Download or read book Advances in Deep Fat Frying of Foods written by Servet Gulum Sumnu and published by CRC Press. This book was released on 2008-12-17 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Battered fried foods consistently remain in high demand despite concerns about their health aspects, prompting food processors to develop new methods and alternative oils and batters in the name of healthy, tasty fried foods and high-performance, cost-effective frying oil. With contributions from an international panel of food technology authoritie

Download or read book The Science of Poultry and Meat Processing written by Shai Barbut and published by . This book was released on 2016-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ingredients in Meat Products written by Rodrigo Tarté and published by Springer Science & Business Media. This book was released on 2009-02-21 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is little doubt that today’s food industry is faced with a rapidly changing market landscape. The obvious need to continue to provide consumers with nutritious, delectable, safe, and affordable food products which are also profitable for food manufacturers, as well as the ongoing challenge of ensuring the delivery of adequate nutrition to hundreds of millions of disadvantaged people around the world, appears – at least as much as, if not more than, ever – to be at odds with the challenges posed by soaring energy and food commodity prices; fast-paced changes in consumer demographics, habits, and preferences; and the continual need to stay ahead of current and emerging food safety issues. In addition to this, the present ubiquity in the industry of terms such as functional foods, nutraceuticals, low sodium, low fat, clean label, minimal processing, and natural – to name a few – underscores yet a different dimension of the challenges faced by food processors today. On the other hand, however, the solutions of many of these challenges may, concurrently, present the food industry with unique and exciting opportunities. The processed meat industry, despite its long history and tradition, is certainly not exempt from having to face these modern challenges, nor excluded from realizing the promises of the opportunities that may lie ahead.

Download or read book Adhesion in Foods written by Amos Nussinovitch and published by John Wiley & Sons. This book was released on 2017-01-17 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: To the layman, adhesion is a simple matter of how well two different materials stick together, and adhesion measurements provide some indication of the force required to separate them. However, a more detailed look at adhesion shows that it is a very important feature of food throughout its manufacturing, packaging and storage. Chapters are fully devoted to the fascinating topic of adhesion in foods. Key features of the book include, but are not limited to: definition and nomenclature of adhesion; adhesion mechanisms and measurements; stickiness in various foods and its relation to technological processes; perception of stickiness; hydrocolloids as adhesive agents for foods; adhesion phenomena in coated, battered, breaded and fried foods; electrostatic adhesion in foods; multilayered adhered food products, and adhesion of substances to packaging and cookware. Adhesion in Foods: Fundamental Principles and Applications is dedicated not only to the academic community but also to the broader population of industrialists and experimentalists who will find it to be not only a source of knowledge, but also a launching pad for novel ideas and inventions. In particular, this book is expected to be of interest to personnel involved in food formulation, food scientists, food technologists, industrial chemists and engineers, and those working in product development.

Download or read book Batters and Breadings in Food Processing written by Karel Kulp and published by Academic Press. This book was released on 2016-07-08 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first major update of this topic in 21 years, editors Kulp, Loewe, Lorenz, and Gelroth have gathered an elite group of internationally recognized experts. This new edition examines the current market trends and applications for coated food products. It updates our knowledge of ingredient utilization in battered and breaded products using corn, wheat, rice, fats and oils, and flavorings and seasonings. It applies the functionality of these ingredients across the rheology of coating systems and into the selection of specific processing equipment Each chapter explores a different facet of developing batter-based coatings and breadings for a variety of new products, and explains how new technology has turned this profitable food category into a science. New authors have contributed chapters on heat and mass transfer in foods during deep-fat frying, nutritional aspects of coated foods, and food allergens. Batters and Breadings in Food Processing, Second Edition presents essential technical and scientific information in a peer-reviewed resource. It will be valuable reference for food technologists in Research and Development, Quality Assurance, Rheology, and Bakiing. It will make an excellent text for any course with a batters and breadings processing component.

