Download or read book Effect of Strain Rate on the Ductile Fracture of Advanced High Strength Steel Sheets written by Matthieu Dunand and published by . This book was released on 2013 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Strain Rate on the Mechanical Properties and Fracture Characteristics of a Dual Phase 980 Steel written by Sukanya Sharma and published by . This book was released on 2019 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dual phase (DP) steels are being increasingly used as structural components in the automotive industry owing to their combination of high strength and moderate ductility.Formability and crash resistance are important mechanical properties that expose the steel to high strain rates.Fracture characteristics of a DP steel at strain rates spanning seven orders of magnitude are investigated using quantitative fractography.The DP steel investigated in this study is comprised of a continuous matrix of martensite with interspersed ferrite islands.The data reveal that the flow stress, uniform strain, and ductility are substantially higher at the higher strain rates.Quantitative fractography, employed to understand the fracture characteristics, shows an increase in the extent of ductile fracture at high strain rates.In this presentation, the results demonstrating high strain rates facilitating dimpled ductile fracture and/or increased resistance to faceted fracture are discussed.
Download or read book Proceedings of the 14th International Conference on the Technology of Plasticity Current Trends in the Technology of Plasticity written by Katia Mocellin and published by Springer Nature. This book was released on 2023-09-19 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of metal forming, as presented by leading international researchers and engineers at the 14th International Conference on Technology of Plasticity (ICTP), held in Mandelieu-La Napoule, France on September 24-29, 2023. It covers a diverse range of topics such as manufacturing processes & equipment, materials behavior and characterization, microstructure design by forming, surfaces & interfaces, control & optimization, green / sustainable metal forming technologies, digitalization & AI in metal forming, multi-material processing, agile / flexible metal forming processes, forming of non-metallic materials, micro-forming and luxury applications. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Dynamic Behavior of Materials written by Mikko Hokka and published by Elsevier. This book was released on 2023-11-21 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials: Fundamentals, Material Models, and Microstructure Effects provides readers with the essential knowledge and tools necessary to determine best practice design, modeling, simulation and application strategies for a variety of materials while also covering the fundamentals of how material properties and behavior are affected by material structure and high strain rates. The book examines the relationships between material microstructure and consequent mechanical properties, enabling the development of materials with improved performance and more effective design of parts and components for high-rate applications. Sections cover the fundamentals of dynamic material behavior, with chapters studying dynamic elasticity and wave propagation, dynamic plasticity of crystalline materials, ductile fracture, brittle fracture, adiabatic heating and strain localization, response to shock loading, various material characterization methods, such as the Hopkinson Bar Technique, the Taylor Impact Experiment, different shock loading experiments, recent advances in dynamic material behavior, the dynamic behaviors of nanocrystalline materials, bulk metallic glasses, additively manufactured materials, ceramics, concrete and concrete-reinforced materials, geomaterials, polymers, composites, and biomaterials, and much more. Focuses on the relationship between material microstructure and resulting mechanical responses Covers the fundamentals, characterization methods, modeling techniques, applications and recent advances of the dynamic behavior of a broad array of materials Includes insights into manufacturing and processing techniques that enable more effective material design and application
Download or read book Ductile Fracture in High Strength Steels Under Plane Strain Conditions written by Dale A. Meyn and published by . This book was released on 1962 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Science of Armour Materials written by Ian Crouch and published by Woodhead Publishing. This book was released on 2016-09-21 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science of Armour Materials comprehensively covers the range of armor materials from steels and light alloys, through glasses and ceramics, to fibers, textiles, and protective apparel. The book also discusses aspects of analytical and numerical modeling, as well as laboratory-based high-strain rate testing and ballistic testing methodologies. Each chapter is written from an international perspective, including reviews of the current global literature, and incorporates case studies that focus upon real life applications, research outcomes, and lessons learned. The threat spectrum is restricted to small arms ammunition, high velocity fragments, and stab and spike attacks, as well as blast loadings. Features input from an editor who is an expert in his field: Dr. Ian Crouch, the author of over 80 publications in his field, with three patents to his name Provides systematic and comprehensive coverage of armor materials, modeling, and testing Offers a cross-disciplinary approach that brings together expertise in materials science and defense engineering Discusses aspects of analytical and numerical modeling, as well as laboratory-based high-strain rate testing and ballistic testing methodologies
Download or read book Superalloys written by Elihu F. Bradley and published by ASM International(OH). This book was released on 1988 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Material Forming written by Anna Carla Araujo and published by Materials Research Forum LLC. This book was released on 2024-05-20 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: These ESAFORM 2024 conference proceedings cover a wide range of topics: Additive manufacturing; Composites forming processes; Extrusion and drawing; Forging and rolling; Formability of metallic materials; Friction and wear in metal forming; Incremental and sheet metal forming; Innovative joining by forming technologies; Optimization and inverse analysis in forming; Machining, Cutting and severe plastic deformation processes; Material behavior modelling; New and advanced numerical strategies for material forming; Non-conventional processes; Polymer processing and thermomechanical properties; Sustainability on material forming. Keywords: WAAM Technology, Fused deposition Modeling (FDM), Fiber Composite Printers, Ultrasonic Powder Atomization, Finite Element Modeling (FEM), Laser Powder Bed Fusion (L-PBF), Rapid Prototyping in Additive Manufacturing, Directed Energy Deposition (DED), GTAW Droplet Deposition, Deep Learning, Thermoplastic Pultrusion, Textile Reinforcements, Thermoforming Simulation, New Sustainable Materials, Non-Crimp Fabrics, CFRP Scraps, PEEK Composites, Thermoplastic Sheets, Flax/PP Composites.
