Download or read book Effective Vibration based Signal Processing Methods for Condition Monitoring and Fault Diagnosis of Rolling Bearings written by 樊薇 and published by . This book was released on 2018 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Condition Monitoring with Vibration Signals written by Hosameldin Ahmed and published by John Wiley & Sons. This book was released on 2020-01-07 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an extensive, up-to-date treatment of techniques used for machine condition monitoring Clear and concise throughout, this accessible book is the first to be wholly devoted to the field of condition monitoring for rotating machines using vibration signals. It covers various feature extraction, feature selection, and classification methods as well as their applications to machine vibration datasets. It also presents new methods including machine learning and compressive sampling, which help to improve safety, reliability, and performance. Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines starts by introducing readers to Vibration Analysis Techniques and Machine Condition Monitoring (MCM). It then offers readers sections covering: Rotating Machine Condition Monitoring using Learning Algorithms; Classification Algorithms; and New Fault Diagnosis Frameworks designed for MCM. Readers will learn signal processing in the time-frequency domain, methods for linear subspace learning, and the basic principles of the learning method Artificial Neural Network (ANN). They will also discover recent trends of deep learning in the field of machine condition monitoring, new feature learning frameworks based on compressive sampling, subspace learning techniques for machine condition monitoring, and much more. Covers the fundamental as well as the state-of-the-art approaches to machine condition monitoringguiding readers from the basics of rotating machines to the generation of knowledge using vibration signals Provides new methods, including machine learning and compressive sampling, which offer significant improvements in accuracy with reduced computational costs Features learning algorithms that can be used for fault diagnosis and prognosis Includes previously and recently developed dimensionality reduction techniques and classification algorithms Condition Monitoring with Vibration Signals: Compressive Sampling and Learning Algorithms for Rotating Machines is an excellent book for research students, postgraduate students, industrial practitioners, and researchers.

Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2011-03-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.

Download or read book Condition Monitoring of Rolling Element Bearings written by Atul Andhare and published by LAP Lambert Academic Publishing. This book was released on 2010-05 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rolling bearings are the most important machine elements. Proper functioning of a machine depends on condition of bearings. Vibrations help in diagnosing various faults in machines. Therefore, vibration based condition monitoring is the most popular method to know health of any machine. However, as found from the literature, vibration monitoring and diagnostics of faults in tapered roller bearing is not well established. This book is therefore focused on vibration based condition monitoring of tapered roller bearings. It presents results of experiments performed towards diagnosis of defects in tapered roller bearings using vibration analysis. The bearing vibration data are analyzed using various time and frequency domain techniques. The results for defect-free and defective bearings are compared to get information for defect diagnosis. A MATLAB based computer interface, which was developed for vibration signal processing and diagnostics, is also discussed in the book. This interface made use of all the time and frequency domain vibration data to diagnose defects in bearings. This book will be useful for the practicing engineers and students working on condition monitoring.

Download or read book Fundamentals of Noise and Vibration Analysis for Engineers written by M. P. Norton and published by Cambridge University Press. This book was released on 2003-10-16 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration affects all kinds of engineering structures, and is fast becoming an integral part of engineering courses at universities and colleges around the world. In this second edition, Michael Norton's classic text has been extensively updated to take into account recent developments in the field. Much of the new material has been provided by Denis Karczub, who joins Michael as second author for this edition. This book treats both noise and vibration in a single volume, with particular emphasis on wave-mode duality and interactions between sound waves and solid structures. There are numerous case studies, test cases, and examples for students to work through. The book is primarily intended as a textbook for senior level undergraduate and graduate courses, but is also a valuable reference for researchers and professionals looking to gain an overview of the field.

Download or read book Signal Analysis written by Alfred Mertins and published by Wiley. This book was released on 1999-03-12 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Signal analysis gives an insight into the properties of signals and stochastic processes by methodology. Linear transforms are integral to the continuing growth of signal processes as they characterize and classify signals. In particular, those transforms that provide time-frequency signal analysis are attracting greater numbers of researchers and are becoming an area of considerable importance. The key characteristic of these transforms, along with a certain time-frequency localization called the wavelet transform and various types of multirate filter banks, is their high computational efficiency. It is this computational efficiently which accounts for their increased application. This book provides a complete overview and introduction to signal analysis. It presents classical and modern signal analysis methods in a sequential structure starting with the background to signal theory. Progressing through the book the author introduces more advanced topics in an easy to understand style. Including recent and emerging topics such as filter banks with perfect reconstruction, time frequency and wavelets. With great accuracy and technical merit, this book makes a useful and original contribution to the current literature.

