Download or read book Design Fabrication and Economy of Welded Structures written by K Jarmai and published by Pearson Deutschland GmbH. This book was released on 2008-04 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings cover the fields of different materials and fatigue of welded joints, thin-walled structures, tubular structures, frames, plates and shells and also incorporate special optimization problems, fire and earthquake resistant design, special applications and applied mechanics, and thus provide an important reference for civil and mechanical engineers, architects, designers and fabricators. Proceedings cover the fields of different materials and fatigue of welded joints, thin-walled structures, tubular structures, frames, plates and shells Also incorporate special optimization problems, fire and earthquake resistant design, special applications and applied mechanics Provide an important reference for civil and mechanical engineers, architects, designers and fabricators

Download or read book Design Fabrication and Economy of Metal Structures written by Károly Jármai and published by Springer Science & Business Media. This book was released on 2013-03-15 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the proceedings of the International Conference on Design, Fabrication and Economy of Metal Structures held on 24-26 April 2013 in Miskolc, Hungary which contain 99 papers covering: Structural optimization Thin-walled structures Stability Fatigue Frames Fire Fabrication Welding technology Applications Steel-concrete composite Special problems The authors are from 23 different countries, ensuring that the themes covered are of worldwide interest and importance. The International Institute of Welding (IIW), the International Society of Structural and Multidisciplinary Optimization (ISSMO), the TÁMOP 4.2.1.B-10/2/KONV-2010-0001 project entitled “Increasing the quality of higher education through the development of research - development and innovation program at the University of Miskolc supported by the European Union, co-financed by the European Social Fund” and many other sponsors helped organizers to collect these valuable studies, the results of which will provoke discussion, and provide an important reference for civil and mechanical engineers, architects, researchers and structural designers and fabricators, as well as managers in a range of industries including building, transport, shipbuilding, aircraft, chemical and offshore engineering.

Download or read book Analysis and Optimum Design of Metal Structures written by J Farkas and published by CRC Press. This book was released on 2020-12-17 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailing a number of structural analysis problems such as residual welding stresses and distortions and behaviour of thin-walled rods loaded in bending, this text also explores mathematical function minimization methods, expert systems and optimum design of welded box beams.

Download or read book Optimum Design of Steel Structures written by József Farkas and published by Springer Science & Business Media. This book was released on 2013-03-29 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps designers and manufacturers to select and develop the most suitable and competitive steel structures, which are safe, fit for production and economic. An optimum design system is used to find the best characteristics of structural models, which guarantee the fulfilment of design and fabrication requirements and minimize the cost function. Realistic numerical models are used as main components of industrial steel structures. Chapter 1 containts some experiences with the optimum design of steel structures Chapter 2 treats some newer mathematical optimization methods. Chapter 3 gives formulae for fabrication times and costs. Chapters 4 deals with beams and columns. Summarizes the Eurocode rules for design. Chapter 5 deals with the design of tubular trusses. Chapter 6 gives the design of frame structures and fire-resistant design rules for a frame. In Chapters 7 some minimum cost design problems of stiffened and cellular plates and shells are worked out for cases of different stiffenings and loads. Chapter 8 gives a cost comparison of cylindrical and conical shells. The book contains a large collection of literatures and a subject list and a name index.

Download or read book Design and Optimization of Metal Structures written by J Farkas and published by Elsevier. This book was released on 2008-04-01 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: An industrial book that analyses various theoretical problems, optimizes numerical applications and addresses industrial problems such as belt-conveyor bridge, pipeline, wind turbine power, large-span suspended roof and offshore jacket member. Multi-storey frames and pressure vessel-supporting frames are discussed in detail. The book's emphasis is on economy and cost calculation, making it possible to compare costs and make significant savings in the design stages, by, for example, comparing the costs of stiffened and un-stiffened structural versions of plates and shells. In this respect, this book will be an invaluable aid for designers, students, researchers and manufacturers to find better, optimal, competitive structural solutions. - Emphasis is placed on economy and cost calculation, making it possible to compare costs and make significant savings in the design stages of metal structures - Optimizes numerical applications and analyses various theoretical and industrial problems, such as belt-conveyor bridge, pipeline, wind turbine power, large-span suspended roof and offshore jacket member - An invaluable aid for designers, students, researchers and manufacturers to find better, optimal, competitive structural solutions

Download or read book Finite Element Analysis and Design of Metal Structures written by Ehab Ellobody and published by Elsevier. This book was released on 2013-09-05 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, engineers have used laboratory testing to investigate the behavior of metal structures and systems. These numerical models must be carefully developed, calibrated and validated against the available physical test results. They are commonly complex and very expensive. From concept to assembly, Finite Element Analysis and Design of Metal Structures provides civil and structural engineers with the concepts and procedures needed to build accurate numerical models without using expensive laboratory testing methods. Professionals and researchers will find Finite Element Analysis and Design of Metal Structures a valuable guide to finite elements in terms of its applications. - Presents design examples for metal tubular connections - Simplified review for general steps of finite element analysis - Commonly used linear and nonlinear analyses in finite element modeling - Realistic examples of concepts and procedures for Finite Element Analysis and Design

Download or read book Guide for the Economic Design of Circular Metal Silos written by J.M. Rotter and published by CRC Press. This book was released on 2001-03-01 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the definitive guide to the simple, safe and economic design of circular metal storage silos. Commissioned by the British Materials Handling Board, and written by the convenor of the committee responsible for the new Eurocode on the structural design of silos, it provides advice on all aspects of silo design and assessment. As well as providing guidance for the successful implementation of the new Eurocode, this Guide for the Economic Design of Circular Metal Silos brings together the latest research and provides extensive background information. At this time of great change in the industry it is an invaluable aid, giving additional explanations and advice to designers using the new regulatory standards. This Guide for the Economic Design of Circular Metal Silos is essential reading for structural designers, manufacturers and owners of solids storage facilities worldwide.

