Download or read book Elastomer Methyl Methyl Vinyl Silicone MQ MVQ High Temperature Gas Turbine Engine Oil Phosphate Esther Hydraulic Fluid Resistant High Strength High Tear High Modulus 55 to 65 Type A Hardness For Products in High Temperature Environments Gas Turbine Engine Oils written by AMS CE Elastomers Committee and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a methyl or methyl vinyl silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material. This document was brought out of Stabilization to better define the thermal shock testing and to change the horizontal burn test method from one more specific to plastics, to a test method more specific to aerospace elastomers. Reformatted into the new AMS3000 series template which includes a Five-Year preproduction re-testing requirement.

Download or read book Elastomer Phenyl Methyl Vinyl Silicone PVMQ Low Temperature Engine Oil Resistant High Strength High Tear 55 to 65 Type A Hardness For Products in Aircraft Piston Engine Oil Low Temperature Environments written by AMS CE Elastomers Committee and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a phenyl vinyl silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, molded shapes, and extrusions. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material. For Five-Year Review and to incorporate the new AMS3XXX series template format. Extends Preproduction Testing cycle to 5 years from 3 years.

Download or read book Elastomer Methyl Methyl Vinyl Silicone MQ VMQ High Temperature Resistant High Strength Tear Resistant 45 to 55 Type A Durometer Hardness written by AMS CE Elastomers Committee and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a methyl or methyl vinyl silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. For molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications, use the AMS7000 series specification. For Five-Year Review and to incorporate the new 3XXX Series template format. Extends preproduction testing cycle from 3 to 5 years per CE committee direction.

Download or read book Elastomer Methyl Phenyl Vinyl Silicone PVMQ Very Low Temperature Aircraft Piston Engine Oil Resistant High Strength Tear Resistant 45 to 55 Durometer Type A Hardness For Products in Aircraft Piston Engine Oil Low Temperature Environments written by AMS CE Elastomers Committee and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a methyl phenyl vinyl silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, molded shapes, and extrusions. For molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the corresponding AMS7000 series specification. For Five-Year Review and to incorporate the new AMS3XXX series template format. Extends preproduction testing cycle from 3 to 5 years per CE committee direction.

Download or read book Rubber Methyl Vinyl Silicone MVQ High Temperature Resistant Low Compression Set 65 75 Type A Hardness For Seals in a Static Application Resistant to 500 F 260 C written by AMS CE Elastomers Committee and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a Methyl Vinyl Silicone (MVQ) rubber in the form of molded rings for aeronautical and aerospace applications. For sheet, strip, tubing, extrusions, and molded shapes it is the responsibility of the user to determine suitability. For Five-Year Review and to reformat to the latest AMS7XXX series template.

Download or read book Rubber Fluorosilicone FVMQ Engine Oil written by AMS CE Elastomers Committee and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This material has resistance to diester-based engine oil (MIL-PRF-7808) and fuel, but usage is not limited to such applications. This material is not suitable for use in synthetic phosphate ester based hydraulic fluids (AS1241) or helicopter transmission lubricating oils (DOD-PRF-85734, MIL-PRF-32538). For gas turbine engine lubricating oils (AS5780, MIL-PRF-23699), resistance varies by class and should be evaluated individually (see Note regarding high performance oils). This material has a typical service temperature range of -70 to +392 °F (-56.7 to +200 °C) for Class 1 and Class 2 and -70 to +437 °F (-56.7 to +225 °C) for Class 3. The service temperature range of the material is a general temperature range, but the presence of particular fluids and specific design requirements may modify this range. Each application should be considered separately. It is the responsibility of the user to determine that this specification is appropriate for the environments (temperature range, fluids exposure, etc.) in which it is sought to be used. Superseding MIL-DTL-25988 and adding a Qualified Product List for Type I materials. Updating to 7xxx template for Type I and 3xxx template for Type II where possible.

Download or read book Elastomer Methyl Phenyl Vinyl Silicone Rubber PVMQ Extreme Low Temperature Resistant 15 30 Type A Hardness written by AMS CE Elastomers Committee and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers an extreme low-temperature-resistant Methyl Phenyl Vinyl Silicone(PVMQ) elastomer that can be used to manufacture product in the form of sheet, strip, extrusions, and molded shapes. For molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, use the AMS7XXX specification. Five-Year Review and update to the latest AMS3XXX series template.

Download or read book Rubber Fluorocarbon Elastomer FKM 70 to 80 Hardness Low Temperature Sealing Tg 22 F 30 C For Elastomeric Shapes Or Parts in Gas Turbine Engine Oil Fuel and Hydraulic Systems written by AMS CE Elastomers Committee and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a high temperature, compression set and fluid resistant fluorocarbon (FKM) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes for aeronautical and aerospace applications. This specification supersedes AMS-R-83485 and creates two specifications: AMS3000-series and AMS7000-series, with a new part specification added. The technical requirements of AMS-R-83485 have been maintained, with the addition of a long-term compression set requirement, replacement of AMS3021 (diester) with BP Reference Oil 300, AMS3085 (representative of HTS class gas turbine lubricants), and the addition of a glass transition (Tg) value/requirement. AS83485 part standard will supersede AMS-R-83485/1.

