Download or read book Effects of Test Parameters on Tensile Mechanical Behavior of a Continuous Fibre Ceramic Composite CFCC written by John P. Piccola and published by . This book was released on 1994 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Sample Test Volume and Geometry on the Tensile Mechanical Behavior of SiC SiC Continuous Fiber Ceramic Composites Final Report written by and published by . This book was released on 1998 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of a silicon carbide-type fiber from an organometallic precursor has led to a major resurgence of interest in fiber-reinforced ceramic matrix composites. By combining this high strength fiber with a variety of ceramic matrices it has been possible to achieve tough composites offering significant potential advantages over monolithic ceramics and carbon-carbon for high temperature applications. A continuous-fiber ceramic matrix composite (CFCC) typical of materials proposed for such industrial applications as power generation, heat recovery and chemical production as well as biomedical and environmental applications was tested in uniaxial tension using a universal test machine. Test parameters investigated included: test mode (load versus displacement), test rate (0.003 mm/s, 0.03 mm/s, 50 N/s and 500 N/s), specimen geometry (straight-sided versus reduced-gauge section) and type of specimen volume (long/thin versus short/fat). Typical properties include an average elastic modulus 130 ± 10 Gpa, an average proportional limit stress of 45 ± 20 Mpa, an average ultimate tensile strength of 180 ± 20 MPa and an average modulus of toughness of 8.4 ± 2 (x105)J/m3.
Download or read book 25th Annual Conference on Composites Advanced Ceramics Materials and Structures A Volume 22 Issue 3 written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Fracture Mechanics of Ceramics written by R.C. Bradt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Second part of the proceedings of the Sixth International Symposium held in Karlsruhe, Germany, July 18-20, 1995.
Download or read book 23nd Annual Conference on Composites Advanced Ceramics Materials and Structures A Volume 20 Issue 3 written by Ersan Ustundag and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book Mechanical Thermal and Environmental Testing and Performance of Ceramic Composites and Components written by Stephen T. Gonczy and published by ASTM International. This book was released on 2000 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal and Mechanical Test Methods and Behavior of Continuous fiber Ceramic Composites written by Michael G. Jenkins and published by ASTM International. This book was released on 1997 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Sample Test Volume and Geometry on the Tensile Mechanical Behavior of SiC written by and published by . This book was released on 1998 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of a silicon carbide-type fiber from an organometallic precursor has led to a major resurgence of interest in fiber-reinforced ceramic matrix composites. By combining this high strength fiber with a variety of ceramic matrices it has been possible to achieve tough composites offering significant potential advantages over monolithic ceramics and carbon-carbon for high temperature applications. A continuous-fiber ceramic matrix composite (CFCC) typical of materials proposed for such industrial applications as power generation, heat recovery and chemical production as well as biomedical and environmental applications was tested in uniaxial tension using a universal test machine. Test parameters investigated included: test mode (load versus displacement), test rate (0.003 mm/s, 0.03 mm/s, 50 N/s and 500 N/s), specimen geometry (straight-sided versus reduced-gauge section) and type of specimen volume (long/thin versus short/fat). Typical properties include an average elastic modulus 130 " 10 Gpa, an average proportional limit stress of 45 " 20 Mpa, an average ultimate tensile strength of 180 " 20 MPa and an average modulus of toughness of 8.4 " 2 (x105)J/m3.
