Download or read book Earthquake Resistant Engineering Structures III written by C. A. Brebbia and published by WIT Press (UK). This book was released on 2001 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Third International Conference on Earthquake Resistant and Engineering Structures, ERES III"--P. facing t.p.
Download or read book Earthquake Resistant Engineering Structures X written by C.A. Brebbia and published by WIT Press. This book was released on 2015-09-15 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the latest research on preparation for and mitigation of future earthquakes, this book addresses an area of increasing importance to many areas around the world. It contains research presented at the ninth and latest in a series of biennial conferences on the topic organised by the Wessex Institute. As world population has concentrated in urban areas, we have seen the consequences of natural disasters take an ever higher toll in human life and property. Adding to this trend, earthquake activity is being registered in areas that were not previously very active, thus the need for research into the application of technological advances to the specific area of earthquake engineering. This volume presents those advances. The papers cover Seismic Isolation and Energy Dissipation; Building Performance During Earthquakes; Nonlinear Numerical Analysis; Performance Based Design; Experimental Studies; Seismic Hazard Evaluation and Microzoning for Structural Design; Seismic Hazard Assessment; Case Studies.
Download or read book Elements of Earthquake Engineering and Structural Dynamics written by André Filiatrault and published by Presses inter Polytechnique. This book was released on 2013 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In order to reduce the seismic risk facing many densely populated regions worldwide, including Canada and the United States, modern earthquake engineering should be more widely applied. But current literature on earthquake engineering may be difficult to grasp for structural engineers who are untrained in seismic design. In addition no single resource addressed seismic design practices in both Canada and the United States until now. Elements of Earthquake Engineering and Structural Dynamics was written to fill the gap. It presents the key elements of earthquake engineering and structural dynamics at an introductory level and gives readers the basic knowledge they need to apply the seismic provisions contained in Canadian and American building codes."--Résumé de l'éditeur.
Download or read book Earthquake Resistant Engineering Structures VIII written by C. A. Brebbia and published by WIT Press. This book was released on 2011 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to protect the built environment in earthquake-prone regions of the world It is important to retrofit and rehabilitate existing structures and infrastructure, as well as to ensure the optimal design and construction of new facilities. The high stakes in human life and property in urban densely populated urban areas has been driving research on advances in this field. These advances are presented biennially at a conference organized by the Wessex Institute of Technology. This book contains the papers from the latest conference in the series, which began in 1991. The papers cover Geographical and geotechnical engineering; Seismic hazard and vulnerability; Seismic isolation and energy dissipation; Structural dynamics; Building performance during earthquakes; Retrofitting; Lifelines; Material mechanics and characterisation; Nonlinear numerical analysis; Performance based design; Experimental studies; Safety and security; and Innovative technologies.
Download or read book Earthquake Resistant Engineering Structures VII written by M. Phocas and published by WIT Press. This book was released on 2009-04-23 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the proceedings of the Seventh International Conference on Earthquake Resistant Engineering Structures (ERES), this book presents basic and applied research in the main fields of engineering relevant to earthquake resistant analysis and design of structural systems.
Download or read book Earthquake Resistant Engineering Structures VI written by C. A. Brebbia and published by WIT Press. This book was released on 2007 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of protecting the built environment in earthquake-prone regions of the world involves not only the optimal design and construction of new facilities, but also the upgrading and rehabilitation of existing structures and infrastructures. The latter is a laborious and expensive task, which can be accomplished only gradually. However, the inestimable loss of life and the colossal costs following a major earthquake in a metropolitan area provide sufficient reason to make it an important challenge for the scientific and technical community.Containing papers presented at the Sixth International Conference on Earthquake Resistance and Engineering Structures, this book will be invaluable to engineers, scientists and managers working in industry, academia, research organizations and governments. The book encompasses a wide range of topics such as: Site Effects and Geotechnical aspects; Earthquake resistant design; Seismic Behaviour and Vulnerability; Structural Dynamics; Monitoring and Testing; Bridges; Heritage Buildings; Masonry Construction; Retrofitting; Passive Protection Devices and Seismic Isolation; Lifelines; Design Codes and Response Spectre.