Download or read book Morphology based Fault Feature Extraction and Resampling free Fault Identification Techniques for Rolling Element Bearing Condition Monitoring written by Juanjuan SHI and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: As the failure of a bearing could cause cascading breakdowns of the mechanical system and then lead to costly repairs and production delays, bearing condition monitoring has received much attention for decades. One of the primary methods for this purpose is based on the analysis of vibration signal measured by accelerometers because such data are information-rich. The vibration signal collected from a defective bearing is, however, a mixture of several signal components including the fault-generated impulses, interferences from other machine components, and background noise, where fault-induced impulses are further modulated by various low frequency signal contents. The compounded effects of interferences, background noise and the combined modulation effects make it difficult to detect bearing faults. This is further complicated by the nonstationary nature of vibration signals due to speed variations in some cases, such as the bearings in a wind turbine. As such, the main challenges in the vibration-based bearing monitoring are how to address the modulation, noise, interference, and nonstationarity matters. Over the past few decades, considerable research activities have been carried out to deal with the first three issues. Recently, the nonstationarity matter has also attracted strong interests from both industry and academic community. Nevertheless, the existing techniques still have problems (deficiencies) as listed below: (1) The existing enveloping methods for bearing fault feature extraction are often adversely affected by multiple interferences. To eliminate the effect of interferences, the prefiltering is required, which is often parameter-dependent and knowledge-demanding. The selection of proper filter parameters is challenging and even more so in a time-varying environment. (2) Even though filters are properly designed, they are of little use in handling in-band noise and interferences which are also barriers for bearing fault detection, particularly for incipient bearing faults with weak signatures. (3) Conventional approaches for bearing fault detection under constant speed are no longer applicable to the variable speed case because such speed fluctuations may cause zsmearingy of the discrete frequencies in the frequency representation. Most current methods for rotating machinery condition monitoring under time-varying speed require signal resampling based on the shaft rotating frequency. For the bearing case, the shaft rotating frequency is, however, often unavailable as it is coupled with the instantaneous fault characteristic frequency (IFCF) by a fault characteristic coefficient (FCC) which cannot be determined without knowing the fault type. Additionally, the effectiveness of resampling-based methods is largely dependent on the accuracy of resampling procedure which, even if reliable, can complicate the entire fault detection process substantially. (4) Time-frequency analysis (TFA) has proved to be a powerful tool in analyzing nonstationary signal and moreover does not require resampling for bearing fault identification. However, the diffusion of time-frequency representation (TFR) along time and frequency axes caused by lack of energy concentration would handicap the application of the TFA. In fact, the reported TFA applications in bearing fault diagnosis are still very limited. To address the first two aforementioned problems, i.e., (1) and (2), for constant speed cases, two morphology-based methods are proposed to extract bearing fault feature without prefiltering. Another two methods are developed to specifically handle the remaining problems for the bearing fault detection under time-varying speed conditions. These methods are itemized as follows: (1) An efficient enveloping method based on signal Fractal Dimension (FD) for bearing fault feature extraction without prefiltering, (2) A signal decomposition technique based on oscillatory behaviors for noise reduction and interferences removal (including in-band ones), (3) A prefiltering-free and resampling-free approach for bearing fault diagnosis under variable speed condition via the joint application of FD-based envelope demodulation and generalized demodulation (GD), and (4) A combined dual-demodulation transform (DDT) and synchrosqueezing approach for TFR energy concentration level enhancement and bearing fault identification. With respect to constant speed cases, the FD-based enveloping method, where a short time Fractal dimension (STFD) transform is proposed, can suppress interferences and highlight the fault-induced impulsive signature by transforming the vibration signal into a STFD representation. Its effectiveness, however, deteriorates with the increased complexity of the interference frequencies, particularly for multiple interferences with high frequencies. As such, the second method, which isolates fault-induced transients from interferences and noise via oscillatory behavior analysis, is then developed to complement the FD-based enveloping approach. Both methods are independent of frequency information and free from prefiltering, hence eliminating the tedious process for filter parameter specification. The in-band vibration interferences can also be suppressed mainly by the second approach. For the nonstationary cases, a prefiltering-free and resampling-free strategy is developed via the joint application of STFD and GD, from which a resampling-free order spectrum can be derived. This order spectrum can effectively reveal not only the existence of a fault but also its location. However, the success of this method relies largely on an effective enveloping technique. To address this matter and at the same time to exploit the advantages of TFA in nonstationary signal analysis, a TFA technique, involving dual demodulations and an iterative process, is developed and innovatively applied to bearing fault identification. The proposed methods have been validated using both simulation and experimental data collected in our lab. The test results have shown that the first two methods can effectively extract fault signatures, remove the interferences (including in-band ones) without prefiltering, and detect fault types from vibration signals for constant speed cases. The last two have shown to be effective in detecting faults and discern fault types from vibration data collected under variable speed conditions without resampling and prefiltering.

