Download or read book Particulate Carbon written by Donald Siegla and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of the symposium, "Particulate Carbon: Formation During Combustion", held at the General Motors Research Laboratories on October 15 and 16, 1980, was to discuss fundamental aspects of soot formation and oxidation in combustion systems and to stimulate new research by extensive interactions among the participants. This book contains lhe papers and discussions of that symposium, the 26th in an annual series covering many different disciplines which are timely and of interest to both General Motors and the technical community at large. The subject of this symposium has considerable relevance for man in his effort to control and preserve his environment. Emission of particulate carbon into the atmos phere from combustion sources is of concern to scientists and laymen alike. The hope of reducing this emission clearly requires an understanding of its formation during the combustion process, itself an area of considerable long-term research interest. It is our hope that this symposium has served to summarize what is known so that what remains to be learned can be pursued with greater vigor.
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Nanoscale Materials written by Luis M. Liz-Marzán and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organized nanoassemblies of inorganic nanoparticles and organic molecules are building blocks of nanodevices, whether they are designed to perform molecular level computing, sense the environment or improve the catalytic properties of a material. The key to creation of these hybrid nanostructures lies in understanding the chemistry at a fundamental level. This book serves as a reference book for researchers by providing fundamental understanding of many nanoscopic materials.
Download or read book Carbon Based Material for Environmental Protection and Remediation written by Mattia Bartoli and published by BoD – Books on Demand. This book was released on 2020-08-19 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Material for Environmental Protection and Remediation presents an overview of carbon-based technologies and processes, and examines their usefulness and efficiency for environmental preservation and remediation. Chapters cover topics ranging from pollutants removal to new processes in materials science. Written for interested readers with strong scientific and technological backgrounds, this book will appeal to scientific advisors at private companies, academics, and graduate students.
Download or read book Handbook Of Advanced Methods And Processes In Oxidation Catalysis From Laboratory To Industry written by Daniel Duprez and published by World Scientific. This book was released on 2014-07-24 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the most recent developments in both total oxidation and combustion and also in selective oxidation. For each topic, fundamental aspects are paralleled with industrial applications. The book covers oxidation catalysis, one of the major areas of industrial chemistry, outlining recent achievements, current challenges and future opportunities. One distinguishing feature of the book is the selection of arguments which are emblematic of current trends in the chemical industry, such as miniaturization, use of alternative, greener oxidants, and innovative systems for pollutant abatement. Topics outlined are described in terms of both catalyst and reaction chemistry, and also reactor and process technology.
Download or read book Catalysis by Ceria and Related Materials written by Alessandro Trovarelli and published by . This book was released on 2013 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book follows the 2002 edition of Catalysis by Ceria and Related Materials, which was the first book entirely devoted to ceria and its catalytic properties. It covers fundamental and applied aspects of the latest advances in ceria-based materials with a special focus on structural, redox and catalytic features of nano-engineered systems. In addition, it presents recent advances of traditional large-scale applications of ceria in catalysis, such as the treatment of emissions from mobile sources (including diesel and gasoline engines).