Download or read book Tubular Structures XI written by JeffreyA. Packer and published by Routledge. This book was released on 2017-10-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: This topical book contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the "11th International Symposium and IIW International Conference on Tubular Structures". The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the prime international forum for discussion of research, developments and applications in this field. Various key and emerging subjects in the field of hollow structural sections are covered, such as: novel applications and case studies, static and fatigue behaviour of connections/joints, concrete-filled and composite tubular members, earthquake resistance, specification and code developments, material properties and structural reliability, impact resistance and brittle fracture, fire resistance, casting and fabrication innovations. Research and development issues presented in this book are applicable to buildings, bridges, offshore structures, entertainment rides, cranes, towers and various mechanical and agricultural equipment. This book is thus a pertinent reference source for architects, civil and mechanical engineers, designers, steel fabricators and contractors, manufacturers of hollow sections or related construction products, trade associations involved with tubing, owners or developers of tubular structures, steel specification committees, academics and research students. The conference presentations herein include two keynote lectures (the International Institute of Welding Houdremont Lecture and the ISTS Kurobane Lecture), plus finalists in the CIDECT Student Papers Competition. The 11th International Symposium and IIW International Conference on Tubular Structures – ISTS11 – took place in Québec City, Canada from August 31 to September 2, 2006.

Download or read book Optimization for Robot Modelling with MATLAB written by Hazim Nasir Ghafil and published by Springer Nature. This book was released on 2020-02-28 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses optimization in robotics, in terms of both the configuration space and the metal structure of the robot arm itself; and discusses, describes and builds different types of heuristics and algorithms in MATLAB. In addition, the book includes a wealth of examples and exercises. In particular, it enables the reader to write a MATLAB code for all the related problems in robotics. The book also offers detailed descriptions of and builds from scratch several types of optimization algorithms using MATLAB and simplified methods, especially for inverse problems and avoiding singularities. Each chapter features examples and exercises to enhance the reader’s comprehension. Accordingly, the book offers the reader a better understanding of robot analysis from an optimization standpoint.

Download or read book Vehicle and Automotive Engineering written by Károly Jármai and published by Springer. This book was released on 2017-03-23 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the first vehicle engineering and vehicle industry conference. It captures the outcome of theoretical and practical studies as well as the future development trends in a wide field of automotive research. The themes of the conference include design, manufacturing, economic and educational topics.

Download or read book Vehicle and Automotive Engineering 2 written by Károly Jármai and published by Springer. This book was released on 2018-05-09 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the second Vehicle Engineering and Vehicle Industry conference, reflecting the outcomes of theoretical and practical studies and outlining future development trends in a broad field of automotive research. The conference’s main themes included design, manufacturing, economic and educational topics.

Download or read book Vehicle and Automotive Engineering 3 written by Károly Jármai and published by Springer Nature. This book was released on 2020-10-19 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the third Vehicle and Automotive Engineering conference, reflecting the outcomes of theoretical and practical studies and outlining future development trends in a broad field of automotive research. The conference’s main themes included design, manufacturing, economic and educational topics.

Download or read book Vehicle and Automotive Engineering 4 written by Károly Jármai and published by Springer Nature. This book was released on 2022-09-09 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected proceedings of the (third) fourth Vehicle and Automotive Engineering conference, reflecting the outcomes of theoretical and practical studies and outlining future development trends in a broad field of automotive research. The conference’s main themes included design, manufacturing, economic and educational topics.

Download or read book Economic Design of Metal Structures written by József Farkas and published by IOS Press. This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Coupled Instabilities In Metal Structures Cims 96 written by Dan Dubina and published by World Scientific. This book was released on 1996-08-16 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early 1960s, coupled instabilities — also called compound buckling, simultaneous buckling or interactive buckling — have been a topic that was studied by many researchers. However, despite some excellent theoretical works in this field, the relevant subject is not yet satisfactorily considered in modern design codes for metal structures. To fill up this gap and to improve the current situation, a series of International Conferences 'Coupled Instabilities in Metal Structures' was launched in 1992 with the main aim of encouraging an exchange of views between researchers and engineers on the various aspects of coupled instabilities. The success of the first conference, held at Timisoara (Romania) in 1992, and organized by Professors D Dubina & V Gioncu (Politechnica University of Timisoara) and J Rondal (Univ. of Liège), has encouraged the organization of a second conference, to be held in Liège (Belgium) during September 5-7, 1996. A third conference is still forecast for the year 2000.

Download or read book Coupled Instabilities in Metal Structures written by Jacques Rondal and published by Springer. This book was released on 2014-05-04 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the book is to fill up the gaps between theoretical, numerical, and practical design approaches in the field of coupled instabilities of metal structures. The book is organized in a way leading progressively from the mathematical basic theories to the design aspects through numerical and semi-empirical approaches of the interactive buckling of metal structures. Optimum design account taken of coupled instabilities and code aspects are also briefly covered.

Download or read book Design of Steel Structures written by Elias G. Abu-Saba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.