Download or read book Carbonate Additions to Cement written by Paul Klieger and published by ASTM International. This book was released on 1990 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cement Replacement Materials written by Ali Akbar Ramezanianpour and published by Springer Science & Business Media. This book was released on 2013-09-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present the latest findings in the properties and application of Supplementary Cementing Materials and blended cements currently used in the world in concrete. Sustainability is an important issue all over the world. Carbon dioxide emission has been a serious problem in the world due to the greenhouse effect. Today many countries agreed to reduce the emission of CO2. Many phases of cement and concrete technology can affect sustainability. Cement and concrete industry is responsible for the production of 7% carbon dioxide of the total world CO2 emission. The use of supplementary cementing materials (SCM), design of concrete mixtures with optimum content of cement and enhancement of concrete durability are the main issues towards sustainability in concrete industry.
Download or read book The Use of Limestone in Portland Cement written by Rachel Jean Detwiler and published by . This book was released on 1996 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Abstracts written by American Ceramic Society and published by . This book was released on 1993 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1991 with total page 1380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Research Journal written by and published by . This book was released on 1995 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Secondary Ettringite Formation on the Durability of Concrete written by Robert L. Day and published by Portland Cement Association. This book was released on 1992 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report comprises a review and analysis of the available literature pertaining to the causes, effects and prevention of secondary (delayed) ettringite in concrete . Over 300 publications have been examined . Case studies of damage in concrete possibly caused by secondary ettringite formation are examined first. Fundamental research on secondary ettringite formation, its chemistry, and deposition mechanisms is then reviewed. Key investigations on the topic are analyzed in detail. Next, the potential importance of (a) method of heat-curing and (b) the chemistry of cement is outlined. In the final chapter, a rapid test for evaluation of potential secondary ettringite susceptibility (the "Duggan" test) is evaluated. The analysis indicates that there appears to be a potential for a secondary ettringite formation problem in North America; it is highly probable that secondary ettringite formation can lead to significant deterioration of heat-treated concrete. However, it is unlikely that secondary ettringite formation is, or will be, the sole mechanism responsible for premature deterioration. The critical factors that determine extent of damage due to secondary ettringite formation are (a) duration of delay period before heating the concrete; (b) severity of the heating and/or cooling regime ; and (c) the SO3/A1203 ratio of the cement. There is no evidence that nonheat-treated concrete is susceptible to this phenomenon. Further research and improvements to the Duggan test may result in the development of a useful standard test method to assess the long-term dimensional stability and durability of concrete.
Download or read book Cements Research Progress written by and published by . This book was released on 1997 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cement Concrete and Aggregates written by and published by . This book was released on 1995 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Significance of Tests and Properties of Concrete and Concrete making Materials written by Paul Klieger and published by ASTM International. This book was released on 1994 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cementitious Materials written by Herbert Pöllmann and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-18 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aside from water the materials which are used by mankind in highest quantities arecementitious materials and concrete. This book shows how the quality of the technical product depends on mineral phases and their reactions during the hydration and strengthening process. Additives and admixtures infl uence the course of hydration and the properties. Options of reducing the CO2-production in cementitious materials are presented and numerous examples of unhydrous and hydrous phases and their formation conditions are discussed. This editorial work consists of four parts including cement composition and hydration, Special cement and binder mineral phases, Cementitious and binder materials, and Measurement and properties. Every part contains different contributions and covers a broad range within the area. Contents Part I: Cement composition and hydration Diffraction and crystallography applied to anhydrous cements Diffraction and crystallography applied to hydrating cements Synthesis of highly reactive pure cement phases Thermodynamic modelling of cement hydration: Portland cements – blended cements – calcium sulfoaluminate cements Part II: Special cement and binder mineral phases Role of hydrotalcite-type layered double hydroxides in delayed pozzolanic reactions and their bearing on mortar dating Setting control of CAC by substituted acetic acids and crystal structures of their calcium salts Crystallography and crystal chemistry of AFm phases related to cement chemistry Part III: Cementitious and binder materials Chemistry, design and application of hybrid alkali activated binders Binding materials based on calcium sulphates Magnesia building material (Sorel cement) – from basics to application New CO2-reduced cementitious systems Composition and properties of ternary binders Part IV: Measurement and properties Characterization of microstructural properties of Portland cements by analytical scanning electron microscopy Correlating XRD data with technological properties No cement production without refractories