Download or read book Rubber Fluorocarbon Elastomer FKM Aircraft Engine Oil Fuel and Hydraulic Fluid Resistant 70 to 80 Shore Type A Hardness Low Temperature Sealing Tg 47 F 43 9 C for Elastomeric Seals in Aircraft Engine Fuel and Hydraulic Systems written by AMS CE Elastomers Committee and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers high temperature, compression set, and fluid resistant fluorocarbon (FKM) elastomer in the form of molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. Specification covers a grade of fluorocarbon elastomer capable of meeting glass transition Tg -47 °F (-43.9 °C).

Download or read book Perfluorocarbon FFKM Engine Oil Fuel and Hydraulic Fluid Resistant 70 to 80 Hardness For High Temperature Seals in Engine Oil Systems Fuel Systems and Hydraulic Systems written by AMS CE Elastomers Committee and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a Perfluorocarbon (FFKM) rubber in the form of molded rings, compression seals, o-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. Specification has been revised to incorporate AMS3085 (Reference Oil 300) to replace AMS3021 (Stauffer 7700), to increase the temperature for testing AMS3085 from 175 °C to 200 °C, Addition of compression set testing in AMS3085 as well as long term compression set testing (Table 1 3.2.7), to modify the acceptance tests (Table 2 and 3), to include qualification by responsible QPL agency to a Qualified Products List (QPL.) and to use the new specification template developed by the CE Committee.

Download or read book High Temperature Siloxane Elastomers written by Petar R. Dvornic and published by Wepf. This book was released on 1990 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Elastomer Fluorosilicone Rubber FVMQ High Temperature High Modulus Fuel and Oil Resistant 70 80 Shore A Hardness For Products in Fuel Systems Lubricating Oils written by AMS CE Elastomers Committee and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a fluorosilicone (FVMQ) elastomer that can be used to manufacture product in the form of sheet, strip, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material. Five-Year Review and update of specification and to incorporate new AMS3XXX series template format.

Download or read book Elastomer Silicone Rubber MQ VMQ Flame Retardant Low Smoke Density Low Smoke Toxicity High Strength 65 75 Durometer Type A Hardness For Products in Pressurized Aircraft Compartment Interiors written by AMS CE Elastomers Committee and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of molded sheet, strips, and shapes, color coded white in accordance with ARP1527. Five-Year Review and update of this specification and to incorporate new AMS3XXX series template.

Download or read book Elastomer Silicone Rubber MQ VMQ General Purpose 55 65 Durometer Type A Hardness written by AMS CE Elastomers Committee and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material. Five-Year Review and update of this specification and to incorporate new AMS3XXX series template format.

Download or read book Rubber Fluorocarbon Elastomer FKM 70 to 80 Hardness Low Temperature Sealing Tg 40 F 40 C For Elastomeric Parts in Aircraft Engine Oil Fuel and Hydraulics Systems written by AMS CE Elastomers Committee and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers high temperature, compression set and fluid resistant fluorocarbon elastomer material to be used in the form of sheet, strip, tubing, extrusions and molded shapes for aeronautical and aerospace applications.This specification should not be used to address products such as O-rings, compression seals, O-ring cord, and molded-in-place gaskets. For those applications AMS7379 should be used. Specification covers a grade of fluoroelastomer capable of meeting a glass transition (Tg) value of -40°F (-40°C).

Download or read book Fluorocarbon Elastomer FKM High Temperature HTS Oil Resistant Fuel Resistant Low Compression Set 70 to 80 Hardness Low Temperature Tg 22 F 30 C for Seals in Oil Fuel Specific Hydraulic Systems written by AMS CE Elastomers Committee and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a high temperature, compression set, and fluid resistant fluorocarbon (FKM) elastomer in the form of molded O-rings, molded compression seals, molded O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. For sheet, strip, tubing, extrusions, and molded shapes, use the AMS3384 specification. Update to latest AMS7xxx template.

Download or read book Rubber Vinyl Methyl Silicone VMQ Hot Air Resistant Low Compression Set 70 to 80 Type A Hardness for Seals in Hot Air Systems written by AMS CE Elastomers Committee and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a silicone (VMQ) rubber in the form of molded rings. These rings have been used typically as sealing rings for service from -65 to +260 °C (-85 to +500 °F) in contact with air, but usage is not limited to such applications. The cross-section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness. This update performs the Five-Year Review and incorporates previous balloted items and is a complete revision. Also, the latest AMS7XXX template was used.