Download or read book Earthquake Resistant Engineering Structures II written by G. Oliveto and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring research for internationally acknowledge authorities, this text contains the proceedings of the second international conference to be held on earthquake resistant engineering structures. Topics relevant to the analysis and design of structures resistant to earthquake damage, including engineering seismology, applicable numerical methods, principles of design, and soil-structure interaction are discussed, while case studies are also presented.
Download or read book Earthquake Resistant Engineering Structures IX written by C. A. Brebbia and published by WIT Press. This book was released on 2013-07-08 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: In earthquake-prone regions of the world it is important not only to ensure that new facilities meet optimal standards but also that existing structures and infrastructure be retrofitted and rehabilitated. As world populations concentrate in urban areas, the stakes in human life and property of such natural disasters as earthquakes becomes higher and higher. This has been driving research on advances in the field. These advances are presented biennially at a conference organised by the Wessex Institute of Technology.The advances presented at the ninth conference in the series, which began in 1991 are presented in this book. The papers cover Plates and other geological risks; Earthquake prediction; Microzoning; Remote sensing / Monitoring / Early warning systems; Seismic codes; Seismic hazard and vulnerability; Tsunamis; Seismic isolation and energy dissipation; Structural dynamics; Building performance during earthquakes; Retrofitting; Lifelines; Material mechanics and characterisation; Nonlinear numerical analysis; Performance based design; Experimental studies; Forensic analysis; Safety and security; Socio-economic issues; Insurance related issues; Innovative technologies; Case studies.
Download or read book Earthquake Resistant Structures written by Mohiuddin Ali Khan and published by Butterworth-Heinemann. This book was released on 2013-03-18 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake engineering is the ultimate challenge for structural engineers. Even if natural phenomena involve great uncertainties, structural engineers need to design buildings, bridges, and dams capable of resisting the destructive forces produced by them. These disasters have created a new awareness about the disaster preparedness and mitigation. Before a building, utility system, or transportation structure is built, engineers spend a great deal of time analyzing those structures to make sure they will perform reliably under seismic and other loads. The purpose of this book is to provide structural engineers with tools and information to improve current building and bridge design and construction practices and enhance their sustainability during and after seismic events. In this book, Khan explains the latest theory, design applications and Code Provisions. Earthquake-Resistant Structures features seismic design and retrofitting techniques for low and high raise buildings, single and multi-span bridges, dams and nuclear facilities. The author also compares and contrasts various seismic resistant techniques in USA, Russia, Japan, Turkey, India, China, New Zealand, and Pakistan. Written by a world renowned author and educator Seismic design and retrofitting techniques for all structures Tools improve current building and bridge designs Latest methods for building earthquake-resistant structures Combines physical and geophysical science with structural engineering
Download or read book Earthquake Resistant Concrete Structures written by Andreas Kappos and published by CRC Press. This book was released on 2014-04-21 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces practising engineers and post-graduate students to modern approaches to seismic design, with a particular focus on reinforced concrete structures, earthquake resistant design of new buildings and assessment, repair and strengthening of existing buildings.
Download or read book Earthquake Resistant Engineering Structures XI written by C.A. Brebbia and published by WIT Press. This book was released on 2017-09-25 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its 11th year, and reporting on the latest research on preparation for and mitigation of future earthquakes, this volume examines an area of increasing importance to many countries around the world. ERES 2017 assembled experts from around the world to present their basic and applied research in the fields of earthquake engineering relevant to the design of structures. As the world’s population has concentrated in urban areas resulting in buildings in regions of high seismic vulnerability, we have seen the consequences of natural disasters take an ever higher toll on human existence. Protecting the built environment in earthquake-prone regions involves not only the optimal design and construction of new facilities, but also the upgrading and rehabilitation of existing structures including heritage buildings, which is an important area of research. Major earthquakes and associated effects, such as tsunamis, continue to stress the need to carry out more research and a better understanding of these phenomena is required to design earthquake resistant buildings and to carry out risk assessment and vulnerability studies. Some of the subject areas covered are: Seismic isolation and energy dissipation; Building performance during earthquakes; Numerical analysis; Performance based design; Experimental studies; Seismic hazards and tsunamis; Safety engineering; Liquefaction; Innovative technologies; Paraseismic devices and Lifelines and resilience.