Download or read book Batter and Breading written by Darrel R. Suderman and published by . This book was released on 1983 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Poultry Science and Technology Secondary Processing written by Isabel Guerrero-Legarreta and published by John Wiley and Sons. This book was released on 2010-03-30 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for the poultry industry—Volume 2 describes poultry processing from raw meat to final retail products With an unparalleled level of coverage, the Handbook of Poultry Science and Technology provides an up-to-date and comprehensive reference on poultry processing. Volume 2: Secondary Processing covers processing poultry from raw meat to uncooked, cooked or semi-cooked retail products. It includes the scientific, technical, and engineering principles of poultry processing, methods and product categories, product manufacturing and attributes, and sanitation and safety. Volume 2: Secondary Processing is divided into seven parts: Secondary processing of poultry products—an overview Methods in processing poultry products—includes emulsions and gelations; breading and battering; mechanical deboning; marination, cooking, and curing; and non-meat ingredients Product manufacturing—includes canned poultry meat, turkey bacon and sausage, breaded product (nuggets), paste product (pâté), poultry ham, luncheon meat, processed functional egg products, and special dietary products for the elderly, the ill, children, and infants Product quality and sensory attributes—includes texture and tenderness, protein and poultry meat quality, flavors, color, handling refrigerated poultry, and more Engineering principles, operations, and equipment—includes processing equipment, thermal processing, packaging, and more Contaminants, pathogens, analysis, and quality assurance—includes microbial ecology and spoilage in poultry and poultry products; campylobacter; microbiology of ready-to-eat poultry products; and chemical and microbial analysis Safety systems in the United States—includes U.S. sanitation requirements, HACCP, U.S. enforcement tools and mechanisms

Download or read book Poultry Meat Processing written by Casey M. Owens and published by CRC Press. This book was released on 2000-12-26 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the first edition of Poultry Meat Processing was published, it provided a complete presentation of the theoretical and practical aspects of poultry meat processing, exploring the complex mix of biology, chemistry, engineering, marketing, and economics involved. Upholding its reputation as the most comprehensive text available, Poultry Meat Pro

Download or read book Poultry Meat Processing and Quality written by G Mead and published by Elsevier. This book was released on 2004-06-01 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poultry products are universally popular and in recent years the consumption of poultry meat has risen dramatically. To ensure the continued growth and competitiveness of this industry, it is essential that poultry meat quality and safety are maintained during production and processing. This important collection provides an authoritative review of the key issues affecting poultry meat quality in production and processing.The book begins by establishing consumer requirements for meat quality, before examining the influence of breeding and husbandry, and techniques for stunning and slaughter of poultry. Chapters 5 and 6 look at primary and secondary processing and Chapters 7, 8 and 9 discuss packaging, refrigeration and other preservation techniques. There are also chapters on microbial hazards and chemical residues in poultry. Quality management issues are reviewed in the final group of chapters, including shelf-life and spoilage, measuring quality parameters and ways of maintaining safety and maximising quality.Poultry meat processing and quality is an essential reference book for technical managers in the Poultry Industry and anyone engaged in teaching or research on poultry meat production. - An essential reference for the entire poultry meat industry - Reviews the key issues affecting poultry meat quality in production and processing - Extensive analysis of poultry meat safety issues

Download or read book Muscle Foods written by Burdette C. Breidenstein and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, in the food industry, there has been a distinction made among meat, poultry, seafood, and game. Meat has historically been defined as the edible flesh of animals. This basically referred only to the red meats, namely, beef, lamb, pork, and veal, including both fresh and processed products as well as variety or glandular meats. It has been recognized more recently that all foods derived from muscle, or muscle foods, have basically the same or similar characteristics in physical and chemical properties. Tberefore, it is logical to exarnine and consider all muscle foods under one cover. Tbis book, therefore, is an attempt to address the various attributes of red meat, poultry, fish, and game under the single heading of muscle foods and to note any differences where they might OCCUT. It is of interest that of the 10 top V. S. meat companies in 1990, 8 of them were dealing with poultry as well as red meats and that 4 of the 10 were also involved with seafoods. Tbis lends impetus to the inclusion of all three in a book such as this. Furthermore, the rapid increase in consumption of poultry meat to approximately 30 kg (65 pounds) per capita and seafoods to 7 kg (16 pounds) per capita compared to beef at 34 kg (75 pounds) and pork at 30 kg (65 pounds), whereas veal and lamb/mutton represent only 0.

