Download or read book Elasticity and Plasticity of Large Deformations written by Albrecht Bertram and published by Springer Nature. This book was released on 2021-04-07 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an introduction to material theory and, in particular, to elasticity, plasticity and viscoelasticity, to bring the reader close to the frontiers of today’s knowledge in these particular fields. It starts right from the beginning without assuming much knowledge of the subject. Hence, the book is generally comprehensible to all engineers, physicists, mathematicians, and others. At the beginning of each new section, a brief Comment on the Literature contains recommendations for further reading. This book includes an updated reference list and over 100 changes throughout the book. It contains the latest knowledge on the subject. Two new chapters have been added in this new edition. Now finite viscoelasticity is included, and an Essay on gradient materials, which have recently drawn much attention.

Download or read book THEORY OF ELASTICITY AND PLASTICITY written by H. JANE HELENA and published by PHI Learning Pvt. Ltd.. This book was released on 2017-07-01 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of Elasticity and Plasticity is designed as a textbook for both undergraduate and postgraduate students of engineering in civil, mechanical and aeronautical disciplines. This book has been written with the objective of bringing the concepts of elasticity and plasticity to the students in a simplified and comprehensive manner. The basic concepts, definitions, theory as well as practical applications are discussed in a clear, logical and concise manner for better understanding. Starting with, general relationships between stress, strain and deformations, the book deals with specific problems on plane stress, plane strain and torsion in non-circular sections. Advanced topics such as membrane analogy, beams on elastic foundations and plastic analysis of pressure vessels are also discussed elaborately. For better comprehension, the text is well supported with:  Large number of worked-out examples in each chapter.  Well-labelled illustrations.  Numerous Review Questions that reinforce the understanding of the subject. As all the concepts are covered extensively with a blend of theory and practice, this book will be a useful resource to the students.

Download or read book Theory of Elasticity and Plasticity written by Valentin Molotnikov and published by Springer Nature. This book was released on 2021-04-12 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a core text for university curricula in solid body mechanics and, at the same time, examines the main achievements of state of the art research in the mechanics of elastic and non-elastic materials. This latter goal of the book is achieved through rich bibliographic references, many from the authors’ own work. authors. Distinct from similar texts, there are no claims in this volume to a single universal theory of plasticity. However, solutions are given to some new problems and to the construction of models useful both in pedagogic terms for students and practical terms for professional design engineers. Examples include the authors’ decisions about the Brazilian test, stability of rock exposure, and pile foundations. Designed for both upper-level university students and specialists in the mechanics of deformable hard body, the material in this book serves as a source for numerous topics of course and diploma concentration.

Download or read book Elasticity and Plasticity written by J. N. Goodier and published by Courier Dover Publications. This book was released on 2016-03-17 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises two classic essays on the mathematical theories of elasticity and plasticity by authorities in this area of engineering science. Undergraduate and graduate students in engineering as well as professional engineers will find these works excellent texts and references. The Mathematical Theory of Elasticity covers plane stress and plane strain in the isotropic medium, holes and fillets of assignable shapes, approximate conformal mapping, reinforcement of holes, mixed boundary value problems, the third fundamental problem in two dimensions, eigensolutions for plane and axisymmetric states, anisotropic elasticity, thermal stress, elastic waves induced by thermal shock, three-dimensional contact problems, wave propagation, traveling loads and sources of disturbance, diffraction, and pulse propagation. The Mathematical Theory of Plasticity explores the theory of perfectly plastic solids, the theory of strain-hardening plastic solids, piecewise linear plasticity, minimum principles of plasticity, bending of a circular plate, and other problems.

Download or read book Computational Methods in Elasticity and Plasticity written by A. Anandarajah and published by Springer Science & Business Media. This book was released on 2011-01-04 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Methods in Elasticity and Plasticity: Solids and Porous Media presents the latest developments in the area of elastic and elasto-plastic finite element modeling of solids, porous media and pressure-dependent materials and structures. The book covers the following topics in depth: the mathematical foundations of solid mechanics, the finite element method for solids and porous media, the theory of plasticity and the finite element implementation of elasto-plastic constitutive models. The book also includes: -A detailed coverage of elasticity for isotropic and anisotropic solids. -A detailed treatment of nonlinear iterative methods that could be used for nonlinear elastic and elasto-plastic analyses. -A detailed treatment of a kinematic hardening von Mises model that could be used to simulate cyclic behavior of solids. -Discussion of recent advances in the analysis of porous media and pressure-dependent materials in more detail than other books currently available. Computational Methods in Elasticity and Plasticity: Solids and Porous Media also contains problem sets, worked examples and a solutions manual for instructors.