Download or read book An Enhanced Teager Huang Transform Technique for Bearing Fault Detection written by Zihao Chen and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Rolling element bearings are widely used in rotating machinery. Bearing health condition monitoring plays a vital role in predictive maintenance to recognize bearing faults at an early stage to prevent machinery performance degradation, improve operation quality, and reduce maintenance costs. Although many signal processing techniques have been proposed in literature for bearing fault diagnosis, reliable bearing fault detection remains challenging. This study aims to develop an online condition monitoring system and a signal processing technique for bearing fault detection. Firstly, a Zigbee-based smart sensor data acquisition system is developed for wireless vibration signal collection. An enhanced Teager-Huang transform (eTHT) technique is proposed for bearing fault detection. The eTHT takes the several processing steps: Firstly, a generalized Teager-Kaiser spectrum analysis method is suggested to recognize the most representative intrinsic mode functions as a reference. Secondly, a characteristic relation function is constructed by using cross-correlation. Thirdly, a denoising filter is adopted to improve the signal-to-noise-ratio. Finally, the average generalized Teager-Kaiser spectrum analysis is undertaken to identify the bearing characteristic signatures for bearing fault detection. The effectiveness of the proposed eTHT technique is examined by experimental tests corresponding to different bearing conditions. Its robustness in bearing fault detection is examined by the use of the data sets from a different experimental setup.

Download or read book Online Condition Monitoring and Fault Detection in Induction Motor Bearings written by Turker Sengoz and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Induction motors (IMs) are commonly used in industry. Online IM health condition monitoring aims to recognize motor defect at its early stage to prevent motor performance degradation and reduce maintenance costs. The most common fault in IMs is related to bearing defects. Although many signal processing techniques have been proposed in literature for bearing fault detection using vibration and stator current signals, reliable bearing fault diagnosis still remains a challenging task. One of the reasons is that a rolling element bearing is not a simple component, but a system; its related features could be time-varying and nonlinear in nature. The objective of this study is to investigate an online condition monitoring system for IM bearing fault detection. The monitoring system consists of two main modules: smart data acquisition (DAQ) and bearing fault detection. In this work, a smart current sensor system is developed for data acquisition wirelessly. The DAQ system is tested for wireless data transmission, consistent data sampling, and low power consumption. The data acquisition operation is controlled by using an adaptive interface. In bearing fault detection, a generalized Teager-Kaiser energy (GTKE) technique is proposed for nonlinear bearing feature extraction and fault detection using both vibration and current signals. The proposed GTKE technique will demodulate the signal by tracking the instantaneous signal energy. An optimization method is proposed to enhance the fault-related features and improve signal-to-noise ratio. The effectiveness of the proposed technique is verified experimentally using a series of IM tests. The robustness is examined under different operating conditions.

Download or read book Industrial Approaches in Vibration Based Condition Monitoring written by Jyoti Kumar Sinha and published by CRC Press. This book was released on 2020-01-21 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration-based condition monitoring (VCM) is a well-accepted approach in industries for early detection of any defect, thereby triggering the maintenance process and ultimately reducing overheads and plant downtime. A number of vibration instruments, data analyzer and related hardware and software codes are developed to meet the industry requirements. This book aims to address issues faced by VCM professionals, such as frequency range estimation for vibration measurements, sensors, data collection and data analyzer including related parameters which are explained through step-by-step approaches. Each chapter is written in the tutorial style with experimental and/or industrial examples for clear understanding.