Download or read book Coal Gasification and Its Applications written by David A. Bell and published by William Andrew. This book was released on 2010-12-08 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Skyrocketing energy costs have spurred renewed interest in coal gasification. Currently available information on this subject needs to be updated, however, and focused on specific coals and end products. For example, carbon capture and sequestration, previously given little attention, now has a prominent role in coal conversion processes.This book approaches coal gasification and related technologies from a process engineering point of view, with topics chosen to aid the process engineer who is interested in a complete, coal-to-products system. It provides a perspective for engineers and scientists who analyze and improve components of coal conversion processes.The first topic describes the nature and availability of coal. Next, the fundamentals of gasification are described, followed by a description of gasification technologies and gas cleaning processes. The conversion of syngas to electricity, fuels and chemicals is then discussed. Finally, process economics are covered. Emphasis is given to the selection of gasification technology based on the type of coal fed to the gasifier and desired end product: E.g., lower temperature gasifiers produce substantial quantities of methane, which is undesirable in an ammonia synthesis feed. This book also reviews gasification kinetics which is informed by recent papers and process design studies by the US Department of Energy and other groups, and also largely ignored by other gasification books.• Approaches coal gasification and related technologies from a process engineering point of view, providing a perspective for engineers and scientists who analyze and improve components of coal conversion processes • Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes • Emphasizes the importance of the coal types fed to the gasifier and desired end products • Covers gasification kinetics, which was largely ignored by other gasification books - Provides a perspective for engineers and scientists who analyze and improve components of the coal conversion processes - Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes - Covers gasification kinetics, which was largely ignored by other gasification books
Download or read book Cement Production Technology written by Anjan Kumar Chatterjee and published by CRC Press. This book was released on 2018-04-27 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an outcome of the author’s active professional involvement in research, manufacture and consultancy in the field of cement chemistry and process engineering. This multidisciplinary title on cement production technology covers the entire process spectrum of cement production, starting from extraction and winning of natural raw materials to the finished products including the environmental impacts and research trends. The book has an overtone of practice supported by the back-up principles.
Download or read book Soot Formation in Combustion written by Henning Bockhorn and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soot Formation in Combustion represents an up-to-date overview. The contributions trace back to the 1991 Heidelberg symposium entitled "Mechanism and Models of Soot Formation" and have all been reedited by Prof. Bockhorn in close contact with the original authors. The book gives an easy introduction to the field for newcomers, and provides detailed treatments for the specialists. The following list of contents illustrates the topics under review:
Download or read book Combined and Hybrid Adsorbents written by José M. Loureiro and published by Springer Science & Business Media. This book was released on 2006-10-03 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book follows up an Advanced Research Workshop dedicated to the subject of adsorption. It presents an up-to-date review of the latest achievements in the synthesis, characterization and applications of hybrid organic-inorganic materials and of carbon and combined adsorbents. The modeling of the adsorption process, including the simulation of carbon masks used for both civil and military protection purposes is also addressed. Includes applications in environmental, military and post-disaster situations.
Download or read book Small Scale Synthesis of Laboratory Reagents with Reaction Modeling written by Leonid Lerner and published by CRC Press. This book was released on 2011-02-16 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The in-lab preparation of certain chemical reagents provides a number of advantages over purchasing various commercially prepared samples. This is especially true in isolated regions where acquiring the necessary substances from overseas can cause undue delay and inconvenience due to restrictions on the transportation of hazardous chemicals. An inv
Download or read book Sustainable Strategies for the Upgrading of Natural Gas Fundamentals Challenges and Opportunities written by E.G. Derouane and published by Springer Science & Business Media. This book was released on 2005-06-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy and feedstock materials for the chemical industry are in increasing demand and, with constraints related to the availability and use of oil, the energy and chemical industry is undergoing considerable changes. In recent years, major restructuring has occurred in the oil, petrochemical, and chemical industry, with increasing attention devoted to the use of natural gas, methane in particular, as a chemical feedstock rather than just as a fuel. The conversion of remote natural gas into liquid fuels or other transportable chemicals is a challenge to industrial catalysis. Few processes exist so far with the major ones involving the conversion of natural gas to synthesis gas by steam reforming, CO2 reforming, or partial oxidation, followed by the syntheses of methanol, hydrocarbons (Fischer-Tropsch synthesis), or ammonia. In this book, a comprehensive overview of the field of processing natural gas is given, through a series of chapters written by leading scientists and engineers in the field. New developments are discussed and current work relevant to the area is shown by a series of recent works by researchers working in this and related fields.
Download or read book Advances in Bioprocess Engineering and Technology written by Doraiswami Ramkrishna and published by Springer Nature. This book was released on 2020-09-29 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select peer-reviewed proceedings of the International Conference on Advances in Bioprocess Engineering and Technology (ICABET 2020). The book covers all aspects of bioprocesses, especially related to fermentation technology, food technology, environmental biotechnology, and sustainable energy. Along with this primary theme, the focus is on recent advances in bioprocessing research such as biosensors, micro-reactors, novel separation techniques, bioprocess control, bio-safety, advanced techniques for waste to wealth generation, and nanobiotechnology. This contents are divided according to the major themes of the conference: (i) Fermentation Technology and Bioreactor, (ii) Food Pharmaceuticals and Health care, (iii) Environment and Agriculture, and (iv) Sustainable Energy. This book is intended to help students, researchers, and industry professionals acquire knowledge on innovative technologies and recent advancements in the field of bioprocess engineering and technology.
