Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 39 (thesis year 1994) a total of 13,953 thesis titles from 21 Canadian and 159 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 39 reports theses submitted in 1994, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Thin Film Diamond I written by Christopher Nebel and published by Academic Press. This book was released on 2003-12-12 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reviews the state of the art of thin film diamond, a very promising new semiconductor that may one day rival silicon as the material of choice for electronics. Diamond has the following important characteristics; it is resistant to radiation damage, chemically inert and biocompatible and it will become "the material" for bio-electronics, in-vivo applications, radiation detectors and high-frequency devices. Thin-Film Diamond is the first book to summarize state of the art of CVD diamond in depth. It covers the most recent results regarding growth and structural properties, doping and defect characterization, hydrogen in and on diamond as well as surface properties in general, applications of diamond in electrochemistry, as detectors, and in surface acoustic wave devices.· Accessible by both experts and non-experts in the field of semi-conductors research and technology, each chapter is written in a tutorial format· Helping engineers to manufacture devices with optimized electronic properties· Truly international, this volume contains chapters written by recognized experts representing academic and industrial institutions from Europe, Japan and the US
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Coatings and Thin Films 1994 written by and published by . This book was released on 1994 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SiC Natural and Synthetic Diamond and Related Materials written by A.A. Gippius and published by Elsevier. This book was released on 1992-04-24 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the burgeoning field of wide band gap materials. The 64 contributed and invited papers will do much to stimulate the well-justified ongoing work, both theoretical and experimental, in this area. The high standard of the papers attests to the significant progress that has been made in this field, as well as reporting on the challenging problems that still remain to be solved.
Download or read book Advances in Electronics Communication and Computing written by Akhtar Kalam and published by Springer. This book was released on 2017-10-27 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of research work in the interdisciplinary areas of electronics, communication, and computing. This book is specifically targeted at students, research scholars and academicians. The book covers the different approaches and techniques for specific applications, such as particle-swarm optimization, Otsu’s function and harmony search optimization algorithm, triple gate silicon on insulator (SOI)MOSFET, micro-Raman and Fourier Transform Infrared Spectroscopy (FTIR) analysis, high-k dielectric gate oxide, spectrum sensing in cognitive radio, microstrip antenna, Ground-penetrating radar (GPR) with conducting surfaces, and digital image forgery detection. The contents of the book will be useful to academic and professional researchers alike.
Download or read book Physics and Applications of CVD Diamond written by Satoshi Koizumi and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here, leading scientists report on why and how diamond can be optimized for applications in bioelectronic and electronics. They cover such topics as growth techniques, new and conventional doping mechanisms, superconductivity in diamond, and excitonic properties, while application aspects include quantum electronics at room temperature, biosensors as well as diamond nanocantilevers and SAWs. Written in a review style to make the topic accessible for a wider community of scientists working in interdisciplinary fields with backgrounds in physics, chemistry, biology and engineering, this is essential reading for everyone working in environments that involve conventional electronics, biotechnology, quantum computing, quantum cryptography, superconductivity and light emission from highly excited excitonic systems.
Download or read book Ceramic Abstracts written by and published by . This book was released on 1999 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diamond Electronic Properties and Applications written by Lawrence S. Pan and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of diamond for electronic applications is not a new idea. As early as the 1920's diamonds were considered for their use as photoconductive detectors. However limitations in size and control of properties naturally limited the use of diamond to a few specialty applications. With the development of diamond synthesis from the vapor phase has come a more serious interest in developing diamond-based electronic devices. A unique combination of extreme properties makes diamond partiCularly well suited for high speed, high power, and high temperature applications. Vapor phase deposition of diamond allows large area films to be deposited, whose properties can potentially be controlled. Since the process of diamond synthesis was first realized, great progress have been made in understanding the issues important for growing diamond and fabricating electronic devices. The quality of both intrinsic and doped diamond has improved greatly to the point that viable applications are being developed. Our understanding of the properties and limitations has also improved greatly. While a number of excellent references review the general properties of diamond, this volume summarizes the great deal of literature related only to electronic properties and applications of diamond. We concentrate only on diamond; related materials such as diamond-like carbon (DLC) and other wide bandgap semiconductors are not treated here. In the first chapter Profs. C. Y. Fong and B. M. Klein discuss the band structure of single-crystal diamond and its relation to electronic properties.
