Download or read book Effects of Deep Rolling and Its Modification on Fatigue Performance of Aluminium Alloy AA6110 written by Patiphan Juijerm and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Behavior and Residual Stress Stability of Deep rolled Aluminium Alloys AA5083 and AA6110 at Elevated Temperature written by Patiphan Juijerm and published by kassel university press GmbH. This book was released on 2007 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminium Alloys written by Zaki Ahmad and published by BoD – Books on Demand. This book was released on 2012-12-05 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium alloys have undergone a dramatic transformation in areas of extrusion, machining, welding, heat treatment, structural changes, created by ultra fine particles and enhanced corrosion resistance. Hence, these alloys have made rapid gains in European automotive and space industry. These developments have been described by experts in the book with new data and attractive graphics. The effect of processing parameters, including welding and deep rolling on their performance have been highlighted to alleviate the concerns of manufacturers and designers for new applications. The novel role of aluminum alloys in photovoltaic cells and concentrated solar power has been comprehensively described in the context of corrosion and the aggressive environment to which they may be exposed. The book is designed to serve as a guide for future innovations and new developments in aluminium alloys.
Download or read book Residual Stresses 2016 written by Thomas M. Holden and published by Materials Research Forum LLC. This book was released on 2017-03-15 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Residual Stresses 10 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. The proceedings offer an overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas.
Download or read book IIW Recommendations On Methods for Improving the Fatigue Strength of Welded Joints written by P J Haagensen and published by Woodhead Publishing. This book was released on 2013-01-25 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The weld toe is a primary source of fatigue cracking because of the severity of the stress concentration it produces. Weld toe improvement can increase the fatigue strength of new structures significantly. It can also be used to repair or upgrade existing structures. However, in practice there have been wide variations in the actual improvements in fatigue strength achieved. Based on an extensive testing programme organised by the IIW, this report reviews the main methods for weld toe improvement to increase fatigue strength: burr grinding, TIG dressing and hammer and needle peening. The report provides specifications for the practical use of each method, including equipment, weld preparation and operation. It also offers guidance on inspection, quality control and training as well as assessments of fatigue strength and thickness effects possible with each technique. IIW recommendations on methods for improving the fatigue strength of welded joints will allow a more consistent use of these methods and more predictable increases in fatigue strength. Provides specifications for the practical use of each weld toe method, including equipment, weld preparation and operation Offers guidance on inspection, quality control and training, as well as assessments of fatigue strength and thickness effects possible with each technique This report will allow a more consistent use of these methods and more predictable increases in fatigue strength
Download or read book Light Alloys written by Ian Polmear and published by Elsevier. This book was released on 2005-11-11 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive overview of the science and metallurgy of aluminum, magnesium, titanium and beryllium alloys, this is the only book available covering the background materials science, properties, manufacturing processes and applications of these key engineering metals in a single accessible volume. Use of these metals is now more widespread than ever, and they are routinely found in motor vehicles and aircraft. New material includes materials characteristics and applications; heat treatment properties; fabrication; microstructure/property relationships; new applications and processes. The definitive single volume overview New material on processing, characteristics and applications of these essential metals Covers the latest applications and processes in the auto and aero industries
Download or read book Aluminium Alloys New Trends in Fabrication and Applications written by Leroy Sidney and published by . This book was released on 2016-04-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book entitled Aluminium Alloys - New Trends in Fabrication and Applications, emphasizes on future innovations and new developments in aluminium alloys. Aluminium is the worlds most abundant metal and is the third most common element, comprising 8% of the earths crust. The versatility of aluminium makes it the most widely used metal after steel. Although aluminium compounds have been used for thousands of years, aluminium metal was first produced around 170 years ago. Aluminium alloys have undergone a dramatic transformation in areas of extrusion, machining, welding, heat treatment, structural changes, created by ultra fine particles and enhanced corrosion resistance. Hence, these alloys have made rapid gains in automotive and space industry. Aluminium alloys are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heattreatable and non-heat-treatable. About 85% of aluminium is used for wrought products, such as rolled plate, foils and extrusions. Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system is AlSi, where the high levels of contribute to give good casting characteristics. Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required. The properties of the various aluminium alloys has resulted in aluminium being used in industries as diverse as transport, food preparation, energy generation, packaging, architecture, and electrical transmission applications. Depending upon the application, aluminium can be used to replace other materials like copper, steel, zinc, tin plate, stainless steel, titanium, wood, paper, concrete and composites. The novel role of aluminium alloys in photovoltaic cells and concentrated solar power has been comprehensively described in the context of corrosion and the aggressive environment to which they may be exposed.
