Download or read book Effects of Non Newtonian Rheology on the Line Contact Elastohydrodynamic Lubrication Problem written by C. N. Davies and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rheology and Elastohydrodynamic Lubrication written by B.O. Jacobson and published by Elsevier. This book was released on 1991-07-24 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a thorough overview on recent developments in lubricant rheology, elastohydrodynamic lubrication and the effects of surface roughness and particulate contamination in the lubricant on the overall behaviour of a heavily loaded lubricated contact. One of the aims of the book is to make clear to the reader that a Newtonian model for the lubricant behaviour does not have enough degrees of freedom to be able to describe the friction - traction behaviour of heavily loaded lubricated contacts or the oil film build-up and collapse under surface asperities for rough surfaces. The book contains quite a lot of experimental data of lubricants at high pressures, both solidification pressures, compressibilities and shear strength increase coefficients, which make it possible to estimate the friction and power loss in heavily loaded lubricated contacts for different pressures, temperatures, sliding speeds, and lubricant types. This is the first time that data of this type has been included in a textbook and it is hoped that the questions highlighted will serve to initiate and guide future research in this field.
Download or read book Elasto Hydrodynamic Lubrication written by D. Dowson and published by Elsevier. This book was released on 2014-07-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elasto-Hydrodynamic Lubrication deals with the mechanism of elasto-hydrodynamic lubrication, that is, the lubrication regime in operation over the small areas where machine components are in nominal point or line contact. The lubrication of rigid contacts is discussed, along with the effects of high pressure on the lubricant and bounding solids. The governing equations for the solution of elasto-hydrodynamic problems are presented. Comprised of 13 chapters, this volume begins with an overview of elasto-hydrodynamic lubrication and representation of contacts by cylinders, followed by a discussion on equations relevant to lubrication, including the Reynolds equation. The reader is then introduced to lubrication of rigid cylinders; the importance of film thickness in highly loaded rigid contacts; the elasticity of solids in contact; and the theory of elasto-hydrodynamic lubrication. Subsequent chapters focus on apparatus and measurements of film thickness and film shape; friction and viscosity; and lubrication of gears and roller bearings. This book will be of interest to tribologists.
Download or read book Modeling and Analysis of Elastohydrodynamic Lubrication of Line Contacts Considering Thermal and Non Newtonian Effects written by Hsing-Sen Hsiao and published by . This book was released on 1992 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrodynamic Lubrication of Non Newtonian Fluids written by Ping Huang and published by Elsevier. This book was released on 2022-09-10 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamic Lubrication of Non-Newtonian Fluids covers basic theory, lubrication failure and numerical methods and procedures. The title offers a feasible method for solving the hydrodynamic lubrication problem for non-Newtonian fluids. Whereas hydrodynamic lubrication in Newtonian fluids can be solved using the existing Reynolds equation, hydrodynamic lubrication in non-Newtonian fluid is much more difficult to solve because the non-Newtonian constitutive equation is nonlinear. Engineers and technicians working on non-Newtonian fluid lubrication calculation and analysis will find this to be an invaluable reference on the latest thinking on hydrodynamic lubrication. This book presents a unified solution to hydrodynamic lubrication in non-Newtonian fluids, proposing a flow separation method. In addition, the title gives methods and insights into viscosity in non-Newtonian fluids, the lubrication failure mechanism and fluid lubrication mechanism carrying capacity. - Offers a solution to hydrodynamic lubrication in non-Newtonian fluids - Covers a new separation method and sets up an integral differential equation towards a unified method - Provides insights into the viscosity of non-Newtonian fluids, putting forward incremental and full viscosity as important concepts - Analyzes the lubrication failure mechanism and fluid lubrication mechanism carrying capacity - Presents researchers with a way of calculating and analyzing fluid dynamic pressure lubrication, flap lubrication and hot-bounce lubrication of common non-Newtonian fluids
Download or read book Elastohydrodynamic Lubrication for Line and Point Contacts written by Ilya I. Kudish and published by CRC Press. This book was released on 2013-06-17 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastohydrodynamic Lubrication for Line and Point Contacts: Asymptotic and Numerical Approaches describes a coherent asymptotic approach to the analysis of lubrication problems for heavily loaded line and point contacts. This approach leads to unified asymptotic equations for line and point contacts as well as stable numerical algorithms for the solution of these elastohydrodynamic lubrication (EHL) problems. A Unique Approach to Analyzing Lubrication Problems for Heavily Loaded Line and Point Contacts The book presents a robust combination of asymptotic and numerical techniques to solve EHL problems for lightly and heavily loaded line and point contacts. It also proposes a reasonably simple and naturally based regularization approach that produces stable solutions in heavily loaded EHL contacts. The book offers a clear understanding of the processes taking place in heavily loaded line and point EHL contacts as well as of the proper solution structure for EHL problems. It outlines concrete ways to determine important design parameters such as lubrication film thickness and frictional stresses and forces. The book establishes a close link between EHL problems for heavily loaded point and line contacts. Fine Tune Your Methods for Solving Elastohydrodynamic Lubrication Problems In most cases, the equations in the book are derived from first principles. The author describes each of the asymptotic and numerical methods in detail, making it easier for readers to apply them to various problems. The problem solutions are presented in the form of simple analytical formulas, graphs, and tables. Almost all the chapters include exercises that highlight key points and skills. Suitable for engineering and applied mathematics students, this is also a unique resource for researchers and practitioners who want to fine tune their solution methods and design better numerical methods to tackle elastohydrodynamic lubrication problems.