Download or read book Elasticity and Plasticity of Large Deformations written by Albrecht Bertram and published by Springer Science & Business Media. This book was released on 2011-10-07 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Continuum Mechanics is a rapidly growing field of research. Since the last edition of this book, many important results in this field have been published. This new edition refers to the most important results. The part on hyperelastic models and anisotropic yield criteria has been enlarged and an outlook on Material Plasticity has been added.

Download or read book Applied Elasticity and Plasticity written by Mumtaz Kassir and published by CRC Press. This book was released on 2017-10-12 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Elasticity and Plasticity is a comprehensive work that introduces graduate students and professionals in civil, mechanical, aeronautical and metallurgical engineering to the basic theories of elasticity, plasticity and their practical applications. Based on experimental data of static tension tests of material, several elastic and plastic stress-strain relations are derived, and commonly-used yield criteria and strain hardening rules are discussed as well. Analysis of conventional, deviatoric and mathematical stress and strain in two and three dimensions is presented. Analytical applications include torsion and bending of structural components subjected to various loadings, thick-walled cylindrical and spherical vessels subjected to internal and external pressures, stress-concentrations around holes, stress-intensity factors in structural components containing circular, elliptical and many more concepts important for professionals and students alike.

Download or read book Elasticity and Plasticity of Large Deformations written by Albrecht Bertram and published by Springer Science & Business Media. This book was released on 2008-08-03 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This careful and detailed introduction to non-linear continuum mechanics and to elasticity and platicity, with a unique mathematical foundation, starts right from the basics. The general theory of mechanical behaviour is particularized for the broad and important classes of elasticity and plasticity. Brings the reader to the forefront of today's knowledge. A list of notations and an index help the reader finding specific topics.

Download or read book Nonlinear Continuum Mechanics for Finite Elasticity Plasticity written by Koichi Hashiguchi and published by Elsevier. This book was released on 2020-06-19 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Continuum Mechanics for Finite Elasticity-Plasticity empowers readers to fully understand the constitutive equation of finite strain, an essential piece in assessing the deformation/strength of materials and safety of structures. The book starts by providing a foundational overview of continuum mechanics, elasticity and plasticity, then segues into more sophisticated topics such as multiplicative decomposition of deformation gradient tensor with the isoclinic concept and the underlying subloading surface concept. The subloading surface concept insists that the plastic strain rate is not induced suddenly at the moment when the stress reaches the yield surface but it develops continuously as the stress approaches the yield surface, which is crucially important for the precise description of cyclic loading behavior. Then, the exact formulations of the elastoplastic and viscoplastic constitutive equations based on the multiplicative decomposition are expounded in great detail. The book concludes with examples of these concepts and modeling techniques being deployed in real-world applications. Table of Contents: 1. Mathematical Basics 2. General (Curvilinear) Coordinate System 3. Description of Deformation/Rotation in Convected Coordinate System 4. Deformation/Rotation (Rate) Tensors 5. Conservation Laws and Stress Tensors 6. Hyperelastic Equations 7. Development of Elastoplastic Constitutive Equations 8. Multiplicative Decomposition of Deformation Gradient Tensor 9. Multiplicative Hyperelastic-based Plastic and Viscoplastic Constitutive Equations 10. Friction Model: Finite Sliding Theory Covers both the fundamentals of continuum mechanics and elastoplasticity while also introducing readers to more advanced topics such as the subloading surface model and the multiplicative decomposition among others Approaches finite elastoplasticity and viscoplasticty theory based on multiplicative decomposition and the subloading surface model Provides a thorough introduction to the general tensor formulation details for the embedded curvilinear coordinate system and the multiplicative decomposition of the deformation gradient