Download or read book Handbook of Residual Stress and Deformation of Steel written by George E. Totten and published by ASM International. This book was released on 2002 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Examines the factors that contribute to overall steel deformation problems. The 27 articles address the effect of materials and processing, the measurement and prediction of residual stress and distortion, and residual stress formation in the shaping of materials, during hardening processes, and during manufacturing processes. Some of the topics are the stability and relaxation behavior of macro and micro residual stresses, stress determination in coatings, the effects of process equipment design, the application of metallo- thermo-mechanic to quenching, inducing compressive stresses through controlled shot peening, and the origin and assessment of residual stresses during welding and brazing. Annotation c. Book News, Inc., Portland, OR (booknews.com)
Download or read book IIW Recommendations for the HFMI Treatment written by Gary B. Marquis and published by Springer. This book was released on 2016-09-29 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of recommendations presents an overview of High Frequency Mechanical Impact (HFMI) techniques existing today in the market and their proper procedures, quality assurance measures and documentation. Due to differences in HFMI tools and the wide variety of potential applications, certain details of proper treatments and quantitative quality control measures are presented generally. An example of procedure specification as a quality assurance measure is given in the Appendix. Moreover, the book presents procedures for the fatigue life assessment of HFMI-improved welded joints based on nominal stress, structural hot spot stress and effective notch stress. It also considers the extra benefit that has been experimentally observed for HFMI-treated high-strength steels. The recommendations offer proposals on the effect of loading conditions like high mean stress fatigue cycles, variable amplitude loading and large amplitude/low cycle fatigue cycles. Special considerations for low stress concentration welded joints are also given. In order to demonstrate the use of the guideline, the book provides several fatigue assessment examples.
Download or read book Weldability of High strength Aluminum Alloys written by Robert Melvin Evans and published by . This book was released on 1966 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: This memorandum describes the fusion-welding characteristics, mechanical properties, and stress-corrosion behavior of high-strength, weldable aluminum alloys. These are defined as alloys in which sound welds can be produced and in which at least 50 and 70 percent of the maximum base-metal strength can be retained in the as-welded and post-weld-treated conditions, respectively. Careful selection of joining method and filler metals as well as close control of joining-process parameters is necessary to produce high-strength aluminum weldments. Highest strengths and weld-joint efficiencies in high-strength weldable alloys are achieved with the use of postweld aging and/or mechanical treatments. The best combination of highest strengths and good welding characteristics is found in the 2000 and 7000 alloy series. As compared with the 2000 and 5000 alloy series, the 7000 alloy as a class suffer three major property disadvantages: (1) their tendency to be notch sensitive, (2) their tendency to exhibit low toughness at low temperatures, and (3) their much greater susceptibility to stress-corrosion cracking. Nonetheless, several relatively new 7000 series alloys have been developed which show reasonably good notch toughness to -423 F and which are considered competitive with the 2219 and 2014 alloys for cryogenic applications. (Author).
Download or read book Advances in Friction Stir Welding and Processing written by M.-K. Besharati-Givi and published by Elsevier. This book was released on 2014-12-08 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials Considers heat generation, heat flow and material flow Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP
Download or read book Fatigue Testing and Analysis written by Yung-Li Lee and published by Elsevier. This book was released on 2011-04-18 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Testing and Analysis: Theory and Practice presents the latest, proven techniques for fatigue data acquisition, data analysis, and test planning and practice. More specifically, it covers the most comprehensive methods to capture the component load, to characterize the scatter of product fatigue resistance and loading, to perform the fatigue damage assessment of a product, and to develop an accelerated life test plan for reliability target demonstration. This book is most useful for test and design engineers in the ground vehicle industry. Fatigue Testing and Analysis introduces the methods to account for variability of loads and statistical fatigue properties that are useful for further probabilistic fatigue analysis. The text incorporates and demonstrates approaches that account for randomness of loading and materials, and covers the applications and demonstrations of both linear and double-linear damage rules. The reader will benefit from summaries of load transducer designs and data acquisition techniques, applications of both linear and non-linear damage rules and methods, and techniques to determine the statistical fatigue properties for the nominal stress-life and the local strain-life methods. Covers the useful techniques for component load measurement and data acquisition, fatigue properties determination, fatigue analysis, and accelerated life test criteria development, and, most importantly, test plans for reliability demonstrations Written from a practical point of view, based on the authors' industrial and academic experience in automotive engineering design Extensive practical examples are used to illustrate the main concepts in all chapters
