Download or read book Effect of Gloves on the Transmission of Vibration to the Hand written by Sylviane J. Villon and published by . This book was released on 1982 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Transmission Characteristics and Grip Strength Preservation and Anti vibration Gloves written by Karim Hamouda and published by . This book was released on 2016 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exposure to hand-transmitted vibration (HTV) arising from operating hand-held power tools has been associated with various health consequences such as vascular, neurological and musculoskeletal disorders of the hand-arm system, which are collectively termed as hand-arm vibration syndrome (HAVS). In order to decrease the effects of HTV, substantial efforts have been made to protect the operator from the vibrating tools and decrease the vibration exposure. One of the convenient means to isolate the hand from the vibrating tool handle is the anti-vibration (AV) glove. These gloves are constructed from different isolation materials, which are capable of reducing the vibration transmitted to the hands. Vibration isolation performance of AV gloves has been widely evaluated based on measurements of vibration transmitted to the palm of the hand following the method recommended in ISO 10819 (2013). The standard does not require the measurement of transmitted vibration at the fingers side, and consider similar vibration isolation performance of the gloves at the palm and the fingers. The standard also does not address the effect of AV gloves on the hand grip strength, which can be a reason for not wearing these gloves by tool operators. This dissertation seeks to develop a finger adapter capable of measuring the transmitted vibration to fingers and assess the AV gloves based on the integrated performance of vibration isolation at palm and fingers as well as the grip strength preservation. Three different finger adapters (a steel ring, a split ring and a Velcro adapter), each instrumented with a tri-axial accelerometer, were developed and assessed to measure the vibration transmitted to the index and the middle fingers. The assessment of the three adapters showed that the Velcro adapter exhibit relatively lower inter-subject variability and yields resonably good agreements with the data reported in a recent study that measured fingers vibration using laser vibrometer. The effectiveness of the Velcro finger adapters was further explored through their ability of generating repeatable and reproducible vibration measurements. Good repeatability was observed from the vibration transmissibility measured during three trials perfromed with bare hand fingers. In the reproducibility tests, the subjects were asked to remove and reinstall the finger adapters between the trials. The assessment results showed that the obtained vibration transmissibility measurements were reproducible within each subject. In order to enhance the understanding of fingers vibration, an investigation was conducted through measurements of vibration transmissibility of four different vibration reducing (VR) gloves at the middle phalanges of index and middle fingers using two Velcro finger adapters. Four male subjects participated in the measurements, which were conducted under the standardized vibration spectrum and the spectra of three different hand tools. Vibration transmissibility of the gloves were also measured at the palm using the standardized palm adapter. The frequency response functions (FRFs) of gloves at the index and middle fingers were utilized to estimate the vibration transmissibility of the gloves under different tool spectra. Only two gloves would be considered as AV gloves, although these showed fingers vibration amplification. The FRF method of estimating fingers vibration responses resulted in reliable prediction of the perfromance for different tools. Furthermore, 12 male subjects participated for assessment of integrated performance of 12 different VR gloves in terms of vibration transmission performance at the palm and fingers, as well as the effect of gloves on the grip strength preservation. The grip strength magnitude was measured using the cylindrical handle utilized in the vibration transmissibility measurements. The overall vibration transmissibility of the gloves at the fingers were obtained using the frequency weighting recommended in the standard and the reported fingers weighting. All the gloves attenuated fingers vibration in the 10–200 Hz frequency range, with exception of only two gloves. At greater frequencies (>200Hz), majority of the gloves amplified the middle finger transmitted vibration, while only a few gloves showed vibration amplification at the index finger. The effect of different frequency weightings on the vibration isolation performance of gloves at the fingers was only evident in the high frequency range (200–1250Hz). Only four gloves passed the standardized screening criteria despite their vibration amplification at the fingers. All the gloves resulted in reduced hand grip strength with only one exception.
