Download or read book Introduction to Frustrated Magnetism written by Claudine Lacroix and published by Springer Science & Business Media. This book was released on 2011-01-12 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of highly frustrated magnetism has developed considerably and expanded over the last 15 years. Issuing from canonical geometric frustration of interactions, it now extends over other aspects with many degrees of freedom such as magneto-elastic couplings, orbital degrees of freedom, dilution effects, and electron doping. Its is thus shown here that the concept of frustration impacts on many other fields in physics than magnetism. This book represents a state-of-the-art review aimed at a broad audience with tutorial chapters and more topical ones, encompassing solid-state chemistry, experimental and theoretical physics.
Download or read book Photoelectron Spectroscopy written by Shigemasa Suga and published by Springer. This book was released on 2013-09-07 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectron spectroscopy is now becoming more and more required to investigate electronic structures of various solid materials in the bulk, on surfaces as well as at buried interfaces. The energy resolution was much improved in the last decade down to 1 meV in the low photon energy region. Now this technique is available from a few eV up to 10 keV by use of lasers, electron cyclotron resonance lamps in addition to synchrotron radiation and X-ray tubes. High resolution angle resolved photoelectron spectroscopy (ARPES) is now widely applied to band mapping of materials. It attracts a wide attention from both fundamental science and material engineering. Studies of the dynamics of excited states are feasible by time of flight spectroscopy with fully utilizing the pulse structures of synchrotron radiation as well as lasers including the free electron lasers (FEL). Spin resolved studies also made dramatic progress by using higher efficiency spin detectors and two dimensional spin detectors. Polarization dependent measurements in the whole photon energy spectrum of the spectra provide useful information on the symmetry of orbitals. The book deals with the fundamental concepts and approaches for the application of this technique to materials studies. Complementary techniques such as inverse photoemission, photoelectron diffraction, photon spectroscopy including infrared and X-ray and scanning tunneling spectroscopy are presented. This book provides not only a wide scope of photoelectron spectroscopy of solids but also extends our understanding of electronic structures beyond photoelectron spectroscopy.
Download or read book The New Superconducting Electronics written by Harold Weinstock and published by Springer Science & Business Media. This book was released on 1993 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides a review of recent advances in all aspects of superconducting electronics, both for the traditional (4 K) liquid helium based (LTS) materials and the more recent ceramic (HTS) materials that can operate at higher temperatures in the range of liquid nitrogen (77 K).
Download or read book Very High Resolution Photoelectron Spectroscopy written by Stephan Hüfner and published by Springer Science & Business Media. This book was released on 2007-02-09 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoemission spectroscopy is one of the most extensively used methods to study the electronic structure of atoms, molecules, and solids and their surfaces. This volume introduces and surveys the field at highest energy and momentum resolutions allowing for a new range of applications, in particular for studies of high temperature superconductors.
Download or read book Functional Oxides written by Duncan W. Bruce and published by John Wiley & Sons. This book was released on 2011-03-29 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functional oxides have a wide variety of applications in the electronic industry. The discovery of new metal oxides with interesting and useful properties continues to drive much research in chemistry, physics, and materials science. In Functional Oxides five topical areas have been selected to illustrate the importance of metal oxides in modern materials chemistry: Noncentrosymmetric Inorganic Oxide Materials Geometrically Frustrated Magnetic Materials Lithium Ion Conduction in Oxides Thermoelectric Oxides Transition Metal Oxides - Magnetoresistance and Half-Metallicity The contents highlight structural chemistry, magnetic and electronic properties, ionic conduction and other emerging areas of importance, such as thermoelectricity and spintronics. Functional Oxides covers these complex concepts in a clear and accessible manner providing an excellent introduction to this broad subject area.
Download or read book An Introduction to Synchrotron Radiation written by Philip Willmott, PhD and published by John Wiley & Sons. This book was released on 2011-06-15 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader to the basic concepts of the generation and manipulation of synchrotron light, its interaction with matter, and the application of synchrotron light in the “classical” techniques, while including some of the most modern technological developments. As much as possible, complicated mathematical derivations and formulas are avoided. A more heuristic approach is adopted, whereby the general physical reasoning behind the equations is highlighted. Key features: A general introduction to synchrotron radiation and experimental techniques using synchrotron radiation Contains many detailed “worked examples” from the literature Of interest for a broad audience - synchrotrons are possibly one of the best examples of multidisciplinary research Four-colour presentation throughout
Download or read book Quantum Magnetism written by Ulrich Schollwöck and published by Springer. This book was released on 2008-05-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closing a gap in the literature, this volume is intended both as an introductory text at postgraduate level and as a modern, comprehensive reference for researchers in the field. Provides a full working description of the main fundamental tools in the theorists toolbox which have proven themselves on the field of quantum magnetism in recent years. Concludes by focusing on the most important cuurent materials form an experimental viewpoint, thus linking back to the initial theoretical concepts.
Download or read book Modeling and Simulation Techniques in Structural Engineering written by Samui, Pijush and published by IGI Global. This book was released on 2016-08-12 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new and effective analytical and numerical models is essential to understanding the performance of a variety of structures. As computational methods continue to advance, so too do their applications in structural performance modeling and analysis. Modeling and Simulation Techniques in Structural Engineering presents emerging research on computational techniques and applications within the field of structural engineering. This timely publication features practical applications as well as new research insights and is ideally designed for use by engineers, IT professionals, researchers, and graduate-level students.
Download or read book Quantum Physics in One Dimension written by Thierry Giamarchi and published by Oxford University Press. This book was released on 2004 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents in a pedagogical yet complete way correlated systems in one dimension. After an introduction to the basic concepts of correlated systems, it gives a step-by-step description of the techniques needed to treat one dimension, and discusses the resulting physics.
