Download or read book Effects of Deformation on Annealing and Precipitation Behavior of Aluminum Alloys written by Kun-Fong Wu and published by . This book was released on 1997 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Precipitation Hardening written by J. W. Martin and published by Elsevier. This book was released on 2013-10-22 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precipitation Hardening deals with precipitation hardening, an important method by which the resistance to plastic deformation of a metal crystal may be increased. The impact made by X-ray methods, dislocation concepts, and electron microscopy is highlighted. This book is divided into four sections and begins by outlining the broad basis of age-hardening, touching on topics such as the mechanisms of diffusion, phase equilibria, and nucleation. The X-ray metallography and electron microscopy of aging are examined next, along with changes in mechanical and physical properties on aging. This discussion is followed by a chapter on the metallography of aged alloys and theories of the mechanisms of hardening. The next section discusses the slip interference theory of the hardening of metals; precipitation hardening of aluminum-magnesium-zinc alloys and reversion through age-hardening; and the influence of small additions of silver on the aging of aluminum alloys. The final section outlines some theories of the mechanisms of hardening. This monograph will be useful to students and practitioners in the field of metallurgy.
Download or read book Influence of the Precipitation state on the Thermal Stability of Severely Deformed Aluminum Alloys written by Rolf Berghammer and published by Cuvillier Verlag. This book was released on 2014-10-29 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: A promising way to increase the strength of aluminum alloys is by grain refinement. Therefore the production of so-called ultra-fine grained (UFG) microstructures by severe plastic deformation (SPD) is a very interesting topic. One of the most common SPD processes is Equal Channel Angular Pressing (ECAP), which was compared to Confined Channel Die Pressing (CCDP) and cold rolling.In the focus of this work lays on the one hand the influence of different precipitation states on the formation of UFG structures and their influence on the mechanical properties and on the other hand it was examined if the thermal stability of these structures can be improved either by supersaturated solid solution(by impurity drag) or by precipitates (by grain boundary pinning).With a better understanding of the ongoing softening mechanisms a good combination of high strength and good ductility can be achievedby alternating SPD and heat treatment.
Download or read book Deformation Kinetics written by A. S. Krausz and published by Wiley-Interscience. This book was released on 1975 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Combined Deformation and Heat Treatment on Properties of Aluminum Alloys Vlnyanie Sovmeshchennoi Deformatsionno Termicheskoi Obrabotki Na Svoistva Alyuminievykh Splavov written by M. Kh Rabinovich and published by . This book was released on 1970 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of combined treatment on the properties and structure of a broad class of alloys are investigated. The results of tests indicate that combined treatment has a negative effect on alloys in the freshly annealed state. The hardness of alloys after deformation at the temperature of normal hardening with subsequent rapid cooling was less than that of the same alloys after only quenching. (Author).
Download or read book Advanced Aluminum Alloys Containing Scandium written by L S Toropova and published by Routledge. This book was released on 2017-07-05 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to generalize and analyze the extensive experimental and theoretical results on the phase composition, structure, and properties of aluminum alloys containing scandium. The effects of scandium on these properties are studied from a physico- chemical viewpoint. The authors present binary, ternary, and more complex phase diagrams for these alloys and consider in detail recrystallization, superplastic behavior, and decomposition of supersaturated solid solutions and the effects of solidification conditions on phase equilibria.
Download or read book Physics and Engineering of Metallic Materials written by Yafang Han and published by Springer. This book was released on 2019-02-14 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers from the Chinese Materials Conference 2018 (CMC2018) held in Xiamen City, Fujian, China, on July 12–16, 2018. The Chinese Materials Conference (CMC) is the Chinese Materials Research Society’s most important conference series and has been held annually since the early 1990s. The 2018 edition consisted of 32 domestic symposia, 2 international symposia and 1 international materials forum. This proceedings book covers the fields of powder metallurgy, advanced aluminum alloys, advanced magnesium alloys, superalloys, metal matrix composites, space materials science and technology, as well as nanoporous metal materials, and presents recent original research findings from more than 300 research groups at various universities and research institutes.
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.
Download or read book Hot Deformation of Aluminum Alloys III written by Zhe Jin and published by TMS Publishing Company. This book was released on 2003 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is the proceedings of the third symposium on Hot Deformation in Aluminum Alloys, held in San Diego, CA, March 3-6, 2003."--p. xi.
