EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Effect of Accelerated Corrosion on the Bond Strength of Corrosion Resistant Reinforcing Bars Embedded in Concrete

Download or read book Effect of Accelerated Corrosion on the Bond Strength of Corrosion Resistant Reinforcing Bars Embedded in Concrete written by Sourav Khatua and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of steel reinforcing bars embedded in concrete applications is a major problem all over the world. Effect of corrosion causes metal loss at sections, cracks in the concrete surrounding the reinforcing steel, spalling of cover concrete also leads to de-bonding of reinforcing bar from the concrete. Corrosion cracks in the surrounding concrete leads to loss in bond strength and finally reduce the structural strength and service life of the structure. This problem is consistently observed in structural slab bridges that are exposed to deicing salts during the winters. In the era of 1980's, black convention steel was replaced with epoxy-coated bars as a solution to prevent corrosion in bridge decks. However the advantage of using epoxy coated bars is still uncertain as the bond strength of these type of bars is a concern. Several researchers in the past have highlighted deleterious effect of corrosion on epoxy-coated bars that are damaged during handling. It is necessary to study the use of alternative reinforcing bars as means of corrosion protection in bridge deck applications. There are several corrosion resistant bars that are readily available in the market, but performance of these bars under accelerated corrosion conditions is still unclear. Six different types of bars which include, conventional black bars, epoxy-coated bars, hot dipped galvanizing bars, continuously galvanized bars, stainless steel bars and MMFX bars were studied in this thesis. The objective of this study is to investigate the effect of accelerated corrosion on bond strength of concrete. The bond between concrete and reinforcement bars play a major role in transfer of stresses from concrete to steel. However, corrosion weakens this bond, resulting in weakening of the Reinforced Concrete member. So, it was necessary to investigate the performance of CRR (Corrosion Resistant Bars) embedded in concrete and s ubjected to accelerated corrosion. The effect of addition of polypropylene fibers on the bond strength was studied. A total of 48 prism specimens were cast with CRR bars including the ones with fibers, of which 24 specimens were subjected to accelerated corrosion. The prisms were 6-inch cube with a reinforcing bar at the centre of each specimen. The embedment length of the bar was 2.5 inches at the mid-height of the section. An electrochemical cell was adopted by placing the specimens in a tank containing 5% salt solution with stainless steel cathode surrounding the specimen. The circuit was completed by connecting the cathode and the reinforcing bar to an external power supply. The specimens were subjected to accelerated corrosion for total of 21 days which includes a two-day wetting and one day drying cycle. Impressed current of 0.02A, calculated using Faraday's law to achieve 5% corrosion damage was supplied during the wetting cycle using external power source. The corroded specimens were then tested to investigate the loss of bond strength due to corrosion and capture any improvement in bond strength using polypropylene fibers. It was observed that, corrosion of bars showed serious bond loss leading to reduced pull-out strength with larger slip of the bars relative to the embedded concrete prisms. Addition of polypropylene fibers showed an improvement in the overall performance of the corroded specimens by increasing the load capacity, reducing slip and improving failure mode from brittle to more ductile mode, compared to un-corroded specimens..

Book Corrosion Protection of Reinforcing Steels

Download or read book Corrosion Protection of Reinforcing Steels written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2009-01-01 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has long been recognised that corrosion of steel is extremely costly and affects many industry sectors, including concrete construction. The cost of corrosion of steel reinforcement within concrete is estimated at many billions of dollars worldwide. The corrosion of steel reinforcement represents a deterioration of the steel which in turn detrimentally affects its performance and therefore that of the concrete element within which it has been cast. A great amount of work has been undertaken over the years concerning the prevention of corrosion of steel, including the application of coatings, which has included the study of the process of corrosion itself, the properties of reinforcing steels and their resistance to corrosion as well as the design of structures and the construction process. The objective of fib Bulletin 49 is to provide readers with an appreciation of the principles of corrosion of reinforcing steel embedded in concrete and to describe the behaviour of particular steels and their coatings as used to combat the effects of such corrosion. These include galvanised reinforcement, epoxy coated reinforcement, and stainless reinforcing steel. It also provides information on the relative costs of the materials and products which it covers. It does not deal with structure design or the process of construction or with the post-construction phase of structure management including repair. It is hoped that it will nevertheless increase the understanding of readers in the process of corrosion of reinforcing steels and the ability of key materials and processes to reduce its harmful effects.

