposites con-sisting of randomly oriented single walled carbon nanotubes in epoxy. The effective elastic properties of aligned, as well as clustered and well-dispersed nanotubes in epoxy are discussed in the context of nanotube bundles using both the generalized self-consistent composite cylinders method as well as using computational microme-chanics techniques. In addition, interphase regions are introduced into the composite cylinders assemblages to account for the varying degrees of load transfer between nanotubes and the epoxy as a result of functionalization or lack thereof. Model pre-dictions for randomly oriented nanotubes both with and without interphase regions are compared to measured data from the literature with emphasis placed on assessing the bounds of the effective nanocomposite properties based on the uncertainty in the model input parameters. The generalized self-consistent composite cylinders model is also applied to model the electrical and thermal conductivity of carbon nanotube-epoxy nanocomposites. Recent experimental observations of the electrical conductivity of carbon nanotube polymer composites have identifed extremely low percolation limits as well as a per-ceived double percolation behavior. Explanations for the extremely low percolation limit for the electrical conductivity of these nanocomposites have included both the creation of conductive networks of nanotubes within the matrix and quantum effects such as electron hopping or tunneling. Measurements of the thermal conductivity have also shown a strong dependence on nanoscale effects. However, in contrast, these nanoscale effects strongly limit the ability of the nanotubes to increase the thermal conductivity of the nanocomposite due to the formation of an interfacial thermal resistance layer between the nanotubes and the surrounding polymer. As such, emphasis is placed here on the incorporation of nanoscale effects, such as elec-tron hopping and interfacial thermal resistance, into the generalized self-consistent composite cylinder micromechanics model.
Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions
Download or read book Carbon based Polymer Nanocomposites for Environmental and Energy Applications written by Ahmad Fauzi Ismail and published by Elsevier. This book was released on 2018-03-28 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Polymer Nanocomposites for Environmental and Energy Applications provides the fundamental physico-chemical characterizations of recently explored carbon-based polymer nanocomposites, such as carbon nanotubes, graphene and its derivatives, nanodiamond, fullerenes and other nano-sized carbon allotropes. The book also covers the applications of carbon-based polymer nanocomposite in the environmental and energy fields. Topics range from the various approaches that have been explored and developed for the fabrication of carbon-based polymer nanocomposite, to their applications in tackling environmental and energy related issues. - Provides a clear picture of the current state-of-the-art and future trends in carbon-based polymer nanomaterials - Explains the interactions between nanofiller-polymer matrices and mechanisms related to applications in environmental pollution and energy shortage - Includes computational and experimental studies of the physical and chemical properties of carbon-based polymer nanocomposites - Features chapters written by world leading experts
Download or read book Polymer Nanocomposite Materials written by Ye Zhou and published by John Wiley & Sons. This book was released on 2021-06-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Nanocomposite Materials Discover an authoritative overview of zero-, one-, and two-dimensional polymer nanomaterials Polymer Nanocomposite Materials: Applications in Integrated Electronic Devices delivers an original and insightful treatment of polymer nanocomposite applications in energy, information, and biotechnology. The book systematically reviews the preparation and characterization of polymer nanocomposites from zero-, one-, and two-dimensional nanomaterials. The two distinguished editors have selected resources that thoroughly explore the applications of polymer nanocomposites in energy, information, and biotechnology devices like sensors, solar cells, data storage devices, and artificial synapses. Academic researchers and professional developers alike will enjoy one of the first books on the subject of this environmentally friendly and versatile new technology. Polymer Nanocomposite Materials discusses challenges associated with the devices and materials, possible strategies for future directions of the technology, and the possible commercial applications of electronic devices built on these materials. Readers will also benefit from the inclusion of: A thorough introduction to the fabrication of conductive polymer composites and their applications in sensors An exploration of biodegradable polymer nanocomposites for electronics and polymer nanocomposites for photodetectors Practical discussions of polymer nanocomposites for pressure sensors and the application of polymer nanocomposites in energy storage devices An examination of functional polymer nanocomposites for triboelectric nanogenerators and resistive switching memory Perfect for materials scientists and polymer chemists, Polymer Nanocomposite Materials: Applications in Integrated Electronic Devices will also earn a place in the libraries of sensor developers, electrical engineers, and other professionals working in the sensor industry seeking an authoritative one-stop reference for nanocomposite applications.
Download or read book Carbon Nanotubes written by Siva Yellampalli and published by BoD – Books on Demand. This book was released on 2011-08-17 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer nanocomposites are a class of material with a great deal of promise for potential applications in various industries ranging from construction to aerospace. The main difference between polymeric nanocomposites and conventional composites is the filler that is being used for reinforcement. In the nanocomposites the reinforcement is on the order of nanometer that leads to a very different final macroscopic property. Due to this unique feature polymeric nanocomposites have been studied exclusively in the last decade using various nanofillers such as minerals, sheets or fibers. This books focuses on the preparation and property analysis of polymer nanocomposites with CNTs (fibers) as nano fillers. The book has been divided into three sections. The first section deals with fabrication and property analysis of new carbon nanotube structures. The second section deals with preparation and characterization of polymer composites with CNTs followed by the various applications of polymers with CNTs in the third section.