Download or read book A Practical Guide to Microstructural Analysis of Cementitious Materials written by Karen Scrivener and published by CRC Press. This book was released on 2018-10-09 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide from Top-Level Industry Scientists As advanced teaching and training in the development of cementitious materials increase, the need has emerged for an up-to-date practical guide to the field suitable for graduate students and junior and general practitioners. Get the Best Use of Different Techniques and Interpretations of the Results This edited volume provides the cement science community with a state-of-the-art overview of analytical techniques used in cement chemistry to study the hydration and microstructure of cements. Each chapter focuses on a specific technique, not only describing the basic principles behind the technique, but also providing essential, practical details on its application to the study of cement hydration. Each chapter sets out present best practice, and draws attention to the limitations and potential experimental pitfalls of the technique. Databases that supply examples and that support the analysis and interpretation of the experimental results strengthen a very valuable ready reference. Utilizing the day-to-day experience of practical experts in the field, this book: Covers sample preparation issues Discusses commonly used techniques for identifying and quantifying the phases making up cementitious materials (X-ray diffraction and thermogravimetric analysis) Presents good practice oncalorimetry and chemical shrinkage methods for studying cement hydration kinetics Examines two different applications of nuclear magnetic resonance (solid state NMR and proton relaxometry) Takes a look at electron microscopy, the preeminent microstructural characterization technique for cementitious materials Explains how to use and interpret mercury intrusion porosimetry Details techniques for powder characterization of cementitious materials Outlines the practical application of phase diagrams for hydrated cements Avoid common pitfalls by using A Practical Guide to Microstructural Analysis of Cementitious Materials. A one-of-a-kind reference providing the do’s and don’ts of cement chemistry, the book presents the latest research and development of characterisation techniques for cementitious materials, and serves as an invaluable resource for practicing professionals specializing in cement and concrete materials and other areas of cement and concrete technology.
Download or read book Cement written by Friedrich W. Locher and published by Verlag Bau+Technik. This book was released on 2013-03-20 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The successful launch of the German standard work on cement by Prof. Locher in 2000 is now being followed by the publication of the widely requested English language version "Cement" which takes special country-specific features and standards into account. The book is aimed at chemists, physicists, engineers and technologists in the cement industry, in machine construction, the construction industry, materials testing and environmental protection. This clear and practical book will provide them with the understanding of the chemistry of cement needed for their daily work. It will also make an ideal textbook for the study of building materials science at colleges and universities.
Download or read book Materials Science of Concrete VI written by Jan P. Skalny and published by Wiley-American Ceramic Society. This book was released on 2001-08-28 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers on phase composition and quantitative x-ray powder diffraction analysis of Portland cement and clinker; neutron diffraction and neutron scattering studies of cement; scanning probe microscopy: a new view of the mineral surface; the stereological and statistical properties of entrained air voids in concrete: a mathematical basis for air void system characterization; fresh concrete rheology: recent developments; early age behavior of cement-based materials; transport mechanisms and damage: current issues in permeation characteristics of concrete; the use of silica fume to control expansion due to alkali-aggregate reactivity in concrete: a review; delayed ettringite formation in concrete: recent developments and future directions; use of durability indexes to achieve durable cover concrete in reinforced concrete structures; and microfiller partial substitution for cement.
Download or read book Concrete Admixtures Handbook written by V.S. Ramachandran and published by William Andrew. This book was released on 1996-12-31 with total page 1183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition ten years ago, significant developments have occurred in the use of admixtures in concrete. Eight new chapters and a full update of the preceding ten chapters bring this book up to date; reflecting the relative advances made in the science and technology of different groups of admixtures. The increased role and development of admixtures in concrete technology is evidenced by a number of conferences, publications, and novel admixtures available in the market place. These developments in the field caused the modification of many chapters in the first edition in order to reflect the advances. Although individual chapters refer to standards and specifications of admixtures, those only interested in the standards or techniques used in investigating admixtures will find the second chapter (Research Technologies, Standards, and Specifications) useful. Admixtures are not as inert as may be presumed. They may chemically interact with the constituents of concrete and affect the properties of the fresh and hardened concrete and its durability. The third chapter deals with these aspects. It was important to devote a chapter to recent attempts in developing new admixtures.
Download or read book Proceedings American Society for Testing and Materials written by American Society for Testing and Materials and published by . This book was released on 1980 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. 61-66 include technical papers.
Download or read book ASTM Standardization News written by American Society for Testing and Materials and published by . This book was released on 1992 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