Download or read book Earthquake Resistant Design of Buildings written by Muhammad Hadi and published by CRC Press. This book was released on 2017-10-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing important concepts in the study of earthquakes related to retrofitting of structures to be made earthquake resistant. The book investigates the pounding effects on base-isolated buildings, the soil-structure-interaction effects on adjacent buildings due to the impact, the seismic protection of adjacent buildings and the mitigation of earthquakeinduced vibrations of two adjacent structures. These concepts call for a new understanding of controlled systems with passive-active dampers and semi-active dampers. The passive control strategy of coupled buildings is investigated for seismic protection in comparison to active and semi-active control strategies.
Download or read book Fundamentals of Earthquake Resistant Construction written by Ellis L. Krinitzsky and published by John Wiley & Sons. This book was released on 1993-01-12 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for engineers without a background in seismic design. Provides design standards and parameters, explaining how to interpret and apply them. Examines and recommends procedures to accommodate the enormous forces and variations in effects common to major earthquakes. Covers practical aspects of soil behavior and structural and foundation design. Gives tips on special construction situations: foundations, dams and retaining walls, strengthening existing structures and construction over active faults.
Download or read book Analysis Procedure for Earthquake Resistant Structures written by Farzad Hejazi and published by Springer. This book was released on 2018-05-15 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an analysis procedure for structures that are exposed to the lateral loads such as earthquake and wind. It includes the process for calculating and distributing the effective load into structural elements, as well as for calculating the displacements for different types of structures, e.g. reinforced concrete and steel framed structures. The book provides civil engineers with clear guidelines on how to perform seismic analysis for various building systems, and how to distribute the lateral load to the structural components. This book consists of 4 chapters: The first chapter offers an introduction, while Chapter 2 discusses moment resistance frame. The final two chapters explore shear wall frames and brace frames respectively. Each chapter follows the same structure, explaining step by step all the necessary algorithms, equations and procedures for calculating 1) loads, 2) the centre of mass, 3) stiffness of structures, 4) centre of stiffness, 5) lateral loading, 6) the distribution of lateral loads, and 7) the lateral displacement. Demonstrating the implementation of real building analysis, the book provides architectural drawings and structural plans at the beginning of each chapter.
Download or read book Seismic Isolation for Earthquake resistant Structures written by Petros Ioannis Komodromos and published by Advances in Earthquake Enginee. This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground motion due to earthquake excitation often induces disastrous disturbances that severely damage structures and their contents. Conventional earthquake-resistant design focuses on the strengthening of structures to avoid collapse, while little attention is paid to the prevention of damage as it is almost impossible to construct completely earthquake proof structures at reasonable cost. This state-of-the-art volume explores seismic isolation as an alternative and performance-based design approach to minimise earthquake induced loads and resulting damage in low to medium-rise buildings. A discussion of the characteristics, advantages and limitations of seismic isolation is followed by a demonstration of its capability to decouple a structure from the damaging effects of ground acceleration. Describes currently used seismic isolation systems in detail. Evaluates the performance of seismically isolated structures and provides examples of their response under earthquake action. Proposes a preliminary design methodology for seismically isolated structures. Accessible to both students and practising structural engineers who need to familiarise themselves with this approach.
Download or read book Earthquake Resistant Engineering Structures IV written by G. Latini and published by Witpress. This book was released on 2003 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the proceedings of the Fourth International Conference on Earthquake Resistant Engineering Structures (ERES), this title presents basic and applied research in the main fields of engineering relevant to earthquake resistant analysis and design of structural systems.
Download or read book Earthquake Engineering for Structural Design written by W.F. Chen and published by CRC Press. This book was released on 2005-11-02 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many important advances in designing earthquake-resistant structures have occurred over the last several years. Civil engineers need an authoritative source of information that reflects the issues that are unique to the field. Comprising chapters selected from the second edition of the best-selling Handbook of Structural Engineering, Earthquake Eng