Download or read book Aluminum Lithium Alloys written by N Eswara Prasad and published by Butterworth-Heinemann. This book was released on 2013-09-20 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because lithium is the least dense elemental metal, materials scientists and engineers have been working for decades to develop a commercially viable aluminum-lithium (Al-Li) alloy that would be even lighter and stiffer than other aluminum alloys. The first two generations of Al-Li alloys tended to suffer from several problems, including poor ductility and fracture toughness; unreliable properties, fatigue and fracture resistance; and unreliable corrosion resistance. Now, new third generation Al-Li alloys with significantly reduced lithium content and other improvements are promising a revival for Al-Li applications in modern aircraft and aerospace vehicles. Over the last few years, these newer Al-Li alloys have attracted increasing global interest for widespread applications in the aerospace industry largely because of soaring fuel costs and the development of a new generation of civil and military aircraft. This contributed book, featuring many of the top researchers in the field, is the first up-to-date international reference for Al-Li material research, alloy development, structural design and aerospace systems engineering. Provides a complete treatment of the new generation of low-density AL-Li alloys, including microstructure, mechanical behavoir, processing and applications Covers the history of earlier generation AL-Li alloys, their basic problems, why they were never widely used, and why the new third generation Al-Li alloys could eventually replace not only traditional aluminum alloys but more expensive composite materials Contains two full chapters devoted to applications in the aircraft and aerospace fields, where the lighter, stronger Al-Li alloys mean better performing, more fuel-efficient aircraft
Download or read book New Trends in Alloy Development Characterization and Application written by Zaki Ahmad and published by BoD – Books on Demand. This book was released on 2015-09-24 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the new developments that have taken place in recent years in the processing and application of aluminium alloys. The chapter on self diffusion shows a complete detail of the mechanism of diffusion in aluminium alloys and how it affects the strength. The chapter on native oxide films gives useful information on the films developed on commercial magnesium alloys. On the analytical side, the details of Mossbauer spectroscopy related to aluminium alloys fully described. One recent development in aluminium alloys is the controlling of pitting corrosion by the application of superhydrophobic coatings. Complete details of the theory and application of hydrophobicity related to aluminium alloys is shown in the two chapters related to hydrophobicity. It is hoped that this book will be found useful by researchers and general readers in the areas described in the book.
Download or read book Light Metal Alloys Applications written by Waldemar Alfredo Monteiro and published by BoD – Books on Demand. This book was released on 2014-06-11 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight alloys have become of great importance in engineering for construction of transportation equipment. At present, the metals that serve as the base of the principal light alloys are aluminum and magnesium. One of the most important lightweight alloys are the aluminum alloys in use for several applications (structural components wrought aluminum alloys, parts and plates). However, some casting parts that have low cost of production play important role in aircraft parts. Magnesium and its alloys are among the lightest of all metals and the sixth most abundant metal on earth. Magnesium is ductile and the most machinable of all metals. Many of these light weight alloys have appropriately high strength to warrant their use for structural purposes, and as a result of their use, the total weight of transportation equipment has been considerably decreased.
Download or read book IIW Guidelines on Weld Quality in Relationship to Fatigue Strength written by Bertil Jonsson and published by Springer. This book was released on 2016-04-13 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents guidelines on quantitative and qualitative measures of the geometric features and imperfections of welds to ensure that it meets the fatigue strength requirements laid out in the recommendations of the IIW (International Institute of Welding). Welds that satisfy these quality criteria can be assessed in accordance with existing IIW recommendations based on nominal stress, structural stress, notch stress or linear fracture mechanics. Further, the book defines more restrictive acceptance criteria based on weld geometry features and imperfections with increased fatigue strength. Fatigue strength for these welds is defined as S-N curves expressed in terms of nominal applied stress or hot spot stress. Where appropriate, reference is made to existing quality systems for welds.In addition to the acceptance criteria and fatigue assessment curves, the book also provides guidance on their inspection and quality control. The successful implementation of these methods depends on adequate training for operators and inspectors alike. As such, the publication of the present IIW Recommendations is intended to encourage the production of appropriate training aids and guidelines for educating, training and certifying operators and inspectors.
Download or read book Thermal Analysis of Materials written by Robert Speyer and published by CRC Press. This book was released on 1993-09-16 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing the design and optimum use of thermal analysis instrumentation for materials' property measurement, this work details how the instruments work, what they measure, potential pitfalls and the fitting of experimental results to theoretical models. It presents a tutorial on writing computer programs for data manipulation, advanced thermoanalytical methods and case studies.
