Download or read book Elasto impact and Friction in Dynamic Systems written by George Timothy Flowers and published by . This book was released on 1996 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of 14 papers from the November 1996 conference in two sections on analytical and experimental aspects of friction in structural systems and vibration in impacting systems. Subjects include nonlinearities due to joint friction and clearance in a structural dynamic test fixture, experimen

Download or read book Applied Nonlinear Dynamics and Chaos of Mechanical Systems with Discontinuities written by Marian Wiercigroch and published by World Scientific. This book was released on 2000 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Consisting primarily of contributions written by engineers from Europe, Asia, and the US, this volume provides a general methodology for describing, solving, and analyzing discontinuous systems. The focus is on mechanical engineering problems where clearances, piecewise stiffness, intermittent contact, variable friction, or other forms of discontinuity occur. Practical applications include vibration absorbers, percussive drilling of hard materials, and dynamics of metal cutting. Of likely interest to new and experienced researchers working in the field of applied mathematics and physics, mechanical and civil engineering, and manufacturing. Lacks a subject index. Annotation copyrighted by Book News, Inc., Portland, OR.

Download or read book IUTAM Symposium on New Applications of Nonlinear and Chaotic Dynamics in Mechanics written by Francis C. Moon and published by Springer Science & Business Media. This book was released on 1998-10-31 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research results in the area of applied nonlinear dynamics and chaos theory. Papers by three academic generations address new applications of nonlinear dynamics to mechanics, including fluid-structure interaction, machining and mechanics of solids, and many other applications.

Download or read book Vibro Impact Dynamics written by Raouf A. Ibrahim and published by Springer Science & Business Media. This book was released on 2009-05-12 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of vibro-impact dynamics falls into three main categories: modeling, mapping and applications. This text covers the latest in those studies plus selected deterministic and stochastic applications. It includes a bibliography exceeding 1,100 references.

Download or read book Modeling Analysis And Control Of Dynamical Systems With Friction And Impacts written by Pawel Olejnik and published by #N/A. This book was released on 2017-07-07 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed primarily towards physicists and mechanical engineers specializing in modeling, analysis, and control of discontinuous systems with friction and impacts. It fills a gap in the existing literature by offering an original contribution to the field of discontinuous mechanical systems based on mathematical and numerical modeling as well as the control of such systems. Each chapter provides the reader with both the theoretical background and results of verified and useful computations, including solutions of the problems of modeling and application of friction laws in numerical computations, results from finding and analyzing impact solutions, the analysis and control of dynamical systems with discontinuities, etc. The contents offer a smooth correspondence between science and engineering and will allow the reader to discover new ideas. Also emphasized is the unity of diverse branches of physics and mathematics towards understanding complex piecewise-smooth dynamical systems. Mathematical models presented will be important in numerical experiments, experimental measurements, and optimization problems found in applied mechanics.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transient Processes in Tribology written by A A Lubrecht and published by Elsevier. This book was released on 2004-06-04 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers contained within this volume focus on the transient aspects of the preocesses in tribology highlighting the differences obtained with stationery conditions, be they experimental analytical or numerical.

Download or read book Handbook of Structural Life Assessment written by Raouf A. Ibrahim and published by John Wiley & Sons. This book was released on 2017-03-29 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important, self-contained reference deals with structural life assessment (SLA) and structural health monitoring (SHM) in a combined form. SLA periodically evaluates the state and condition of a structural system and provides recommendations for possible maintenance actions or the end of structural service life. It is a diversified field and relies on the theories of fracture mechanics, fatigue damage process, and reliability theory. For common structures, their life assessment is not only governed by the theory of fracture mechanics and fatigue damage process, but by other factors such as corrosion, grounding, and sudden collision. On the other hand, SHM deals with the detection, prediction, and location of crack development online. Both SLA and SHM are combined in a unified and coherent treatment.