Download or read book Condition Monitoring of Machinery in Non Stationary Operations written by Tahar Fakhfakh and published by Springer Science & Business Media. This book was released on 2012-03-19 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition monitoring of machines in non-stationary operations (CMMNO) can be seen as the major challenge for research in the field of machinery diagnostics. Condition monitoring of machines in non-stationary operations is the title of the presented book and the title of the Conference held in Hammamet - Tunisia March 26 – 28, 2012. It is the second conference under this title, first took place in Wroclaw - Poland , March 2011. The subject CMMNO comes directly from industry needs and observation of real objects. Most monitored and diagnosed objects used in industry works in non-stationary operations condition. The non-stationary operations come from fulfillment of machinery tasks, for which they are designed for. All machinery used in different kind of mines, transport systems, vehicles like: cars, buses etc, helicopters, ships and battleships and so on work in non-stationary operations. The papers included in the book are shaped by the organizing board of the conference and authors of the papers. The papers are divided into five sections, namely: Condition monitoring of machines in non-stationary operations Modeling of dynamics and fault in systems Signal processing and Pattern recognition Monitoring and diagnostic systems Noise and vibration of machines The presented book gives the back ground to the main objective of the CMMNO 2012 conference that is to bring together scientific community to discuss the major advances in the field of machinery condition monitoring in non-stationary conditions.

Download or read book Detection and Diagnosis of Rolling Element Bearing Faults Using Time Encoded Signal Processing and Recognition written by Shukri Ali Abdusslam and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a systematic study of using TESPAR (Time Encoded Signal Processing and Recognition), which presently is in use as an effective tool for speech recognition and shows great advantages in computational demands and accuracy, to develop a new technique for rolling element bearing fault detection and diagnosis. The fundamentals of rolling element bearings are presented in line with different failure modes and relevant monitoring methods in the time domain, the frequency domain, the envelope spectrum and the wavelet analysis. These reviews show that vibration measurements are a proven and widely accepted data source for bearing monitoring of machinery. This research thus has focused on developing TESPAR based approaches using vibration signals which are generated from bearings under different severities of faults located at the outer race, the inner race and the roller element. It firstly examines the theoretical basis of TESPAR and examines the diagnosis performance with a number of different simulated signals, which confirms that TESPAR based methods are able to resolve different signals by using their statistics including S-matrix, A-matrix and epoch duration, which paves a frame work to process and interpolate the bearing signal. With understandings of the insights of bearing vibrations and TESPAR approaches a signal processing framework is then suggested to analyse bearing vibration signals. It consists of a pre-processing step which removes possible noise in the signal, a TESPAR coding step which converts the signal into TESPAR representations-TESPAR streams, a feature calculation step, which produces different TESPAR statistic parameters, and finally a diagnosis step which applies common statistics to TESPAR statistic parameters to obtain required results. The TESPAR solution proposed in this thesis shows that discrimination between different bearing signal waveforms has been implemented successfully. TESPAR S- and A-Matrices were constructed for the cases tested and used together with statistical correlation to differentiate between the types of faults. However, the severities of bearing faults have been identified using another TESPAR feature called the mean absolute magnitude value calculated using epoch durations. The performance of the TESPAR approach was then evaluated against the envelope spectrum; this being the most common method for bearing condition monitoring that is conducted in two terms; the process complexity and diagnosis performance. A major contribution of this research programme is the development of a method that can provide improved detection and diagnosis of bearing fault types and severity of faults seeded into roller bearings.

Download or read book Development of User Interface for Vibration Measurement written by Khaliswaran keresnan and published by . This book was released on 2012 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's industry uses increasingly complex machince, some with extremely demanding performance criteria. Failed machine can lead to economic loss and safety problems due to unexpected production stoppages. Fault diagnosis in the condition monitoring of these machines is crucial for increasing machinery availability and reliability.Fault diagnosis of machinery is often a difficult and daunting task. To be truly effective, the process needs to be analysis to reduce the reliance on manual data interpretation. It is the aim of this research to analysis this process using data from machinery vibrations. This thesis focuses on the development, and application of an analysis diagnosis procedure for rolling elements bearing faults. Rolling element bearings are representative in most industrial rotating machinery. Besides, these elements can also be tested economically in the laboratory using relatively simple test rigs.Novel moden signal processing method were applied to vibration signals collected from rolling elements tests. This included time-frequency signal processing techniques such as FFT.