Download or read book Non Newtonian Effects in Point Contact Elastohydrodynamic Lubrication written by Catherine A. Holt and published by . This book was released on 1993 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elastohydrodynamic Lubrication for Line and Point Contacts written by Ilya I. Kudish and published by CRC Press. This book was released on 2013-06-17 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastohydrodynamic Lubrication for Line and Point Contacts: Asymptotic and Numerical Approaches describes a coherent asymptotic approach to the analysis of lubrication problems for heavily loaded line and point contacts. This approach leads to unified asymptotic equations for line and point contacts as well as stable numerical algorithms for the so
Download or read book Rheological Effects on Friction in Elastohydrodynamic Lubrication written by Edward G. Trachman and published by . This book was released on 1973 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: An analytical and experimental investigation is presented of the friction in a rolling and sliding elastohydrodynamic lubricated contact. The rheological behavior of the lubricant is described in terms of two viscoelastic models. These models represent the separate effects of non-Newtonian behavior and the transient response of the fluid. A unified description of the non-Newtonian shear rate dependence of the viscosity is presented as a new hyperbolic liquid model. The transient response of viscosity, following the rapid pressure rise encountered in the contact, is described by a compressional viscoelastic model of the volume response of a liquid to an applied pressure step. The resulting momentum and energy equations are solved by an iterative numerical technique, and a friction coefficient is calculated. The experimental study was performed, with two synthetic paraffinic lubricants, to verify the friction predictions of the analysis. The values of friction coefficient from theory and experiment are in close agreement.
Download or read book Numerical Calculation of Elastohydrodynamic Lubrication written by Ping Huang and published by John Wiley & Sons. This book was released on 2015-09-21 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book not only offers scientists and engineers a clear inter-disciplinary introduction and orientation to all major EHL problems and their solutions but, most importantly, it also provides numerical programs on specific application in engineering. • A one-stop reference providing equations and their solutions to all major elastohydrodynamic lubrication (EHL) problems, plus numerical programs on specific applications in engineering • offers engineers and scientists a clear inter-disciplinary introduction and a concise program for practical engineering applications to most important EHL problems and their solutions • brings together a number of case studies in one text, each being solved using solution methods which share common features and methods
Download or read book Thermal Non Newtonian Elastohydrodynamic Lubrication of Line Contacts Under Sliding rolling and Simple Sliding Conditions written by Shao Wang and published by . This book was released on 1991 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thermal Reynolds-Eyring equation is derived to study the elastohydrodynamic lubrication of line contacts. This lubrication condition is usually found in spur gears, roller bearings and cams. The inlet region with back-flow is treated with a control volume scheme to obtain the temperature solution. A computationally-simple formulation for the stationary surface temperature is developed for simple sliding conditions. The most influential dimensionless groups are identified from the complete sets of dimensionless groups. Numerical results obtained for sliding and rolling and for simple sliding conditions are used to develop formulas for the thermal and non-Newtonian (Ree-Eyring) film thickness reduction factor. Even when thermal effects are small, these formulas can still give a film thickness reduction due to the non-Newtonian effects. Results for the maximum temperatures and traction coefficient are also presented. The pressure dependence of lubricant thermal conductivity is found to significantly affect the maximum lubricant temperature. The thermal effects on film thickness and traction are found to be more pronounced for simple sliding than for combined sliding and rolling conditions. Under simple sliding, the heat transferred to the stationary surface is found to be very small compared to that transferred to the moving surface and lubricating fluid.
