Download or read book Effects of Surface Condition on the Mechanical Properties of Titanium and Its Alloys written by D.N. Williams and published by . This book was released on 1971 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Surface Conditions on the Mechanical Properties of Titanium and Its Alloys written by D. N. Williams and published by . This book was released on 1971 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Surface Condition on the Mechanical Properties of Titanium and Its Alloys written by D. N. Williams and published by . This book was released on 1971 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report reviews the available literature on the effects of commonly encountered surface conditions on the properties of titanium and its alloys. The material properties of major concern include fatigue strength, tensile strength and ductility, and bend ductility. (Author).
Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Current Industrial Reports written by United States. Bureau of the Census and published by . This book was released on 1973 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Current Industrial Reports written by and published by . This book was released on 1973-05 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.
Download or read book The Effect of Grain Size on the Mechanical Properties of Titanium and Its Alloys written by Frank Charles Holden and published by . This book was released on 1955 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot salt stress corrosion Cracking and Its Effect on Tensile and Stress rupture Properties of Ti 6Al 4V Titanium alloy Sheet written by Dick M. Royster and published by . This book was released on 1969 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Salt stress corrosion cracking effects on tensile and stress rupture properties of titanium alloy sheet.
Download or read book The Oxidation and Contamination of Titanium and Its Alloys written by J. M. Ferguson and published by . This book was released on 1968 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental programs concerned with the oxidation of titanium and its alloys are reviewed and results compared with those predicted by theory. Wagner-Hauffe theory is used as the primary basis for comparison, and its inconsistencies are pointed out. Fifteen binary alloy systems involving titanium are covered, as well as a few ternary and commercial alloys. A short section discusses the effects of oxygen or nitrogen contamination on the mechanical properties of titanium and its alloys. (Author).
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book The Effect of Grain Refinement of Titanium on Its Mechanical Performance and Cell Response written by Alexander Medvedev and published by . This book was released on 2015 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium and its alloys have long been in the focus of biomedical research as some of the most suitable materials for implant production. This fact is attributed to an excellent combination of mechanical, biological and physico-chemical properties, such as low density and high mechanical strength, resulting in the highest specific strength among most common implant materials, reduced elastic modulus (compared to stainless steel or CoCrMo alloys), excellent corrosion resistance, and enhanced biocompatibility.Recently, titanium alloy Ti6Al4V, the most common titanium implant material so far, was in the focus of several studies that claimed it has a potential to be toxic to humans due to the release of aluminium and vanadium ions in the surrounding tissues when placed within the host. This problem can be overcome by using titanium with lower alloying content, for example, commercially pure (CP) titanium, such as Grade 2 or Grade 4. Unfortunately, CP titanium shows significant decrease in mechanical properties compared to Ti6Al4V. There are ways, however, to enhance the strength of materials without altering their chemical composition. Particularly, severe plastic deformation (SPD) has been shown to dramatically enhance the strength of various materials while retaining good ductility.It is well known that the surface of medical implants plays a crucial role in the success and outcome of the surgery and determines the longevity of implants. Therefore, it is common to modify the surface of these devices in order to increase the surface area, alter its chemistry or wettability. There are numerous techniques available nowadays that allow modification of implant surface, however, only a handful of them were implemented in industry. One of such processes - SLA (Shot-blasted with Large grit and Acid etching) - is considered one of the most promising since it has been adopted by several different companies around the world. The main aim of the present work was to use SPD to increase the strength of CP titanium of two purity grades - Grade 2 and Grade 4 - in order to develop a material that, as a result of a combination of high strength and good biocompatibility, could be used to replace Ti6Al4V as a major titanium-based material on the market. Moreover, we performed all experiments on samples with two distinctly different types of surfaces - polished and SLA-treated - to highlight the effect of grain refinement on the outcome of subsequent surface modification. To the best of our knowledge, no work examining