Download or read book Food Processing Technology written by P.J. Fellows and published by Elsevier. This book was released on 2009-06-22 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Food processing technology was quickly adopted as the standard text by many food science and technology courses. This completely revised and updated third edition consolidates the position of this textbook as the best single-volume introduction to food manufacturing technologies available. This edition has been updated and extended to include the many developments that have taken place since the second edition was published. In particular, advances in microprocessor control of equipment, 'minimal' processing technologies, functional foods, developments in 'active' or 'intelligent' packaging, and storage and distribution logistics are described. Technologies that relate to cost savings, environmental improvement or enhanced product quality are highlighted. Additionally, sections in each chapter on the impact of processing on food-borne micro-organisms are included for the first time. - Introduces a range of processing techniques that are used in food manufacturing - Explains the key principles of each process, including the equipment used and the effects of processing on micro-organisms that contaminate foods - Describes post-processing operations, including packaging and distribution logistics

Download or read book Nanotechnology in Edible Food Packaging written by Vimal Katiyar and published by Springer Nature. This book was released on 2021-03-27 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: p="" This volume delivers a systematic overview of nanotechnology in the development of edible food packaging with noteworthy characteristics for improved food quality. It covers current research trends, history outlines, and state of the global marketin combination with associated biomaterials and synthesis strategies. The contents detail the use of various emerging bionanostructured materials such as cellulose nanostructures, chitosan nanostructures, and more.It further deliberates an in-depth discussion on various synthesis strategies and routes for the development of edible food packaging in terms of utilizing various nanosystems such as polymeric nanocomposites, nanoencapsulation systems, nanoemulsion systems, and others.Further, it also discusses experimental practices for bionanostructured and edible packaging materials to check the effectivity in terms of offering enhanced shelf life of food products. It also touches upon the socio-techno challenges in-line with developing edible packaging materials using nanotechnology for high performance packaging application. The book is an excellent guide for both the academia and industry especially early career professionals in edible food packaging sectors for selecting proper biomaterial involvingbiofillers, modifiers, cross linkers, compatibilizers and others to enhance the property of edible food packaging for targeted features. ^

Download or read book Food Emulsifiers and Their Applications written by Richard W Hartel and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food emulsions have existed since long before people began to process foods for distribution and consumption. Milk, for example, is a natural emulsion/colloid in which a nutritional fat is stabilized by a milk-fat-globule membrane. Early processed foods were developed when people began to explore the art of cuisine. Butter and gravies were early foods used to enhance flavors and aid in cooking. By contrast, food emulsifiers have only recently been recognized for their abil ity to stabilize foods during processing and distribution. As economies of scale emerged, pressures for higher quality and extension of shelf life prodded the de velopment of food emulsifiers and their adjunct technologies. Natural emulsifiers, such as egg and milk proteins and phospholipids, were the first to be generally utilized. Development of technologies for processing oils, such as refining, bleaching, and hydrogenation, led to the design of synthetic food emulsifiers. Formulation of food emulsions has, until recently, been practiced more as an art than a science. The complexity offood systems has been the barrier to funda mental understanding. Scientists have long studied emulsions using pure water, hydrocarbon, and surfactant, but food systems, by contrast, are typically a com plex mixture of carbohydrate, lipid, protein, salts, and acid. Other surface-active ingredients, such as proteins and phospholipids, can demonstrate either syner- XV xvi Preface gistic or deleterious functionality during processing or in the finished food.