Download or read book Power Electronics Device Applications of Diamond Semiconductors written by Satoshi Koizumi and published by Woodhead Publishing. This book was released on 2018-06-29 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Device Applications of Diamond Semiconductors presents state-of-the-art research on diamond growth, doping, device processing, theoretical modeling and device performance. The book begins with a comprehensive and close examination of diamond crystal growth from the vapor phase for epitaxial diamond and wafer preparation. It looks at single crystal vapor deposition (CVD) growth sectors and defect control, ultra high purity SC-CVD, SC diamond wafer CVD, heteroepitaxy on Ir/MqO and needle-induced large area growth, also discussing the latest doping and semiconductor characterization methods, fundamental material properties and device physics. The book concludes with a discussion of circuits and applications, featuring the switching behavior of diamond devices and applications, high frequency and high temperature operation, and potential applications of diamond semiconductors for high voltage devices. - Includes contributions from today's most respected researchers who present the latest results for diamond growth, doping, device fabrication, theoretical modeling and device performance - Examines why diamond semiconductors could lead to superior power electronics - Discusses the main challenges to device realization and the best opportunities for the next generation of power electronics
Download or read book Handbook of Thin Films written by Hari Singh Nalwa and published by Elsevier. This book was released on 2001-11-17 with total page 3436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This five-volume handbook focuses on processing techniques, characterization methods, and physical properties of thin films (thin layers of insulating, conducting, or semiconductor material). The editor has composed five separate, thematic volumes on thin films of metals, semimetals, glasses, ceramics, alloys, organics, diamonds, graphites, porous materials, noncrystalline solids, supramolecules, polymers, copolymers, biopolymers, composites, blends, activated carbons, intermetallics, chalcogenides, dyes, pigments, nanostructured materials, biomaterials, inorganic/polymer composites, organoceramics, metallocenes, disordered systems, liquid crystals, quasicrystals, and layered structures.Thin films is a field of the utmost importance in today's materials science, electrical engineering and applied solid state physics; with both research and industrial applications in microelectronics, computer manufacturing, and physical devices.Advanced, high-performance computers, high-definition TV, digital camcorders, sensitive broadband imaging systems, flat-panel displays, robotic systems, and medical electronics and diagnostics are but a few examples of miniaturized device technologies that depend the utilization of thin film materials. The Handbook of Thin Films Materials is a comprehensive reference focusing on processing techniques, characterization methods, and physical properties of these thin film materials.
Download or read book Hydrogen Materials Science and Chemistry of Metal Hydrides written by T. Nejat Veziroglu and published by Springer Science & Business Media. This book was released on 2002-10-31 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2001 International Conference «Hydrogen Materials Science and Chemistry of Metal Hydrides» (ICHMS'2001) was held in the picturesque town Alushta (Crimea, Ukraine) on the bank of Black Sea in September 16-22, 2001. In the tradition of the earlier ICHMS conferences, the 7th ICHMS'2001 provided an international forum for the presentation and discussion of the latest research on transition to hydrogen-based energy systems, technologies for hydrogen production, storage, utilization, materials, energy and environmental problems. The aim of ICHMS '200 1 was to provide an overview of the latest information on research and development in the different topics cited above. The representatives from industry, public laboratories, universities and governmental agencies could meet, discuss and present the most recent advances in hydrogen concepts, processes and systems, to evaluate current progress in these areas of investigations and to identify promising research directions for the future. The ICHMS'2001 was the first conference in this series, where a related new important topic of considerable current interest on fullerene-related materials as hydrogen storage was included into the conference program. The hydrogen sorbing properties of newly discovered carbon nanostructural materials inspire hydrogen scientists with optimism. Thus, the ICHMS'2001 conference was unique in bringing together hydrogen and carbon materials researchers and engineers from developed countries of Europe and America, new independent states of FSU and other countries for discussions in advanced materials development and applications.
Download or read book Comprehensive Hard Materials written by Daniele Mari and published by Newnes. This book was released on 2014-02-01 with total page 1809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Hard Materials, Three Volume Set deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued research and development of such materials is critical to meet the technological challenges of the future. Users of this work can improve their knowledge of basic principles and gain a better understanding of process/structure/property relationships. With the convergence of nanotechnology, coating techniques, and functionally graded materials to the cognitive science of cemented carbides, cermets, advanced ceramics, super-hard materials and composites, it is evident that the full potential of this class of materials is far from exhausted. This work unites these important areas of research and will provide useful insights to users through its extensive cross-referencing and thematic presentation. To link academic to industrial usage of hard materials and vice versa, this work deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds.
Download or read book Proceedings of the 37th International MATADOR Conference written by Srichand Hinduja and published by Springer Science & Business Media. This book was released on 2012-10-08 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here are 97 refereed papers given at the 37th MATADOR Conference held at The University of Manchester in July 2012. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The Proceedings of this Conference contain original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications in aerospace, automotive, biomedical, energy, consumable goods and process industries. The papers in this volume reflect: the importance of manufacturing to international wealth creation; the emerging fields of micro- and nano-manufacture; the increasing trend towards the fabrication of parts using lasers; the growing demand for precision engineering and part inspection techniques, and the changing trends in manufacturing within a global environment.
Download or read book Physics of Semiconductor Devices written by Vikram Kumar and published by Allied Publishers. This book was released on 2002 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Second International Symposium on Diamond Materials written by A. J. Purdes and published by . This book was released on 1991 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EuroCVD 17 CVD 17 written by M. T. Swihart and published by The Electrochemical Society. This book was released on 2009-09 with total page 1352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions includes papers presented at the 2009 EuroCVD-17 and CVD 17 symposium. Topical areas covered include fundamentals of chemical vapor deposition (CVD), chemistry of precursors for CVD, synthesis of nanomaterials by CVD and related methods, industrial applications of CVD, and novel CVD reactors and processes. This issue is sold as a two-part set and also includes a CD-ROM of the entire issue.