Download or read book Advances in Experimental Impact Mechanics written by Bo Song and published by Elsevier. This book was released on 2021-08-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizing the latest advances in experimental impact mechanics, this book provides cutting-edge techniques and methods for designing, executing, analyzing, and interpreting the results of experiments involving the dynamic responses of materials and structures. It provides tailored guidelines and solutions for specific applications and materials, covering topics such as dynamic characterization of metallic materials, fiber-like materials, low-impedance materials, concrete and more. Damage evolution and constitutive behavior of materials under impact loading, one-dimensional strain loading, intermediate and high strain rates, and other environmental conditions are discussed, as are techniques using high temperature testing and miniature Kolsky bars. Provides cutting-edge techniques and methods for designing, executing, analyzing, and interpreting the results of experimental impact mechanics Covers experimental guidelines and solutions for an array of different materials, conditions, and applications Enables readers to quickly design and perform their own experiments and properly interpret the results Looks at application-specific post-test analysis
Download or read book Aluminum Lithium Alloys written by N Eswara Prasad and published by Butterworth-Heinemann. This book was released on 2013-09-20 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because lithium is the least dense elemental metal, materials scientists and engineers have been working for decades to develop a commercially viable aluminum-lithium (Al-Li) alloy that would be even lighter and stiffer than other aluminum alloys. The first two generations of Al-Li alloys tended to suffer from several problems, including poor ductility and fracture toughness; unreliable properties, fatigue and fracture resistance; and unreliable corrosion resistance. Now, new third generation Al-Li alloys with significantly reduced lithium content and other improvements are promising a revival for Al-Li applications in modern aircraft and aerospace vehicles. Over the last few years, these newer Al-Li alloys have attracted increasing global interest for widespread applications in the aerospace industry largely because of soaring fuel costs and the development of a new generation of civil and military aircraft. This contributed book, featuring many of the top researchers in the field, is the first up-to-date international reference for Al-Li material research, alloy development, structural design and aerospace systems engineering. Provides a complete treatment of the new generation of low-density AL-Li alloys, including microstructure, mechanical behavoir, processing and applications Covers the history of earlier generation AL-Li alloys, their basic problems, why they were never widely used, and why the new third generation Al-Li alloys could eventually replace not only traditional aluminum alloys but more expensive composite materials Contains two full chapters devoted to applications in the aircraft and aerospace fields, where the lighter, stronger Al-Li alloys mean better performing, more fuel-efficient aircraft
Download or read book Dynamic Behavior of Materials Volume 1 written by Veronica Eliasson and published by Springer Nature. This book was released on with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Studies in Large Plastic Flow and Fracture written by Percy Williams Bridgman and published by Cambridge : Harvard University Press. This book was released on 1964 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NUMISHEET 2022 written by Kaan Inal and published by Springer Nature. This book was released on 2022-06-30 with total page 941 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NUMISHEET conference series is the most significant international conference on the area of the numerical simulation of sheet metal forming processes. It gathers the most prominent experts in numerical methods in sheet forming processes and is an outstanding forum for the exchange of ideas and for the discussion of technologies related to sheet metal forming processes. Topics covered in this volume include but are not limited to the following: Materials Modeling and Experimental Testing Methods Friction and Contact Formability, Necking, and Fracture Instabilities and Surface Defects Fracture and Damage Numerical Methods Springback Incremental Sheet Forming Roll Forming Innovative Forming Methods Product and Process Design and Optimization
Download or read book Mechanics of Sheet Metal Forming written by Z. Marciniak and published by Butterworth-Heinemann. This book was released on 2002-06-04 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material properties -- Sheet deformation processes -- Deformation of sheet in plane stress -- Simplified stamping analysis -- Load instability and tearing -- Bending of sheet -- Simplified analysis of circular shells -- Cylindrical deep drawing -- Stretching circular shells -- Combined bending and tension of sheet -- Hydroforming.