Download or read book Thickening and Gelling Agents for Food written by A. Imeson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thickening and gelling agents are invaluable for providing high quality foods with consistent properties, shelf stability and good consumer appeal and acceptance. Modern lifestyles and consumer demands are expected to increase the requirements for these products. Traditionally, starch and gelatin have been used to provide the desired textural properties in foods. Large-scale processing technology places greater demands on the thickeners and gelling agents employed. Modified starches and specific qualities of gelatin are required, together with exudate and seed gums, seaweed extracts and, most recently, microbial polysaccharides, to improve product mouthfeel properties, handling, and stability characteristics. These hydrocolloids have been established as valuable food additives as a result of extensive practical experience with different products. Nevertheless, the last few years have produced much additional research data from sophisticated new analytical methods. Information on the fine structure of these complex molecules has given a tremendous insight into the three-dimensional conformation of hydro colloids and their behaviour in solution. Critical components within the biopolymer have been identified which provide particular thickening, suspending, stabilising, emulsifying and gelling properties. Contributions for this book have been provided by senior development managers and scientists from the major hydrocolloid suppliers in the US and Europe. The wealth of practical experience within this industry, together with chemical, structural and functional data, has been collated to provide an authoritative and balanced view of the commercially significant thickening and gelling agents in major existing and potential food applications.

Download or read book Natural Food Additives Ingredients and Flavourings written by D Baines and published by Elsevier. This book was released on 2012-03-21 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the links between health and food additives come under increasing scrutiny, there is a growing demand for food containing natural rather than synthetic additives and ingredients. Natural food additives, ingredients and flavourings reviews the legislative issues relating to natural food additives and ingredients, the range of natural food additives and ingredients, and their applications in different product sectors.After an exploration of what the term 'natural' means in the context of food ingredients, part one focuses on natural food colourings, low-calorie sweeteners and flavour enhancers, followed by a consideration of natural antioxidants and antimicrobials as food ingredients. The book goes on to review clean label starches and proteins, the application of natural hydrocolloids as well as natural aroma chemicals and flavourings from biotechnology and green chemistry. Part two considers specific applications in different products. Natural ingredients in savoury food products, baked goods and alcoholic drinks are examined, as are natural plant extracts in soft drinks and milk-based food ingredients.With is distinguished editors and expert team of international contributors, Natural food additives, ingredients and flavourings is an invaluable reference tool for all those involved in the development and production of foods with fewer synthetic additives and ingredients. - Reviews the legislative issues relating to natural food additives and ingredients, the range of natural food additives and ingredients, and their applications in different product sectors - Explores what the term 'natural' means in the context of food ingredients, focusses on natural food colourings, low-calorie sweeteners and flavour enhancers, and considers natural antioxidants and antimicrobials as food ingredients - Examines natural ingredients in savoury food products, baked goods and alcoholic drinks, natural plant extracts in soft drinks and milk-based food ingredients

Download or read book Meat Processing Technology for Small to Medium scale Producers written by Gunter Heinz and published by . This book was released on 2007 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corn written by Sergio O. Serna-Saldivar and published by Elsevier. This book was released on 2018-11-09 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corn: Chemistry and Technology, Third Edition, provides a broad perspective on corn from expert agronomists, food scientists and geneticists. This encyclopedic storehouse of comprehensive information on all aspects of the world's largest crop (in metric tons) includes extensive coverage of recent development in genetic modification for the generation of new hybrids and genotypes. New chapters highlight the importance of corn as a raw material for the production of fuel bioethanol and the emerging topic of phytochemicals or nutraceutical compounds associated to different types of corns and their effect on human health, especially in the prevention of chronic diseases and cancer. Written by international experts on corn, and edited by a highly respected academics, this new edition will remain the industry standard on the topic. - Presents new chapters that deal with specialty corns, the production of first generation bioethanol, and the important relationship of corn phytochemicals or nutraceuticals with human health - Provides contributions from a new editor and a number of new contributors who bring a fresh take on this highly successful volume - Includes vastly increased content relating to recent developments in genetic modification for the generation of new hybrids and genotypes - Contains encyclopedic coverage of grain chemistry and nutritional quality of this extensively farmed product - Covers the production and handling of corn, with both food and non-food applications