Download or read book Development of a Methodology for Integrated Performance Analyses of Anti vibration Gloves for Controlling the Hand transmitted Vibration written by Yumeng Yao and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hand-transmitted vibration (HTV) arising from hand-held power tools has been associated with an array of disorders of the hand-arm system, collectively referred to as the hand-arm vibration syndrome (HAVS). The risk of HAVS among hand-held power tools operators has been related to the nature of HTV exposure and the mechanical coupling of the hand with a tool handle, which is neglected in the current standardized exposure assessment method (ISO 5349, 2001). Anti-vibration (AV) gloves are considered as convenient and effective means to reduce exposure to HTV. The effectiveness of AV gloves is, invariably, assessed on the basis of the handle vibration transmitted to the palm of the hand. The method does not consider the vibration responses of the fingers, which differ significantly from that of the palm. The AV gloves adversely influence the manual dexterity and grip strength of the operators, which are considered as primary factors discouraging the usage of AV gloves. The current standardized method, however, does not consider the loss of dexterity and grip strength caused by wearing these gloves. This thesis proposes a methodology for evaluating the integrated performance of AV gloves, considering the distributed vibration transmission to the palm and fingers through gloves, manual dexterity and grip strength. In order to establish the methodology, independent experiments were designed to quantify each performance measure. Three series of experiments were designed to evaluate vibration responses distributed over the palm and fingers, manual dexterity and grip strength performance of gloves. Each experiment design involved ten different gloves and 15 adult male subjects. Viscoelastic properties of vibration isolation materials used in the AV gloves were also characterized under a constant preload. In the first series, the fine fingers and hand dexterity were investigated using the Two-Hand Turing & Placing Minnesota and ASTM F2010 methods. Subsequently, the handle vibration transmitted to the palm and mid phalanges of the index and middle fingers of the glove hand were measured along the three translational axes using the palm and fingers' adapters, respectively. In the final series, the influence of AV gloves on the operator's grip strength were investigated via direct as well as indirect methods. A flexible thin-film hand sensor was designed and verified for direct measurement of the contact force developed at the rigid as well as flexible hand-handle, and hand-glove interfaces. The activities of four different forearm muscles were also measured via surface electromyography (EMG) under different hand grip forces imposed by the gloved hand.The correlations among the individual performance measures of AV gloves and the material properties were analyzed via Pearson's correlation coefficient, which provided essential knowledge on the roles of design factors and the design guidance. A relationship among the hand grip, push and contact forces imposed on flexible hand-handle was developed via multiple linear regression analysis. The individual measures of AV gloves were also analyzed via two-factor repeated analyses of variance (ANOVA) and multivariate analysis of variance (MANOVA) to evaluate significance of different independent variables such as glove type, test method, frequency range, and hand grip force. The glove type yielded significant effect on all the measures (p0.05). Post-Hoc tests were subsequently conducted via Bonferroni and Tukey HSD (honest significant difference) test for discriminating difference among the gloves. The combination of extensor carpi radialis longus (ECR) and flexor carpi radialis (FCR) muscles activities revealed highest sensitivity to discriminate among gloves and could serve as an effective indirect measure of the grip strength performance. Increasing the glove thickness resulted in improved vibration isolation by the glove but reduced manual dexterity and enhanced muscles activities. Strong correlation was observed between the material stiffness and wh-weighted palm vibration transmissibility in the high frequency range (r0.90), while a weak correlation was evident between the manual dexterity and the wp-weighted fingers' vibration transmissibility. Strong positive correlations were observed among the palm vibration isolation, material properties and material thickness in the 25-1250 Hz frequency range.The results also revealed conflicting glove design requirements imposed by the individual measures. A methodology based on analytical hierarchy process (AHP) is proposed to identify weightings for the conflicting performance measures for the given work condition, classified in accordance with the frequency ranges of predominant vibration (low and high), as defined in ISO-10819 (2013) together with assembly/disassembly tasks. An integrated performance index is identified and applied to rank five different AV gloves with known individual performance measures for identifying the most desirable glove.