Download or read book 13th International Conference on Aluminum Alloys ICAA 13 written by Hasso Weiland and published by Springer. This book was released on 2017-02-28 with total page 1857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the 13th International Conference on Aluminum Alloys (ICAA-13), the premier global conference for exchanging emerging knowledge on the structure and properties of aluminum materials. The papers are organized around the topics of the science of aluminum alloy design for a range of market applications; the accurate prediction of material properties; novel aluminum products and processes; and emerging developments in recycling and applications using both monolithic and multi-material solutions.
Download or read book Mechanical Properties of Zirconium written by F. D. Rosi and published by . This book was released on 1952 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminium Alloys written by Subbarayan Sivasankaran and published by BoD – Books on Demand. This book was released on 2017-12-21 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major issue of energy saving and conservation of the environment in the world is being emphasized to us to concentrate on lightweight materials in which aluminium alloys are contributing more in applications in the twenty-first century. Aluminium and its related materials possess lighter weight, considerable strength, more corrosion resistance and ductility. Especially from the past one decade, the use of aluminium alloys is increasing in construction field, transportation industries, packaging purposes, automotive, defence, aircraft and electrical sectors. Around 85% is being used in the form of wrought products, which replace the use of cast iron. Further, the major features of aluminium alloy are recyclability and its abundant availability in the world. In general, aluminium and its related materials are being processed via casting, drawing, forging, rolling, extrusion, welding, powder metallurgy process, etc. To improve the physical and mechanical properties, scientists are doing more research and adding some second-phase particles in to it called composites in addition to heat treatment. Therefore, to explore more in this field, the present book has been aimed and focused to bridge all scientists who are working in this field. The main objective of the present book is to focus on aluminium, its alloys and its composites, which include, but are not limited to, the various processing routes and characterization techniques in both macro- and nano-levels.
Download or read book Effect of Plastic Deformation on Subsequent Decomposition in Aluminum Alloys written by Nikolaĭ Nikolaevich Buĭnov and published by . This book was released on 1953 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Light Metals 2012 written by Carlos Suarez and published by Springer. This book was released on 2016-12-23 with total page 1314 pages. Available in PDF, EPUB and Kindle. Book excerpt: An update of the definitive annual reference source in the field of aluminum production and related light metals technologies, a great mix of materials science and practical, applied technology surrounding aluminum, bauxite, aluminum reduction, rolling, casting, and production.
Download or read book Hot Deformation of Aluminum Alloys II written by Thomas R. Bieler and published by Minerals, Metals, & Materials Society. This book was released on 1998 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: These symposium proceedings from the 1998 TMS Fall Meeting examine the relationships between mechanical behavior and microstructural evolution that must be quantified to develop predictive models for hot deformation. Issues addressed include constitutive modeling; process design and modeling; laboratory simulation of large scale hot working processes; the evolution of microstructure; texture, damage, dynamic precipitation, recovery, and recrystallization processes; creep and superplastic deformation; and the ability to predict phenomena such as corrosion and formability after hot deformation.
Download or read book Thermo Mechanical Processing of Metallic Materials written by Bert Verlinden and published by Elsevier. This book was released on 2007-06-07 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject, including the microstructure determined mechanical properties of metals. The second section deals with the current mechanical technology of plastic forming of metals. The concluding section demonstrates the interaction of the first two disciplines in a series of case studies of successful current TMP processing and looks ahead to possible new developments in the field. This text is designed for use by graduate students coming into the field, for a graduate course textbook, and for Materials and Mechanical Engineers working in this area in the industry. * Covers both physical metallurgy and metals processing* Links basic science to real everyday applications* Written by four internationally-known experts in the field
Download or read book Aluminum written by John E. Hatch and published by ASM International. This book was released on 1984-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive information for the American aluminium industry Collective effort of 53 recognized experts on aluminium and aluminium alloys Joint venture by world renowned authorities-the Aluminium Association Inc. and American Society for Metals. The completely updated source of information on aluminium industry as a whole rather than its individual contributors. this book is an opportunity to gain from The knowledge of the experts working for prestigious companies such as Alcoa, Reynolds Metals Co., Alcan International Ltd., Kaiser Aluminium & Chemical Corp., Martin Marietta Laboratories and Anaconda Aluminium Co. It took four years of diligent work to complete this comprehensive successor to the classic volume, Aluminium, published by ASM in 1967. Contents: Properties of Pure Aluminum Constitution of Alloys Microstructure of Alloys Work Hardening Recovery, Recrystalization and Growth Metallurgy of Heat Treatment and General Principles of Precipitation Hardening Effects of Alloying Elements and Impurities on Properties Corrosion Behaviour Properties of Commercial Casting Alloys Properties of Commercial Wrought Alloys Aluminum Powder and Powder Metallurgy Products.