Book Corrosion of Reinforcing Steel in Concrete

Download or read book Corrosion of Reinforcing Steel in Concrete written by D. E. Tonini and published by ASTM International. This book was released on 1980 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Corrosion of Reinforcing Steel in Concrete

Download or read book Corrosion of Reinforcing Steel in Concrete written by J. Tonini and published by ASTM International. This book was released on 1980 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Report No  FHWA RD

    Book Details:
  • Author : United States. Federal Highway Administration. Offices of Research and Development
  • Publisher :
  • Release : 1974
  • ISBN :
  • Pages : 98 pages

Download or read book Report No FHWA RD written by United States. Federal Highway Administration. Offices of Research and Development and published by . This book was released on 1974 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Bond of Reinforcement in Concrete

Download or read book Bond of Reinforcement in Concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2000-01-01 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In 1993, the CEB Commission 2 Material and Behavior Modelling established the Task Group 2.5 Bond Models. It's terms of reference were ... to write a state-of-art report concerning bond of reinforcement in concrete and later recommend how the knowledge could be applied in practice (Model Code like text proposal)... {This work} covers the first part ... the state-of-art report."--Pref.

Book Corrosion Effects on Bond Strength in Reinforced Concrete

Download or read book Corrosion Effects on Bond Strength in Reinforced Concrete written by Kyle David Stanish and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Advances in Geotechnics and Structural Engineering

Download or read book Advances in Geotechnics and Structural Engineering written by Sanjay Kumar Shukla and published by Springer Nature. This book was released on 2021-04-29 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Trends and Recent Advances in Civil Engineering (TRACE 2020). The book focuses on the latest research developments in structural engineering, structural health monitoring, rehabilitation and retrofitting of structures, geotechnical engineering, and earthquake-resistant structures. The contents also cover the latest innovations in building repair and maintenance, and sustainable materials for rehabilitation and retrofitting. The contents of this book are useful for students, researchers, and professionals working in structural engineering and allied areas.

Book Nonmetallic Coatings for Concrete Reinforcing Bars

Download or read book Nonmetallic Coatings for Concrete Reinforcing Bars written by James R. Clifton and published by . This book was released on 1975 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Corrosion of Reinforcement in Concrete

Download or read book Corrosion of Reinforcement in Concrete written by M Raupach and published by Woodhead Publishing. This book was released on 2014-01-23 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the widespread use of reinforced concrete in infrastructure, understanding the corrosion of this material is of major importance. As a result there has been a wealth of research into catalysts, inhibitors and effective means of monitoring the rate of corrosion. Corrosion of reinforcement in concrete: mechanisms, monitoring, inhibitors and rehabilitation techniques summarises some of the most significant research and its implications.The book begins by reviewing findings from various experiments designed to test the corrosion rate of metals induced by a range of factors. Later chapters discuss techniques for monitoring and testing for corrosion. The book concludes by assessing important methods of prevention, including corrosion inhibitors, protective coatings and electrochemical methods for protection, together with rehabilitation procedures for susceptible structures.Filled with practical examples and written by a distinguished team of international contributors, Corrosion of reinforcement in concrete: mechanisms, monitoring, inhibitors and rehabilitation techniques is an essential reference for civil engineers using reinforced concrete. Summarises research into catalysts, inhibitors and effective means of monitoring the rate of corrosion Concludes by assessing important methods of prevention

Book Corrosion and Protection of Materials

Download or read book Corrosion and Protection of Materials written by Marina Cabrini and published by MDPI. This book was released on 2021-04-06 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirty articles on various topics related to the corrosion and protection of metallic materials. This topic is of strong actuality both due to the aging of plants and infrastructures that require checks and maintenance, and to the use of traditional materials in increasingly aggressive environments, added to the need of changing the current anti-corrosion systems with less environmental impact methods. Finally, the new development of innovative materials, such as additive manufacturing or high-entropy alloys, needs the characterization of their corrosion behavior. In this issue, there are works on new alloys obtained for additive manufacturing or high entropy, on the study of corrosion and stress corrosion cracking and hydrogen embrittlement mechanisms, through electrochemical and microscopical techniques, studies on low environmental impact inhibitors and biocides, as well as ceramic and metal protective coatings. Finally, there are works on the study of the residual mechanical resistance of corroded infrastructures and on monitoring and non-destructive control. In this way, the book therefore offers a somewhat varied panorama of research trends in the field.