Download or read book Measuring and Predicting the Transmission of Vibration Through Gloves to the Hand written by Khairil Anas bin Md Rezali and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Human Response to Vibration written by Neil J. Mansfield and published by CRC Press. This book was released on 2004-10-28 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through continued collaboration and the sharing of ideas, data, and results, the international community of researchers and practitioners has developed an understanding of many facets of the human response to vibration. At a time when the EU is preparing to adopt a directive on health risks arising from occupational exposure to vibration, Human Response to Vibration offers authoritative guidance on this complex subject. Individual chapters in the book examine issues relating to whole-body vibration, hand-arm vibration, and motion sickness. Vibration measurements and standards are also addressed. This book meets the needs of those requiring knowledge of human response to vibration in order to make practical improvements to the physical working environment. Written with the consultant, practitioner, researcher, and student in mind, the text is designed to be an educational tool, a reference, and a stimulus for new ideas for the next generation of specialists.
Download or read book Musculoskeletal Disorders and the Workplace written by Institute of Medicine and published by National Academies Press. This book was released on 2001-05-24 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every year workers' low-back, hand, and arm problems lead to time away from jobs and reduce the nation's economic productivity. The connection of these problems to workplace activities-from carrying boxes to lifting patients to pounding computer keyboards-is the subject of major disagreements among workers, employers, advocacy groups, and researchers. Musculoskeletal Disorders and the Workplace examines the scientific basis for connecting musculoskeletal disorders with the workplace, considering people, job tasks, and work environments. A multidisciplinary panel draws conclusions about the likelihood of causal links and the effectiveness of various intervention strategies. The panel also offers recommendations for what actions can be considered on the basis of current information and for closing information gaps. This book presents the latest information on the prevalence, incidence, and costs of musculoskeletal disorders and identifies factors that influence injury reporting. It reviews the broad scope of evidence: epidemiological studies of physical and psychosocial variables, basic biology, biomechanics, and physical and behavioral responses to stress. Given the magnitude of the problem-approximately 1 million people miss some work each year-and the current trends in workplace practices, this volume will be a must for advocates for workplace health, policy makers, employers, employees, medical professionals, engineers, lawyers, and labor officials.
Download or read book The Effects of a Visco elastic Polymer Glove on Hand arm Vibration Muscle Activity and Comfort During Simulated Power Tool Use written by Ryan Alexander Shivpaul and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prolonged exposure to hand-transmitted vibration (HTV) as a result of power tools can lead to hand-arm vibration syndrome (HAVS). The effectiveness of anti-vibration (AV) gloves for the reduction of hand arm vibration remains unclear. The ability of a glove to attenuate vibration is largely influenced by the material properties and forearm muscle activity during tool use. Visco-elastic polymer (gel-based) and air-bladder AV gloves are the most common options, however the material properties of gel based options have seen little attention. The purpose of this study is to investigate vibration transmissibility, forearm muscle activity and subjective grip dexterity using a variety of gel-based compositions and designs. Participants completed six simulated hand-held power tool tasks. RMS vibration, grip force, muscle activity, and perceived levels of comfort, dexterity, onset of forearm muscle fatigue and impairment of tactile sensation were collected. Vibration attenuation was most effective along the Z axis, with properties such as decreased contact stiffness, as well as increased mass, elasticity and viscosity performing better. Further investigation of visco-elastic polymers using the ISO standardized protocol is needed.