Download or read book A Circular Non Newtonian Fluid Model written by Rong-Tsong Lee and published by . This book was released on 1989 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A circular non-Newtonian fluid model and system approach is used in this paper to study the effect of a stationary surface irregularity where the film shape has been modified in the conjunctions of line contacts. A modified transient Reynolds equation is developed in this paper and is used to study the effect of a moving surface irregularity in the problem of microelastohydrodynamic lubrication. Lubrication performance factors such as pressure and film profiles were studied for both a stationary and a moving surface irregularity in a lubricated conjunction. The shear stress and traction coefficient for various height of the surface irregularity were also studied for a stationary surface irregularity. Results show that the film shape obtained from full-film elastohydrodynamic lubrication theory still gave a good prediction except when the surface irregularity occurred at inlet (Xp = − 1.0), but it failed to explain the high pressure and film fluctuations around the surface irregularity which was in the Hertzian contact zone. A bump or a groove occurring in the outlet around (Xp = 1.0) significantly affected the location of the outlet boundary, and the depth of the nip film thickness in the outlet caused by the surface irregularity profoundly affected the pressure spike for both a stationary and a moving surface irregularity.
Download or read book Effects of Non Newtonian Lubricant Rheology on Elastohydrodynamic Lubrication of Piston Skirts in Engine Initial Start Up Condition written by Usman Chaudhri and published by . This book was released on 2014 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal and Non Newtonian Effects in Elastohydrodynamic Lubrication of Rolling sliding Contacts written by Moosa Zand and published by . This book was released on 1990 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elastohydrodynamics written by Ramsey Gohar and published by . This book was released on 1988 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Tribology written by Q. Jane Wang and published by Springer. This book was released on 2013-09-26 with total page 4139 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRIBOLOGY – the study of friction, wear and lubrication – impacts almost every aspect of our daily lives. The Springer Encyclopedia of Tribology is an authoritative and comprehensive reference covering all major aspects of the science and engineering of tribology that are relevant to researchers across all engineering industries and related scientific disciplines. This is the first major reference that brings together the science, engineering and technological aspects of tribology of this breadth and scope in a single work. Developed and written by leading experts in the field, the Springer Encyclopedia of Tribology covers the fundamentals as well as advanced applications across material types, different length and time scales, and encompassing various engineering applications and technologies. Exciting new areas such as nanotribology, tribochemistry and biotribology have also been included. As a six-volume set, the Springer Encyclopedia of Tribology comprises 1630 entries written by authoritative experts in each subject area, under the guidance of an international panel of key researchers from academia, national laboratories and industry. With alphabetically-arranged entries, concept diagrams and cross-linking features, this comprehensive work provides easy access to essential information for both researchers and practicing engineers in the fields of engineering (aerospace, automotive, biomedical, chemical, electrical, and mechanical) as well as materials science, physics, and chemistry.
Download or read book Finite Element Modeling of Elastohydrodynamic Lubrication Problems written by Wassim Habchi and published by John Wiley & Sons. This book was released on 2018-03-21 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the latest developments in modeling elastohydrodynamic lubrication (EHL) problems using the finite element method (FEM) This comprehensive guide introduces readers to a powerful technology being used today in the modeling of elastohydrodynamic lubrication (EHL) problems. It provides a general framework based on the finite element method (FEM) for dealing with multi-physical problems of complex nature (such as the EHL problem) and is accompanied by a website hosting a user-friendly FEM software for the treatment of EHL problems, based on the methodology described in the book. Finite Element Modeling of Elastohydrodynamic Lubrication Problems begins with an introduction to both the EHL and FEM fields. It then covers Standard FEM modeling of EHL problems, before going over more advanced techniques that employ model order reduction to allow significant savings in computational overhead. Finally, the book looks at applications that show how the developed modeling framework could be used to accurately predict the performance of EHL contacts in terms of lubricant film thickness, pressure build-up and friction coefficients under different configurations. Finite Element Modeling of Elastohydrodynamic Lubrication Problems offers in-depth chapter coverage of Elastohydrodynamic Lubrication and its FEM Modeling, under Isothermal Newtonian and Generalized-Newtonian conditions with the inclusion of Thermal Effects; Standard FEM Modeling; Advanced FEM Modeling, including Model Order Reduction techniques; and Applications, including Pressure, Film Thickness and Friction Predictions, and Coated EHL. This book: Comprehensively covers the latest technology in modeling EHL problems Focuses on the FEM modeling of EHL problems Incorporates advanced techniques based on model order reduction Covers applications of the method to complex EHL problems Accompanied by a website hosting a user-friendly FEM-based EHL software Finite Element Modeling of Elastohydrodynamic Lubrication Problems is an ideal book for researchers and graduate students in the field of Tribology.