Download or read book Ductile Fracture After Complex Loading Histories written by Stephane Jean Marie Marcadet and published by . This book was released on 2015 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: In engineering practice, sheet metal often fails after complex strain paths that deviate substantially from the widely studied proportional loading paths. Different from previous works on the ductile fracture of sheet metal, this thesis research addresses the experimental and modeling issues related to the crack initiation in advanced high strength steels after loading direction reversal. The main outcome of the present work is a fracture initiation model for proportional and non-proportional loading. The starting point of this thesis is a first chapter on the development of a micromechanically-motivated ductile fracture initiation model for metals for proportional loading. Its formulation is based on the assumption that the onset of fracture is imminent with the formation of a primary or secondary band of localization. Motivated by the results from a thorough unit cell analysis, it is assumed that fracture initiates after proportional loading if the linear combination of the Hosford equivalent stress and the normal stress acting on the plane of maximum shear reaches a critical value. A comprehensive fracture initiation model is then obtained after transforming the localization criterion from the stress space to the space of equivalent plastic strain, stress triaxiality and Lode angle parameter using the material's isotropic hardening law. Experimental results are presented for three different advanced high strength steels. For each material, the onset of fracture is characterized for five distinct stress states, including butterfly shear, notched tension, tension with a central hole, and punch experiments. The comparison of model predictions with the experimental results demonstrates that the proposed Hosford-Coulomb model can predict with satisfactory accuracy the instant of ductile fracture initiation in advanced high strength steels. In a subsequent chapter, experimental methods are developed to perform compression tension experiments. In addition, a finite strain constitutive model is proposed combining a Swift-Voce isotropic hardening law with two Frederick-Armstrong kinematic hardening rules and a Yoshida-Uemori type of hardening stagnation approach. The plasticity model parameters are identified from uniaxial tension-compression stress-strain curve measurements and finite element simulations of compression-tension experiments on notched specimens. The model predictions are validated through comparison with experimentally-measured load-displacement curves up to the onset of fracture, local surface strain measurements and longitudinal thickness profiles. The extracted loading paths to fracture show a significant increase in ductility as a function of the compressive pre-strain. The Hosford-Coulomb model is therefore integrated into a non-linear damage indicator modeling framework to provide a phenomenological description of the experimental results for monotonic and reverse loading. Another extension of the modeling framework is presented in a third chapter inspired by the results from loss of ellipticity analysis. It is demonstrated that the Hosford-Coulomb model can also be expressed in terms of a stress-state dependent critical hardening rate. Moreover, it is shown that the critical hardening rate approach provides accurate predictions of the instant of fracture initiation for both proportional and non-proportional loading conditions. Enhancements of the finite strain constitutive model are also proposed to enable a fast identification of all model parameters. The plasticity model parameters are identified from stress-strain curve measurements from shear loading reversal on specimens with a uniform thickness reduced gage section. The model is used to estimate the local strain and stress fields in fracture experiments after shear reversal. The extracted loading paths to fracture show a significant increase in ductility as a function of the strain at shear reversal, a feature that is readily predicted by the prosed critical hardening rate model.
Download or read book Advanced High Strength Steel And Press Hardening Proceedings Of The 2nd International Conference Ichsu2015 written by Yisheng Zhang and published by World Scientific. This book was released on 2016-03-11 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings brings together one hundred and ten selected papers presented at the 2nd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU2015), which was held in Changsha, China, during October 15-18, 2015.To satisfy the increasingly urgent requirement of reducing the weight of vehicle structures and increasing passenger safety, ICHSU2015 provided an excellent international platform for researchers to share their knowledge and results in theory, methodology and applications of advanced high strength steel and press hardening technology.This conference aroused great interests and attentions from domestic and foreign researchers in hot stamping field. Experts in this field from Australia, China, Germany and Sweden, contributed to the collection of research results and developments. The papers cover almost all the current topics of advanced high strength steel and press hardening technology.
Download or read book Effects of Strain Rate and Temperature on the Mechanical Behavior of Advanced High Strength Steels written by Mikko Hokka and published by . This book was released on 2008 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