Download or read book Production of Biofuels and Chemicals with Pyrolysis written by Zhen Fang and published by Springer Nature. This book was released on 2020-10-27 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of studies on state-of-art techniques for converting biomass to chemical products by means of pyrolysis, which are widely applicable to the valorization of biomass. In addition to discussing the fundamentals and mechanisms for producing bio-oils, chemicals, gases and biochar using pyrolysis, it outlines key reaction parameters and reactor configurations for various types of biomass. Written by leading experts and providing a broad range of perspectives on cutting-edge applications, the book is a comprehensive reference guide for academic researchers and industrial engineers in the fields of natural renewable materials, biorefinery of lignocellulose, biofuels, and environmental engineering, and a valuable resource for university students in the fields of chemical engineering, material science and environmental engineering.
Download or read book Medicinal Chemistry and Pharmacological Potential of Fullerenes and Carbon Nanotubes written by Franco Cataldo and published by Springer Science & Business Media. This book was released on 2008-09-08 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fullerenes and nanotubes are two classes of carbon structures or allotropes, which were discovered about 17 years ago. Since that time, many chemical derivatives have been synthesized using fullerenes and nanotubes as building blocks. Particularly promising was the theory that the chemical properties of fullerenes, and certain derivatives, made them likely candidates for anticancer drugs, inhibitors of viruses such as HIV, or even as anti-bacterials. Their cyctotoxicity can also be controlled by specific circumstances. In addition, the funtionalization of nanotubes has not only produced relatively simple derivatives, but also complex hybrids with biological macromolecules, which show unique supramolecular architecture and which are promising in many medical applications. The application of fullerenes and nanotubes in medicine is at the frontier of our knowledge, thus the work in this field represents the basis for future novel developments.
Download or read book Organic Trace Analysis written by Reinhard Nießner and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-08-07 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Organic Trace Analysis" presents the basics of trace analysis, from sample preparation to the measurement: Students are introduced to statistical evaluation, quality control technologies, sampling and preparation of organic traces, as well as to enrichment and separation of samples. Spectroscopic techniques as chromatography, capillary electrophoresis, mass spectrometry, and receptor-based bioanalysis are presented in detail.
Download or read book The Role of Catalysis for the Sustainable Production of Bio fuels and Bio chemicals written by Kostas Triantafyllidis and published by Newnes. This book was released on 2013-03-19 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Role of Catalysis for the Sustainable Production of Bio-fuels and Bio-chemicals describes the importance of catalysis for the sustainable production of biofuels and biochemicals, focused primarily on the state-of-the-art catalysts and catalytic processes expected to play a decisive role in the "green" production of fuels and chemicals from biomass. In addition, the book includes general elements regarding the entire chain of biomass production, conversion, environment, economy, and life-cycle assessment. Very few books are available on catalysis in production schemes using biomass or its primary conversion products, such as bio-oil and lignin. This book fills that gap with detailed discussions of: - Catalytic pyrolysis of lignocellulosic biomass - Hybrid biogasoline by co-processing in FCC units - Fischer-Tropsch synthesis to biofuels (biomass-to-liquid process) - Steam reforming of bio-oils to hydrogen With energy prices rapidly rising, environmental concerns growing, and regulatory apparatus evolving, this book is a resource with tutorial, research, and technological value for chemists, chemical engineers, policymakers, and students. - Includes catalytic reaction mechanism schemes and gives a clear understanding of catalytic processes - Includes flow diagrams of bench-, pilot- and industrial-scale catalytic processing units and demonstrates the various process technologies involved, enabling easy selection of the best process - Incorporates many tables, enabling easy comparison of data based on a critical review of the available literature
