Download or read book Effects of Thermo mechanical Loading from In situ Studies of EB PVD Thermal Barrier Coatings written by Melan N. Jansz and published by . This book was released on 2011 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thermo-mechanical effects on the strain evolution within an EB-PVD thermal barrier coating (TBC) is presented in this work using in-situ characterization. Synchrotron X-ray diffraction at sector 1-ID at the Argonne National Laboratory provided both qualitative and quantitative in-situ data on the strain evolution under a thermal cycle with mechanical loading. The results show that at a critical combination of temperature and load, the stress in the thermally grown oxide (TGO) layer in the TBC reaches a tensile region. These significant findings enhance existing literature showing purely compressive strains within the TGO where mechanical loads have been neglected. The results have important implications on the effects on the overall life of the coating. Depth resolved quantitative strain is presented as contour plots over a thermal cycle highlighting the complementary strains in the adjacent layers including the bond coat and the TBC with time and temperature. Systematic identification of the appropriate peaks within the multi-layer TBC system provides guidelines for future strain studies using high energy X-rays. Piezospectroscopic studies with applied mechanical loading are further presented as verification of the room temperature XRD data for future development of the method as an operational technique to be used outside the laboratory environment.
Download or read book Thermal Barrier Coatings Failure Theory and Evaluation Technology written by Yichun Zhou and published by Springer Nature. This book was released on 2022-10-08 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the failure theories and evaluation techniques of thermal barrier coatings, covering the thermal-mechanical–chemical coupling theories, performance and damage characterization techniques, and related evaluations. Thermal barrier coatings are the key thermal protection materials for high-temperature components in advanced aeroengines. Coating spallation is a major technical bottleneck faced by researchers. The extremely complex microstructure, diverse service environments, and failure behaviors bring challenges to the spallation analysis in terms of the selective use of mechanical theories, experimental methods, and testing platforms. In the book, the authors provide a systematic summary of the latest research and technological advances and present their insights and findings in the past couple of decades. This book is not only suitable for researchers and engineers in thermal barrier coatings and related fields but also a good reference for upper-undergraduate and postgraduate students of materials science and mechanics majors.
Download or read book Thermophysical and Thermomechanical Properties of Thermal Barrier Coating Systems written by and published by . This book was released on 2000 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Loadings in Thermal Barrier Coatings of Jet Engine Turbine Blades written by Tomasz Sadowski and published by Springer. This book was released on 2016-04-15 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses complex loadings of turbine blades and protective layer Thermal Barrier Coating (TBC), under real working airplane jet conditions. They obey both multi-axial mechanical loading and sudden temperature variation during starting and landing of the airplanes. In particular, two types of blades are analyzed: stationary and rotating, which are widely applied in turbine engines produced by airplane factories.
Download or read book Thermal Barrier Coatings written by and published by Elsevier. This book was released on 2011-01-14 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective coatings are essential to counteract the effects of corrosion and degradation of exposed materials in high-temperature environments such as gas turbine engines. Thermal barrier coatings reviews the latest advances in processing and performance of thermal barrier coatings, as well as their failure mechanisms. Part one reviews the materials and structures of thermal barrier coatings. Chapters cover both metallic and ceramic coating materials as well as nanostructured coatings. Part two covers established and advanced processing and spraying techniques, with chapters on the latest advances in plasma spraying and plasma vapour deposition as well as detonation gun spraying. Part three discusses the performance and failure of thermal barrier coatings, including oxidation and hot-corrosion, non-destructive evaluation and new materials, technologies and processes. With its distinguished editors and international team of contributors, Thermal barrier coatings is an essential reference for professional engineers in such industries as energy production, aerospace and chemical engineering as well as academic researchers in materials. Reviews the latest advances in processing and performance of thermal barrier coatings, as well as their failure mechanisms Explores the materials and structures of thermal barrier coatings incorporating cover both metallic and ceramic coating materials as well as nanostructured coating Assesses established and advanced processing and spraying techniques, including plasma vapour deposition and detonation gun spraying
Download or read book Failure of Thermal Barrier Coatings Under Thermal and Mechanical Fatigue Loading written by Brodin Håkan and published by . This book was released on 2004 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage and Failure Mechanisms of Thermal Barrier Coatings Under Thermomechanical Fatigue Loadings written by E. Tzimas and published by . This book was released on 2003 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical behavior of thermal barrier coated (TBC) systems under the influence of combined thermal and mechanical cyclic loading has been studied using a prototype experimental configuration that simulates realistically the operational conditions within a gas turbine. This study has demonstrated that the failure mechanisms of TBC systems under thermomechanical fatigue (TMF) conditions depend on the range of applied mechanical strain and on the phase angle between thermal and mechanical loading. The results highlight the importance of proper design of TMF experiments so that the failure mechanisms activated and studied during the experiments are the mechanisms responsible for the failure of TBC systems under service conditions.
Download or read book Thermophysical and Thermomechanical Properties of Thermal Barrier Coating Systemss written by Dongming Zhu and published by . This book was released on 2000 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Thermal Barrier Coatings written by Mohit Gupta and published by Springer. This book was released on 2015-05-05 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the relationships between microstructure, interface roughness, and properties of thermal barrier coatings. The author proposes a method for the reduction of the thermal conductivity of the ceramic layer in order to increase the lifetime of thermal barrier coatings. He includes models for the optimization of ceramic layer microstructure and interface roughness.
Download or read book Thermomechanical Behaviour of Plasma sprayed Thermal Barrier Coatings written by Joseph Andrew Thompson and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings. Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials. This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. Describes the latest developments in understanding high temperature corrosion Presents the latest research by the leading innovators from around the globe Case studies are provided to illustrate key points
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Ceramic Processing written by Adel Mohamed and published by . This book was released on 2015 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic oxides typically have a combination of properties that make them attractive for many applications compared with other materials. This book attempts to compile, unify, and present a recent development for the production techniques, such as electrochemical, foaming, and microwave sintering, of rare earth ceramic oxide materials. This book presents leading-edge research in this field from around the world. Although there is no formal partition of the book, the chapters cover several preparation methods for ceramic oxides, especially for coating and electrical applications. In addition, a fabrication foaming technique for porous ceramics with tailored microstructure along with distinctive properties is provided. The information provided in this book is very useful for a board of scientists and engineers from both academia and industry.
Download or read book Coatings and Thin Film Technologies written by Jaime Andres Perez Taborda and published by BoD – Books on Demand. This book was released on 2019-01-03 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of coatings and thin-film technologies is rapidly advancing to keep up with new uses for semiconductor, optical, tribological, thermoelectric, solar, security, and smart sensing applications, among others. In this sense, thin-film coatings and structures are increasingly sophisticated with more specific properties, new geometries, large areas, the use of heterogeneous materials and flexible and rigid coating substrates to produce thin-film structures with improved performance and properties in response to new challenges that the industry presents. This book aims to provide the reader with a complete overview of the current state of applications and developments in thin-film technology, discussing applications, health and safety in thin films, and presenting reviews and experimental results of recognized experts in the area of coatings and thin-film technologies.