Book Concrete Solutions

Download or read book Concrete Solutions written by Michael Grantham and published by CRC Press. This book was released on 2009-06-10 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete repair continues to be a subject of major interest to engineers and technologists worldwide. The concrete repair budget for the UK alone currently runs at some UKP 220 per annum. Some estimates have indicated that, worldwide, in 2010 the expenditure for maintenance and repair work will represent about 85% of the total expenditure in the co

Book NBS Building Science Series

Download or read book NBS Building Science Series written by and published by . This book was released on 1974 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Design of Concrete Structures Using High strength Steel Reinforcement

Download or read book Design of Concrete Structures Using High strength Steel Reinforcement written by Bahram M. Shahrooz and published by Transportation Research Board. This book was released on 2011 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 679: Design of Concrete Structures Using High-Strength Steel Reinforcement evaluates the existing American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) Bridge Design Specifications relevant to the use of high-strength reinforcing steel and other grades of reinforcing steel having no discernible yield plateau. The report also includes recommended language to the AASHTO LRFD Bridge Design Specifications that will permit the use of high-strength reinforcing steel with specified yield strengths not greater than 100 ksi. The Appendixes to NCHRP Report 679 were published online.

Book New Challenges and Industrial Applications for Corrosion Prevention and Control

Download or read book New Challenges and Industrial Applications for Corrosion Prevention and Control written by El Kacimi, Younes and published by IGI Global. This book was released on 2020-06-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals are used at an extremely high rate in the industrial and manufacturing fields. Exemplary properties including strength and ductility have made this material highly dynamic; however, the risk of corrosion remains a vital issue. The study of corrosion prevention has attracted interest from researchers and professionals as new technologies are emerging that can assist in the prevention of material destruction. However, research is lacking on the application of these protective technologies within specific fields. New Challenges and Industrial Applications for Corrosion Prevention and Control provides emerging research exploring the theoretical and practical aspects of protective methods against corrosion and the implementation of these techniques within a wide span of professional disciplines. Featuring coverage on a broad range of topics such as molecular modeling, surface treatments, and biomaterials, this book is ideally designed for engineers, industrial chemists, material scientists, researchers, engineers, academicians, practitioners, and students seeking current research on the technological advancements in corrosion protection in various professional scopes.

Book Corrosion of Steel in Concrete

Download or read book Corrosion of Steel in Concrete written by Luca Bertolini and published by John Wiley & Sons. This book was released on 2013-02-26 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel-reinforced concrete is used ubiquitously as a building material due to its unique combination of the high compressive strength of concrete and the high tensile strength of steel. Therefore, reinforced concrete is an ideal composite material that is used for a wide range of applications in structural engineering such as buildings, bridges, tunnels, harbor quays, foundations, tanks and pipes. To ensure durability of these structures, however, measures must be taken to prevent, diagnose and, if necessary, repair damage to the material especially due to corrosion of the steel reinforcement. The book examines the different aspects of corrosion of steel in concrete, starting from basic and essential mechanisms of the phenomenon, moving up to practical consequences for designers, contractors and owners both for new and existing reinforced and prestressed concrete structures. It covers general aspects of corrosion and protection of reinforcement, forms of attack in the presence of carbonation and chlorides, problems of hydrogen embrittlement as well as techniques of diagnosis, monitoring and repair. This second edition updates the contents with recent findings on the different topics considered and bibliographic references, with particular attention to recent European standards. This book is a self-contained treatment for civil and construction engineers, material scientists, advanced students and architects concerned with the design and maintenance of reinforced concrete structures. Readers will benefit from the knowledge, tools, and methods needed to understand corrosion in reinforced concrete and how to prevent it or keep it within acceptable limits.