Download or read book Bearing Technology written by Pranav H. Darji and published by BoD – Books on Demand. This book was released on 2017-05-31 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the twenty-first century, bearings are expected to perform better in the form of various operating conditions, that is from low speed to extremely high speed and from low load to huge load applications. The expectations from the field of bearing technology are great. During the recent years, we have been witnessing the development of a new generation of mechanical systems that are highly miniaturized and very sophisticated, yet extremely robust. Technological progress creates increasingly arduous conditions for rolling mechanisms.

Download or read book Condition Monitoring and Faults Diagnosis of Induction Motors written by Nordin Saad and published by CRC Press. This book was released on 2018-07-11 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers various issues related to machinery condition monitoring, signal processing and conditioning, instrumentation and measurements, faults for induction motors failures, new trends in condition monitoring, and the fault identification process using motor currents electrical signature analysis. It aims to present a new non-invasive and non-intrusive condition monitoring system, which has the capability to detect various defects in induction motor at incipient stages within an arbitrary noise conditions. The performance of the developed system has been analyzed theoretically and experimentally under various loading conditions of the motor. Covers current and new approaches applied to fault diagnosis and condition monitoring. Integrates concepts and practical implementation of electrical signature analysis. Utilizes LabVIEW tool for condition monitoring problems. Incorporates real-world case studies. Paves way a technology potentially for prescriptive maintenance via IIoT.

Download or read book Proceedings of the 2013 International Conference on Electrical and Information Technologies for Rail Transportation EITRT2013 Volume II written by Limin Jia and published by Springer. This book was released on 2014-07-08 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 2013 International Conference on Electrical and Information Technologies for Rail Transportation (EITRT2013) collects the latest research in this field, including a wealth of state-of-the-art research theories and applications in intelligent computing, information processing, communication technology, automatic control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academics and industrial professionals to present the most innovative research on and developments in the field of rail transportation electrical and information technologies. Contributing authors from academia, industry and the government also offer inside views of new, interdisciplinary solutions. Limin Jia is a professor at Beijing Jiaotong University and Chief Scientist at the State Key Lab of Rail Traffic Control and Safety.

Download or read book Non parametric and Non filtering Methods for Rolling Element Bearing Condition Monitoring written by Hamid Faghidi and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Rolling element bearings are one of the most significant elements and frequently-used components in mechanical systems. Bearing fault detection and diagnosis is important for preventing productivity loss and averting catastrophic failures of mechanical systems. In industrial applications, bearing life is often difficult to predict due to different application conditions, load and speed variations, as well as maintenance practices. Therefore, reliable fault detection is necessary to ensure productive and safe operations. Vibration analysis is the most widely used method for detection and diagnosis of bearing malfunctions. A measured vibration signal from a sensor is often contaminated by noise and vibration interference components. Over the years, many methods have been developed to reveal fault signatures, and remove noise and vibration interference components. Though many vibration based methods have been proposed in the literature, the high frequency resonance (HFR) technique is one of a very few methods have received certain industrial acceptance. However, the effectiveness of the HFR methods depends, to a great extent, on some parameters such as bandwidth and centre frequency of the fault excited resonance, and window length. Proper selection these parameters is often a knowledge-demanding and time-consuming process. In particular, the filter designed based on the improperly selected bandwidth and center frequency of the fault excited resonance can filter out the true fault information and mislead the detection/diagnosis decisions. In addition, even if these parameters can be selected properly at beginning of each process, they may become invalid in a time-varying environment after a certain period of time. Hence, they may have to be re-calculated and updated, which is again a time-consuming and error-prone process. This undermines the practical significance of the above methods for online monitoring of bearing conditions. To overcome the shortcomings of existing methods, the following four non-parametric and non-filtering methods are proposed: 1. An amplitude demodulation differentiation (ADD) method, 2. A calculus enhanced energy operator (CEEO) method, 3. A higher order analytic energy operator (HO_AEO) approach, and 4. A higher order energy operator fusion (HOEO_F) technique. The proposed methods have been evaluated using both simulated and experimental data.