Download or read book Virtual Nonlinear Multibody Systems written by Werner Schiehlen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an edited versIOn of lectures presented at the NATO ADVANCED STUDY INSTITUTE on VIRTUAL NONLINEAR MUL TIBODY SYSTEMS which was held in Prague, Czech Republic, from 23 June to 3 July 2002. It was organized by the Department of Mechanics, Faculty of Mechanical Engineering, Czech Technical University in Prague, in cooperation with the Institute B of Mechanics, University of Stuttgart, Germany. The ADVANCED STUDY INSTITUTE addressed the state of the art in multibody dynamics placing special emphasis on nonlinear systems, virtual reality, and control design as required in mechatronics and its corresponding applications. Eighty-six participants from twenty-two countries representing academia, industry, government and research institutions attended the meeting. The high qualification of the participants contributed greatly to the success of the ADVANCED STUDY INSTITUTE in that it promoted the exchange of experience between leading scientists and young scholars, and encouraged discussions to generate new ideas and to define directions of research and future developments. The full program of the ADVANCED STUDY INSTITUTE included also contributed presentations made by participants where different topics were explored, among them: Such topics include: nonholonomic systems; flexible multibody systems; contact, impact and collision; numerical methods of differential-algebraical equations; simulation approaches; virtual modelling; mechatronic design; control; biomechanics; space structures and vehicle dynamics. These presentations have been reviewed and a selection will be published in this volume, and in special issues of the journals Multibody System Dynamics and Mechanics of Structures and Machines.

Download or read book Control of Machines with Friction written by Brian Armstrong-Hélouvry and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is my ambition in writing this book to bring tribology to the study of control of machines with friction. Tribology, from the greek for study of rubbing, is the discipline that concerns itself with friction, wear and lubrication. Tribology spans a great range of disciplines, from surface physics to lubrication chemistry and engineering, and comprises investigators in diverse specialities. The English language tribology literature now grows at a rate of some 700 articles per year. But for all of this activity, in the three years that I have been concerned with the control of machines with friction, I have but once met a fellow controls engineer who was aware that the field existed, this including many who were concerned with friction. In this vein I must confess that, before undertaking these investigations, I too was unaware that an active discipline of friction existed. The experience stands out as a mark of the specialization of our time. Within tribology, experimental and theoretical understanding of friction in lubricated machines is well developed. The controls engineer's interest is in dynamics, which is not the central interest of the tribologist. The tribologist is more often concerned with wear, with respect to which there has been enormous progress - witness the many mechanisms which we buy today that are lubricated once only, and that at the factory. Though a secondary interest, frictional dynamics are note forgotten by tribology.

Download or read book Transient Effects in Friction written by Andreas Goedecke and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transient friction effects determine the behavior of a wide class of mechatronic systems. Classic examples are squealing brakes, stiction in robotic arms, or stick-slip in linear drives. To properly design and understand mechatronic systems of this type, good quantitative models of transient friction effects are of primary interest. The theory developed in this book approaches this problem bottom-up, by deriving the behavior of macroscopic friction surfaces from the microscopic surface physics. The model is based on two assumptions: First, rough surfaces are inherently fractal, exhibiting roughness on a wide range of scales. Second, transient friction effects are caused by creep enlargement of the real area of contact between two bodies. This work demonstrates the results of extensive Finite Element analyses of the creep behavior of surface asperities, and proposes a generalized multi-scale area iteration for calculating the time-dependent real contact between two bodies. The toolset is then demonstrated both for the reproduction of a variety of experimental results on transient friction as well as for system simulations of two example systems.

Download or read book Proceedings of the 2nd International Conference on Mechanical System Dynamics written by Xiaoting Rui and published by Springer Nature. This book was released on with total page 4383 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings in Print written by and published by . This book was released on 1997 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An optimal Modal Reduction of Systems with Frictional Excitation written by Ramana Venkata Kappagantu and published by . This book was released on 1997 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Dynamic Systems Computational Techniques and Optimization written by Cornelius T. Leondes and published by Routledge. This book was released on 2021-09-01 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The finite element, an approximation method for solving differential equations of mathematical physics, is a highly effective technique in the analysis and design, or synthesis, of structural dynamic systems. Starting from the system differential equations and its boundary conditions, what is referred to as a weak form of the problem (elaborated in the text) is developed in a variational sense. This variational statement is used to define elemental properties that may be written as matrices and vectors as well as to identify primary and secondary boundaries and all possible boundary conditions. Specific equilibrium problems are also solved. This book clearly reveals the effectiveness and great significance of the finite element method available and the essential role it will play in the future as further development occurs.