Download or read book Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2017-06-22 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global population growth and tremendous economic development has brought us to the crossroads of long-term sustainability and risk of irreversible changes in the ecosystem. Energy efficient and ecofriendly technologies and systems are critically needed for further growth and sustainable development. While ceramic matrix composites were originally developed to overcome problems associated with the brittle nature of monolithic ceramics, today the composites can be tailored for customized purposes and offer energy efficient and ecofriendly applications, including aerospace, ground transportation, and power generation systems. The 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 9) was held in Toronto, Canada, June 26-30, 2016 to discuss challenges and opportunities in manufacturing, commercialization, and applications for these important material systems. The Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016) was held in conjunction with HTCMC 9 to address key issues, challenges, and opportunities in a variety of advanced materials and technologies that are critically needed for sustainable societal development. This Ceramic Transactions volume contains a collection of peer reviewed papers from the 16 below symposia that were submitted from these two conferences Design and Development of Advanced Ceramic Fibers, Interfaces, and Interphases in Composites- A Symposium in Honor of Professor Roger Naslain Innovative Design, Advanced Processing, and Manufacturing Technologies Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) Polymer Derived Ceramics and Composites Advanced Thermal and Environmental Barrier Coatings: Processing, Properties, and Applications Thermomechanical Behavior and Performance of Composites Ceramic Integration and Additive Manufacturing Technologies Component Testing and Evaluation of Composites CMC Applications in Transportation and Industrial Systems Powder Processing Innovation and Technologies for Advanced Materials and Sustainable Development Novel, Green, and Strategic Processing and Manufacturing Technologies Ceramics for Sustainable Infrastructure: Geopolymers and Sustainable Composites Advanced Materials, Technologies, and Devices for Electro-optical and Medical Applications Porous Ceramics for Advanced Applications Through Innovative Processing Multifunctional Coatings for Sustainable Energy and Environmental Applications
Download or read book Paper written by and published by . This book was released on 1998 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME Technical Papers written by and published by . This book was released on 1998 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Matrix Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of information on various aspects of ceramic matrix composites (CMC). It covers ceramic and carbon fibers; the fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration and joining. Each chapter in the book is written by specialists and internationally renowned researchers in the field. This book will provide state-of-the-art information on different aspects of CMCs. The book will be directed to researchers working in industry, academia, and national laboratories with interest and professional competence on CMCs. The book will also be useful to senior year and graduate students pursuing degrees in ceramic science and engineering, materials science and engineering, aeronautical, mechanical, and civil or aerospace engineering. Presents recent advances, new approaches and discusses new issues in the field, such as foreign object damage, life predictions, multiscale modeling based on probabilistic approaches, etc. Caters to the increasing interest in the application of ceramic matrix composites (CMC) materials in areas as diverse as aerospace, transport, energy, nuclear, and environment. CMCs are considered ans enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, space structures, as well as nuclear and chemical industries. Offers detailed descriptions of ceramic and carbon fibers; fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration/joining.
Download or read book Multiple Laboratory Round Robin Study of the Flexural Shear and Tensile Behavior of a Two Dimensionally Woven NicalonTM SylramicTM Ceramic Matrix Composite written by LP. Zawada and published by . This book was released on 2000 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: A round-robin study was conducted on the flexural, shear, and tensile mechanical behavior of a NicalonTM fiber-reinforced SylramicTM matrix CFCC continuous fiber ceramic composite (CFCC) to: 1) determine the precision and bias of three ASTM test methods at room temperature for flexure, shear and tension [Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramics (C 1341), Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures (C 1292), and Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Ceramic Composites with Solid Rectangular Cross-Sections at Ambient Temperatures (C 1275)]; 2) establish an expansive data base (e.g., Mil-Hdbk-17 CMC effort) for a single CFCC; and 3) evaluate a statistically- significant sample size of a single CFCC for processing and design purposes. The commercial CFCC was comprised of eight plies of ceramic grade NicalonTM fiber fabric in a symmetric 0/90 lay-up, a proprietary boron-containing interphase, and a silicon nitrocarbide matrix (SylramicTM) derived from polysilazane. Ten each of flexure, in-plane tension, in-plane (Iosipescu) shear, and interlaminar (double notch compression) test specimens were tested by each of seven to ten different laboratories per the applicable ASTM test method for totals of sixty to one hundred replicate tests for each test type. With a few exceptions, coefficients of variation for repeatability and reproducibility ranged from 5 to 10%.
Download or read book 57th Porcelain Enamel Institute Technical Forum Volume 16 Issue 6 written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-09-28 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Download or read book High Temperature Mechanical Behaviour of Ceramic Composites written by Shanti Nair and published by Butterworth-Heinemann. This book was released on 1995-05-15 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction; Interfaces; Residual stresses; Fibre properties; Matrix cracking in unidirectional materials; Matrix cracking in 2-D materials; Stress redistribution; Fatigue, creep, challenges and opportunities.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook on Continuous Fiber Reinforced Ceramic Matrix Composites written by Center for Information and Numerical Data Analysis and Synthesis. West Lafayette, Ind.. and published by . This book was released on 1995 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is organized into fifteen chapters which comprehensively cover the topic of continuous fiber ceramic composites (CFCCs) from theoretical considerations through raw materials and processing to design, applications, and property topics. Perhaps processing science and technology appropriately receive the most emphasis in this handbook since the development of processing technologies has most significantly advanced CFCC material properties and applications. Topics such as chemical vapor infiltration, fiber/matrix interfaces, polymer pyrolysis, directed metal oxidation, and particulate infiltration are covered in a comprehensive manner. Theory of fiber reinforcement, mechanical and thermal properties, test methods, and design methodology are also covered in detail.