Download or read book Hand arm Vibration written by Great Britain. Health and Safety Executive and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains to employers, health and safety advisors, specialists and occupational health professionals what they need to do to reduce and control the risks form hand-arm vibration (HAV) under the Control of Vibration at Work Regulations 2005. It is divided into colour-coded parts to help readers go directly to the information that is most relevant to them. It replaces Hand-arm vibration (HSG88). Superseded by ISBN 9780717665655
Download or read book Occupational Exposure to Hand arm Vibration written by and published by . This book was released on 1990 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Measurement of Vibration Transmitted by Pneumatic Impact Tools and the Effectiveness of Anti vibration Gloves in Reducing the Hazardous Effects of Hand arm Vibration in the Petrochemical Industry written by Joe George and published by . This book was released on 2007 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Effects on the Hand and Arm in Industry written by A. J. Brammer and published by Wiley-Interscience. This book was released on 1982 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 14th International Conference on Hand Arm Vibration written by Deutsche Gesetzliche Unfallversicherung (DGUV) and published by DGUV/IFA. This book was released on 2019-05-30 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: In May 2019, the Institut für Arbeitsschutz der Deutschen Gesetzlichen Unfallversicherung (IFA) was hosting the 14th International Conference on Hand-Arm-Vibration. The event is organised every four years under the auspices of international expert bodies at changing places. It is aimed at all stakeholders in the subject, whether experts from the occupational safety and health and research communities or management personnel in the areas of manufacture and design. Mechanized manual work is often associated with exposure to vibration that may impact adversely upon the health and well-being of the affected individuals. Besides impairments to comfort and performance, harm to the hand-arm system, possibly permanent, must be prevented as a matter of priority. In a world of work that is becoming more and more complex, combined exposures are also becoming increasingly relevant. What influence does hand-arm vibration have in conjunction with noise or whole-body vibration? What contribution can be made by medicine, diagnostics, epidemiology, measurement technology and prevention to the identification and containment of risks, and better still, to their elimination? What is the role of international regulatory activity in this context? The 14th International Conference on Hand-Arm Vibration aimed to address these and many other questions concerning hand-arm vibration, and to find answers relevant to the field.
Download or read book Fundamentals of Noise and Vibration written by Frank Fahy and published by CRC Press. This book was released on 1998-10-01 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Noise and Vibration is based on the first semester of the postgraduate Masters' course in Sound and Vibration Studies at the Institute of Sound and Vibration Research, at the University of Southampton. The main objective of the course is to provide students with the skills and knowledge required to practise in the field of noise and vibration control technology. Readers do not need prior formal training in acoustics although a basic understanding of mechanics, fluid dynamics and applied mathematics is required. Many of the chapters use examples of models and forms of analysis to illustrate the principles that they introduce. By pointing toward the practical application of these fundamental principles and methods, the book will benefit those wishing to extend their knowledge and understanding of acoustic and vibration technology for professional purposes. Advanced Applications in Acoustucs, Noise and Vibration serves as a companion volume.
Download or read book Transmission of Vibration in the Hand Arm System with Special Reference to Changes in Compression Force and Acceleration written by I. Pyykko and published by . This book was released on 1977 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contemporary Ergonomics and Human Factors 2010 written by Martin Anderson and published by Taylor & Francis. This book was released on 2010-04-06 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles the papers presented at the Annual Conference of the Institute of Ergonomics & Human Factors held in April 2010. It embraces a wide range of issues related to ergonomics, reflecting the name change of the Ergonomics Society to the Institute of Ergonomics & Human Factors.
Download or read book Handbook of Human Vibration written by M. J. Griffin and published by Academic Press. This book was released on 2012-12-02 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today the human body is exposed to vibration not only while traveling but also during leisure and domestic activities and in many occupations. This volume summarizes the current understanding of the many human responses to vibration. Divided into two parts, this book deals with whole-body vibrations and hand-transmitted vibration. In each part the experimental data and appropriate models are presented in detail so that readers can address practical problems. An extensive guide to national and international standards is provided, and a large multidisciplinary glossary of terms assists in understanding the relevant technical and medical jargon. This comprehensive reference volume is accessible to all those interested in human vibration: medical doctors, engineers, lawyers, scientists, and health and safety officials and administrators. LK uses the following bulleted list_ This new text features: An up-to-date statement of current knowledge on human responses to vibration A comprehensive glossary of terms in current use in the fields of vibration and human response An extensive bibliography and guide to national and international standards
Download or read book Contemporary Ergonomics 1998 written by Margaret Hanson and published by CRC Press. This book was released on 2003-08-29 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series provides a fast track for publication of suitable papers from international contributors. The papers are chosen on the basis of abstracts submitted to a selection pannel in the autumn prior to the conference. IN addition to mainstream ergonomists and human factor specialists, contemporary ergonomicswill appeal to all those who have an interest in peoples interaction with their working and leisure environment including: designers, manufacturing and production engineers, health and safety specialists, organisational, applied and engineering psychologists.