Download or read book Nonsmooth Mechanics written by Bernard Brogliato and published by Springer. This book was released on 2016-02-29 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, this standard reference is a comprehensive treatment of nonsmooth mechanical systems refocused to give more prominence to issues connected with control and modelling. It covers Lagrangian and Newton–Euler systems, detailing mathematical tools such as convex analysis and complementarity theory. The ways in which nonsmooth mechanics influence and are influenced by well-posedness analysis, numerical analysis and simulation, modelling and control are explained. Contact/impact laws, stability theory and trajectory-tracking control are given detailed exposition connected by a mathematical framework formed from complementarity systems and measure-differential inclusions. Links are established with electrical circuits with set-valued nonsmooth elements as well as with other nonsmooth dynamical systems like impulsive and piecewise linear systems. Nonsmooth Mechanics (third edition) retains the topical structure familiar from its predecessors but has been substantially rewritten, edited and updated to account for the significant body of results that have emerged in the twenty-first century—including developments in: the existence and uniqueness of solutions; impact models; extension of the Lagrange–Dirichlet theorem and trajectory tracking; and well-posedness of contact complementarity problems with and without friction. Many figures (both new and redrawn to improve the clarity of the presentation) and examples are used to illustrate the theoretical developments. Material introducing the mathematics of nonsmooth mechanics has been improved to reflect the broad range of applications interest that has developed since publication of the second edition. The detail of some mathematical essentials is provided in four appendices. With its improved bibliography of over 1,300 references and wide-ranging coverage, Nonsmooth Mechanics (third edition) is sure to be an invaluable resource for researchers and postgraduates studying the control of mechanical systems, robotics, granular matter and relevant fields of applied mathematics. “The book’s two best features, in my view are its detailed survey of the literature... and its detailed presentation of many examples illustrating both the techniques and their limitations... For readers interested in the field, this book will serve as an excellent introductory survey.” Andrew Lewis in Automatica “It is written with clarity, contains the latest research results in the area of impact problems for rigid bodies and is recommended for both applied mathematicians and engineers.” Panagiotis D. Panagiotopoulos in Mathematical Reviews “The presentation is excellent in combining rigorous mathematics with a great number of examples... allowing the reader to understand the basic concepts.” Hans Troger in Mathematical Abstracts “/i>

Download or read book The Mechanics of Jointed Structures written by Matthew R.W. Brake and published by Springer. This book was released on 2017-07-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the challenges inherent in jointed structures and guides researchers to the still-open, pressing challenges that need to be solved to advance this critical field. The authors cover multiple facets of interfacial mechanics that pertain to jointed structures: tribological modeling and measurements of the interface surfaces, constitutive modeling of joints, numerical reduction techniques for structures with joints, and uncertainty quantification and propagation for these structures. Thus, the key subspecialties addressed are model reduction for nonlinear systems, uncertainty quantification, constitutive modeling of joints, and measurements of interfacial mechanics properties (including tribology). The diverse contributions to this volume fill a much needed void in the literature and present to a new generation of joints researchers the potential challenges that they can engage in in order to advance the state of the art. Clearly defines internationally recognized challenges in joint mechanics/jointed structures and provides a comprehensive assessment of the state-of-the-art for joint modeling; Identifies open research questions facing joint mechanics; Details methodologies for accounting for uncertainties (due both to missing physics and variability) in joints; Explains and illustrates best-practices for measuring joints’ properties experimentally; Maximizes reader understanding of modeling joint dynamics with a comparison of multiple approaches.