Download or read book Effect of Radiation Induced Segregation on Precipitate Stability and Swelling in Irradiated Alloys written by VA. Pechenkin and published by . This book was released on 1999 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: The radiation-induced segregation of alloy components near point defect sinks with a particular attention to Fe-Cr-Ni based alloys is analyzed. The influence of point defect generation rate on temperature ranges of stability for radiation-retarded M23C6 and radiation-induced Ni3Si precipitates in austenitic stainless steels is considered. A method of calculation of steady-state segregation-induced bias in irradiated binary alloys, taking into account Kirkendall forces and drift forces caused by point defect migration and formation energy gradients near sinks, is proposed. Contributions of various forces to the bias in Fe-Cr-Ni and V-Fe alloys are evaluated. The effect of void-precipitate association on swelling is analyzed. The radiation-induced segregation of components and segregation-induced bias for motionless and moving grain boundaries in a Fe-Cr-Ni alloy are calculated by solving the set of coupled diffusion equations for component and point defect concentrations.

Download or read book Damage rate Gradient Effects on Radiation induced Segregation and Phase Stability in Irradiated Alloys written by and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent studies have shown that significant compositional redistribution in irradiated alloys can be induced by the gradients in the atomic displacement rates resulting from nonuniform defect production, in addition to the commonly-observed solute segregation at defect sinks. This process gives rise to complex local phase transformations during light-ion bombardment or irradiation with focused electron beams in the high-voltage electron microscope. Results of our theoretical and experimental investigations of this phenomenon in Ni-Al and Ni-Si are discussed. The implications of the observed effect in a number of areas of materials science are assessed.

Download or read book Effects of Radiation on Materials written by R. K. Nanstad and published by ASTM International. This book was released on 1999 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Radiation on Materials written by Arvind S. Kumar and published by ASTM International. This book was released on 1994 with total page 1319 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radiation induced Segregation and Precipitation in Ion irradiated Molybdenum rhenium Alloys written by Robert Alan Erck and published by . This book was released on 1988 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Radiation on Materials written by Stan T. Rosinski and published by ASTM International. This book was released on 2001 with total page 879 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characterisation of Radiation Damage by Transmission Electron Microscopy written by M.L Jenkins and published by CRC Press. This book was released on 2000-11-21 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization of Radiation Damage by Transmission Electron Microscopy details the electron microscopy methods used to investigate complex and fine-scale microstructures, such as those produced by fast-particle irradiation of metals or ion implantation of semiconductors. The book focuses on the methods used to characterize small point-defect clus

Download or read book Effects of Radiation on Materials written by D. S. Gelles and published by ASTM International. This book was released on 1996 with total page 1169 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Phase Transformations During Irradiation written by Frank V. Nolfi and published by . This book was released on 1983 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.

Download or read book Effects of Radiation on Materials written by Roger E. Stoller and published by ASTM International. This book was released on 1992 with total page 1315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium held in Nashville, Tennessee, June 1990. Almost two-thirds of these 91 papers are authored by researchers outside of the US (including information on research in the former USSR, Japan, and Europe). Topics include: current commercial power reactor systems; microstructural characterization

Download or read book Phase Stability During Irradiation written by J. R. Holland and published by . This book was released on 1981 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Radiation on Materials written by N. H. Packan and published by ASTM International. This book was released on 1990 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Effects of Radiation on Materials: Fourteenth International Symposium was presented at Andover, MA, June 1988. The symposium was sponsored by ASTM Committee E-10 on Nuclear Technology and Applications. The papers from the first three days of the symposium appear in the two volumes of this publication. Volume I encompasses radiation damage- induced microstructures; point defect, solute, and gas atom effects; atomic-level measurement techniques; and applications of theory. Volume II includes mechanical behavior, all papers dealing with pressure-vessel steels, breeder reactor components, dosimetry, and nuclear fuels. The fourth day of the symposium was devoted to the single topic of reduced-activation materials (see TK9204). The two volumes are separately sold at $127 and $128 respectively; each is independently indexed. Annotation copyrighted by Book News, Inc., Portland, OR.

Download or read book Effects of Radiation on Materials written by H. R. Brager and published by ASTM International. This book was released on 1982 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.

Download or read book Effects of Radiation on Materials written by and published by ASTM International. This book was released on 1981 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radiation Processes in Crystal Solid Solutions written by Gennadi Gladyshev and published by Bentham Science Publishers. This book was released on 2012-03-31 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiation Processes In Crystal Solid Solutions is a monograph explaining processes occurring in two classes of crystal solids (metal alloys and doped alkali halides) under irradiation by various types of radiation (alpha, beta, gamma, X-radiations, ions). While metal alloys may differ in high radiation stability, solid solutions based on alkali halides are very radiation-sensitive materials. Radiation defect production mechanisms, intrinsic and extrinsic radiation defects, a role of complexes an impurity-radiation defect which explain distinction in radiating stability of the specified classes of solid solutions are discussed in this e-book. To describe radiation induced phase transformations, two approaches are highlighted: kinetic and thermodynamic. This e-book also includes research on the effect of small radiation doses in a structurally solid phase state of a solution along with a semi-quantitative estimation of radiation effects with respect to temperature changes. This e-book should be a useful reference for advanced readers interested in the physics of radiation and solid state physics.

Download or read book Materials for Nuclear Reactor Core Applications written by and published by Thomas Telford Publishing. This book was released on 1987 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of an international conference held in Bristol on 27-29 October 1987.