Download or read book The Chemistry Of Inkjet Inks written by Shlomo Magdassi and published by World Scientific. This book was released on 2009-07-31 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern printing is based on digitizing information and then representing it on a substrate, such as paper, pixel by pixel. One of the most common methods of digital printing is through inkjet printers. The process of inkjet printing is very complicated, and the ink used must meet certain chemical and physicochemical requirements including those related to storage stability; jetting performance; color management; wetting; and adhesion on substrates. Obviously, these requirements — which represent different scientific disciplines such as colloid chemistry, chemical engineering, and physics — indicate the need for an interdisciplinary book that will cover all aspects of making and utilizing inkjet inks.This book provides basic and essential information on the important parameters which determine ink performance. It covers not only the conventional use of inkjet technology on graphic applications, but also the extension of this method to print various functional materials, such as the use of conductive inks to print light-emitting diodes (LEDs) and three-dimensional structures. Thus, the book will serve a large community: industrial chemists who deal with ink formulations and synthesis of chemicals for inks; chemical engineers and physicists who deal with the rheological and flow properties of inks; and researchers in academic institutes who seek to develop novel applications based on inkjet printing of new materials.
Download or read book WIEN97 written by Peter Blaha and published by . This book was released on 1999 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structures on Different Time Scales written by Theo Woike and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-03-05 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 of this work presents theory and methods to study the structure of condensed matter on different time scales. The authors cover the structure analysis by X-ray diffraction methods from crystalline to amorphous materials, from static-relaxed averaged structures to short-lived electronically excited structures, including detailed descriptions of the time-resolved experimental methods. Complementary, an overview of the theoretical description of condensed matter by static and time-dependent density functional theory is given, starting from the fundamental quantities that can be obtained by these methods through to the recent challenges in the description of time dependent phenomena such as optical excitations. Contents Static structural analysis of condensed matter: from single-crystal to amorphous DFT calculations of solids in the ground state TDDFT, excitations, and spectroscopy Time-resolved structural analysis: probing condensed matter in motion Ultrafast science
Download or read book Valence Instabilities and Related Narrow Band Phenomena written by R. Parks and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Those well-intending workers, especially theorists, who have viewed hungrily the mixed valence problem, but have not yet made the bold leap, might be comforted to learn that the Rochester conference left the virginal state of that problem essentially intact. That is not to say that the event was prosaic. Indeed, the conferees exhibited a level of effervescence appropriate to the freshness and challenge of the problem at hand. If the meeting failed to solve major questions, it at least established several guidelines. One is that future experimental efforts, at least on a short time scale, might be spent most profitably on those substances which exhibit consistent, and hence probably intrinsic, behavior from laboratory to laboratory. A recurring message, not always subtle, to the·theorists was that piecemeal approaches to the mixed valence problem, characteristic of much of the work to date, are of limited usefulness. For at the core of the problem one has a melange of boot-strapping interac tions which must be sorted out and dealt with properly. Para phrasing Phil Anderson (see Epilogue), the mixed valence problem is in the same category of problems which are failing to be done in field theory these days.
Download or read book Inelastic Scattering of X Rays with Very High Energy Resolution written by Eberhard Burkel and published by Springer. This book was released on 2006-04-11 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inelastic scattering of X-rays with very high energy resolution has finally become possible thanks to a new generation of high-intensity X-ray sources. This development marks the end to the traditional belief that low energy excitations like lattice vibrations cannot be resolved directly with X-rays: Inelastic scattering experiments allow to observe directly the small energy shifts of the photons. Studies of lattice vibrations, of excitations in molecular crystals, of collective excitations in liquids and electronic excitations in crystals demonstrating the broad applicability and power of this new technology are discussed in this book. The progress in this field opens up fantastic new research areas not only in physics but also in other disciplines such as materials science,biology and chemistry.
Download or read book Theory of Inelastic Scattering and Absorption of X rays written by Michel van Veenendaal and published by Cambridge University Press. This book was released on 2015-01-26 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-contained and comprehensive, this is the definitive guide to the theory behind X-ray spectroscopy.
Download or read book Electron Dynamics by Inelastic X Ray Scattering written by Winfried Schuelke and published by OUP Oxford. This book was released on 2007-06-21 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of the dynamics of many-electron systems is of fundamental importance to all disciplines of condensed matter physics. A very effective access to electron dynamics is offered by inelastic X-ray scattering (IXS) spectroscopy. The double differential scattering cross section for IXS is directly related to the time-dependent two-particle density correlation function, and, for large momentum and energy transfer (Compton limit) to the electron momentum distribution. Moreover, resonant inelastic X-ray scattering (RIXS) enables the study of electron dynamics via electronic excitations in a very selective manner (e.g. selectively spin, crystal momentum, or symmetry), so that other methods are efficaciously complemented. The progress of IXS spectroscopy is intimately related to the growing range of applications of synchrotron radiation. The aim of the book is to provide the growing community of researchers with accounts of experimental methods, instrumentation, and data analysis of IXS, with representative examples of successful applications, and with the theoretical framework for interpretations of the measurements.
Download or read book Research into Design for Communities Volume 2 written by Amaresh Chakrabarti and published by Springer. This book was released on 2017-04-13 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases cutting-edge research papers from the 6th International Conference on Research into Design (ICoRD 2017) – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design for communities. While design traditionally focused on the development of products for the individual, the emerging consensus on working towards a more sustainable world demands greater attention to designing for and with communities, so as to promote their sustenance and harmony - within each community and across communities. The special features of the book are the insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the largest collection of research from India. For practitioners and educators, it is exposure to an empirically validated suite of theories, models, methods and tools that can be taught and practiced for design-led innovation. The contents of this volume will be of use to researchers and professionals working in the areas on industrial design, manufacturing, consumer goods, and industrial management.