a combined effect of grain refinement and surface modification on mechanical and biological properties has been previously described in the literature. The results discussed in this thesis suggest that, as a result of a significant refinement of microstructure by SPD processing, mechanical properties of CP titanium can match (fatigue) or even exceed (tensile) those of Ti6Al4V. It was observed that SLA treatment results in the formation of a surface layer with refined structure which aided in enhancing fatigue properties of as-received titanium after surface modification. Although such layer was not found in case of SPD-processed samples, which led to a slight decrease of fatigue life compared to samples with polished surface, fatigue properties of SPD-processed titanium were still superior to those of Ti6Al4V. Fatigue testing in simulated body fluid, designed to test how titanium with refined structure reacts to aggressive environment, indicated no deterioration of fatigue life of titanium, regardless of microstructure.It has been demonstrated that surface properties of titanium were notably influenced by the grain size and the subsequent SLA treatment. Roughness of polished samples was shown to be a function of the grain size of material. At the same time, mechanical properties are believed to be responsible for differences in roughness of SLA-modified surface, as surface roughening primarily occurs by means of grit-blasting with its effect highly dependent on the strength/ductility of the surface. Wettability of titanium has been observed to be determined by the surface texture, being a product of variations in the processing route. This effect retained after severe surface roughening as well, although, overall, surface of SLA-treated titanium samples were found to be much more hydrophobic. Simultaneously, variations in wettability between samples of different conditions became less pronounced. Chemical analysis of CP Ti with varying microstructure and surface quality revealed no effect of microstructure on the chemical state of the polished surface. At the same time, it was noted that SLA treatment of ultrafine-grained titanium may favour the formation of a thicker, more chemically uniform oxide layer. Finally, an assessment of biological properties of CP Ti has been made. The results indicate a positive effect of ultrafine-grained structure and associated surface properties on the attachment, proliferation and differentiation of two types of tissue cells - human osteosarcoma SaOS-2 cells and adipose-derived mesenchymal stem cells (adMSC) on both types of surfaces. At the same time, bacterial adhesion was also significantly enhanced on the surface of SLA-treated titanium. This fact suggests that an utilisation of surface modification techniques in industrial processes of implant production should be most carefully controlled in order to reduce possibility of serious complication that may be caused by bacterial colonisation.Overall, experimental results presented in this thesis indicate that SPD, especially in combination with surface modification techniques, such as SLA treatment, has a great potential to improve both mechanical and biological properties of commercially pure titanium to make it a highly favourable and competitive candidate for the replacement of Ti6Al4V alloy. Our research suggests that there may be only one potential drawback of a combination of SPD and SLA, namely, enhanced adhesion of bacterial cells on the surface of such materials. However, this negative effect is not attributed to SPD processing, but rather to the increased surface roughness inherent to the SLA treatment. We suggest that this issue can be addressed by developing proper handling, storage and pre-implantation preparation protocols, a process that was not covered in current work but could be included as a part of the basis for the future work.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International(OH). This book was released on 2000 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Corrosion of Titanium written by J. D. Jackson and published by . This book was released on 1966 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ti Based Biomaterials written by Jarosław Jakubowicz and published by MDPI. This book was released on 2020-06-17 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, great attention has been paid to materials that can be used in the human body to prepare parts that replace failed bone structures. Of all materials, Ti-based materials are the most desirable, because they provide an optimum combination of mechanical, chemical, and biological properties. The successful application of Ti biomaterials has been confirmed mainly in dentistry, orthopedics, and traumatology. Titanium biocompatibility is practically the highest of all metallic biomaterials; however, new solutions are being sought to continuously improve their biocompatibility and osseointegration. Thus, the chemical modification of Ti results in the formation of new alloys or composites, which provide new perspectives for Ti biomaterials applications. This book covers broad aspects of Ti-based biomaterials concerning the design of their structure, mechanical, and biological properties. This book demonstrates that the new Ti-based compounds and their surface treatment provide the best properties for biomedical applications.