Download or read book Foundations of the Theory of Elasticity Plasticity and Viscoelasticity written by Eduard Starovoitov and published by CRC Press. This book was released on 2012-07-18 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foundations of the Theory of Elasticity, Plasticity, and Viscoelasticity details fundamental and practical skills and approaches for carrying out research in the field of modern problems in the mechanics of deformed solids, which involves the theories of elasticity, plasticity, and viscoelasticity. The book includes all modern methods of research as well as the results of the authors’ recent work and is presented with sufficient mathematical strictness and proof. The first six chapters are devoted to the foundations of the theory of elasticity. Theory of stress-strain state, physical relations and problem statements, variation principles, contact and 2D problems, and the theory of plates are presented, and the theories are accompanied by examples of solving typical problems. The last six chapters will be useful to postgraduates and scientists engaged in nonlinear mechanics of deformed inhomogeneous bodies. The foundations of the modern theory of plasticity (general, small elastoplastic deformations and the theory of flow), linear, and nonlinear viscoelasticity are set forth. Corresponding research of three-layered circular plates of various materials is included to illustrate methods of problem solving. Analytical solutions and numerical results for elastic, elastoplastic, lineaer viscoelastic and viscoelastoplastic plates are also given. Thermoviscoelastoplastic characteristics of certain materials needed for numerical account are presented in the eleventh chapter. The informative book is intended for scientists, postgraduates and higher-level students of engineering spheres and will provide important practical skills and approaches.

Download or read book Variational Methods in Elasticity and Plasticity written by Kyūichirō Washizu and published by Pergamon. This book was released on 1974 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Elasticity and Plasticity written by J. N. Goodier and published by Courier Dover Publications. This book was released on 2016-04-21 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising two classic essays by experts on the mathematical theories of elasticity and plasticity, this volume is noteworthy for its contributions by Russian authors and others previously unrecognized in Western literature. 1958 edition.

Download or read book Continuum Mechanics written by Ellis H. Dill and published by CRC Press. This book was released on 2006-11-10 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on continuum mechanics focus on elasticity and fluid mechanics. But whether student or practicing professional, modern engineers need a more thorough treatment to understand the behavior of the complex materials and systems in use today. Continuum Mechanics: Elasticity, Plasticity, Viscoelasticity offers a complete tour of the subject th

Download or read book Theory of Elasticity and Plasticity written by Harold Malcolm Westergaard and published by . This book was released on 1952 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theory of Plasticity written by Jagabanduhu Chakrabarty and published by Elsevier. This book was released on 2012-12-02 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity is concerned with the mechanics of materials deformed beyond their elastic limit. A strong knowledge of plasticity is essential for engineers dealing with a wide range of engineering problems, such as those encountered in the forming of metals, the design of pressure vessels, the mechanics of impact, civil and structural engineering, as well as the understanding of fatigue and the economical design of structures. Theory of Plasticity is the most comprehensive reference on the subject as well as the most up to date -- no other significant Plasticity reference has been published recently, making this of great interest to academics and professionals. This new edition presents extensive new material on the use of computational methods, plus coverage of important developments in cyclic plasticity and soil plasticity. A complete plasticity reference for graduate students, researchers and practicing engineers; no other book offers such an up to date or comprehensive reference on this key continuum mechanics subject Updates with new material on computational analysis and applications, new end of chapter exercises Plasticity is a key subject in all mechanical engineering disciplines, as well as in manufacturing engineering and civil engineering. Chakrabarty is one of the subject's leading figures.

Download or read book Basic Engineering Plasticity written by David Rees and published by Elsevier. This book was released on 2012-12-02 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity is concerned with understanding the behavior of metals and alloys when loaded beyond the elastic limit, whether as a result of being shaped or as they are employed for load bearing structures. Basic Engineering Plasticity delivers a comprehensive and accessible introduction to the theories of plasticity. It draws upon numerical techniques and theoretical developments to support detailed examples of the application of plasticity theory. This blend of topics and supporting textbook features ensure that this introduction to the science of plasticity will be valuable for a wide range of mechanical and manufacturing engineering students and professionals. Brings together the elements of the mechanics of plasticity most pertinent to engineers, at both the micro- and macro-levels Covers the theory and application of topics such as Limit Analysis, Slip Line Field theory, Crystal Plasticity, Sheet and Bulk Metal Forming, as well as the use of Finite Element Analysis Clear and well-organized with extensive worked engineering application examples, and end of chapter exercises

Download or read book Plasticity Theory written by Jacob Lubliner and published by Courier Corporation. This book was released on 2013-04-22 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and geotechnical engineers, metallurgists and others. The necessary mathematics and basic mechanics and thermodynamics are covered in an introductory chapter, making the book a self-contained text suitable for advanced undergraduates and graduate students, as well as a reference for practitioners of solid mechanics.