Download or read book Guidelines for earthquake resistant non engineered construction written by Arya, Anand S and published by UNESCO. This book was released on 2014-08-25 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Performance Based Seismic Design for Tall Buildings written by Ramin Golesorkhi and published by . This book was released on 2017-10-30 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance-Based Seismic Design (PBSD) is a structural design methodology that has become more common in urban centers around the world, particularly for the design of high-rise buildings. The primary benefit of PBSD is that it substantiates exceptions to prescribed code requirements, such as height limits applied to specific structural systems, and allows project teams to demonstrate higher performance levels for structures during a seismic event.However, the methodology also involves significantly more effort in the analysis and design stages, with verification of building performance required at multiple seismic demand levels using Nonlinear Response History Analysis (NRHA). The design process also requires substantial knowledge of overall building performance and analytical modeling, in order to proportion and detail structural systems to meet specific performance objectives.This CTBUH Technical Guide provides structural engineers, developers, and contractors with a general understanding of the PBSD process by presenting case studies that demonstrate the issues commonly encountered when using the methodology, along with their corresponding solutions. The guide also provides references to the latest industry guidelines, as applied in the western United States, with the goal of disseminating these methods to an international audience for the advancement and expansion of PBSD principles worldwide.

Download or read book Seismic Design of Reinforced Concrete and Masonry Buildings written by Thomas Paulay and published by Wiley-Interscience. This book was released on 1992-04-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes actual structural design, not analysis, of multistory buildings for seismic resistance. Strong emphasis is placed on specific detailing requirements for construction. Fundamental design principles are presented to create buildings that respond to a wide range of potential seismic forces, which are illustrated by numerous detailed examples. The discussion includes the design of reinforced concrete ductile frames, structural walls, dual systems, reinforced masonry structures, buildings with restricted ductility and foundation walls. In addition to the examples, full design calculations are given for three prototype structures.

Download or read book Performance Based Seismic Design of Concrete Structures and Infrastructures written by Plevris, Vagelis and published by IGI Global. This book was released on 2017-02-14 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid design and craftsmanship are a necessity for structures and infrastructures that must stand up to natural disasters on a regular basis. Continuous research developments in the engineering field are imperative for sustaining buildings against the threat of earthquakes and other natural disasters. Performance-Based Seismic Design of Concrete Structures and Infrastructures is an informative reference source on all the latest trends and emerging data associated with structural design. Highlighting key topics such as seismic assessments, shear wall structures, and infrastructure resilience, this is an ideal resource for all academicians, students, professionals, and researchers that are seeking new knowledge on the best methods and techniques for designing solid structural designs.

Download or read book Engineering Aspects of Shape Memory Alloys written by T W Duerig and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Aspects of Shape Memory Alloys provides an understanding of shape memory by defining terms, properties, and applications. It includes tutorials, overviews, and specific design examples—all written with the intention of minimizing the science and maximizing the engineering aspects. Although the individual chapters have been written by many different authors, each one of the best in their fields, the overall tone and intent of the book is not that of a proceedings, but that of a textbook. The book consists of five parts. Part I deals with the mechanism of shape memory and the alloys that exhibit the effect. It also defines many essential terms that will be used in later parts. Part II deals primarily with constrained recovery, but to some extent with free recovery. There is an introductory paper which defines terms and principles, then several specific examples of products based on constrained recovery. Both Parts III and IV deal with actuators. Part III introduces engineering principles while Part IV presents several of the specific examples. Finally, Part V deals with superelasticity, with an introductory paper and then several specific examples of product engineering.

Download or read book Mechanics of Rubber Bearings for Seismic and Vibration Isolation written by James M. Kelly and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Widely used in civil, mechanical and automotive engineering since the early 1980s, multilayer rubber bearings have been used as seismic isolation devices for buildings in highly seismic areas in many countries. Their appeal in these applications comes from their ability to provide a component with high stiffness in one direction with high flexibility in one or more orthogonal directions. This combination of vertical stiffness with horizontal flexibility, achieved by reinforcing the rubber by thin steel shims perpendicular to the vertical load, enables them to be used as seismic and vibration isolators for machinery, buildings and bridges. Mechanics of Rubber Bearings for Seismic and Vibration Isolation collates the most important information on the mechanics of multilayer rubber bearings. It explores a unique and comprehensive combination of relevant topics, covering all prerequisite fundamental theory and providing a number of closed-form solutions to various boundary value problems as well as a comprehensive historical overview on the use of isolation. Many of the results presented in the book are new and are essential for a proper understanding of the behavior of these bearings and for the design and analysis of vibration or seismic isolation systems. The advantages afforded by adopting these natural rubber systems is clearly explained to designers and users of this technology, bringing into focus the design and specification of bearings for buildings, bridges and industrial structures. This comprehensive book: includes state of the art, as yet unpublished research along with all required fundamental concepts; is authored by world-leading experts with over 40 years of combined experience on seismic isolation and the behavior of multilayer rubber bearings; is accompanied by a website at www.wiley.com/go/kelly The concise approach of Mechanics of Rubber Bearings for Seismic and Vibration Isolation forms an invaluable resource for graduate students and researchers/practitioners in structural and mechanical engineering departments, in particular those working in seismic and vibration isolation.

Download or read book Recent Advances and Applications of Hybrid Simulation written by Wei Song and published by Frontiers Media SA. This book was released on 2021-01-13 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Seismic Design Handbook written by Farzad Naeim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook contains up-to-date existing structures, computer applications, and infonnation on planning, analysis, and design seismic design of wood structures. A new and very useful feature of this edition of earthquake-resistant building structures. Its intention is to provide engineers, architects, is the inclusion of a companion CD-ROM disc developers, and students of structural containing the complete digital version of the handbook itself and the following very engineering and architecture with authoritative, yet practical, design infonnation. It represents important publications: an attempt to bridge the persisting gap between l. UBC-IBC (1997-2000) Structural advances in the theories and concepts of Comparisons and Cross References, ICBO, earthquake-resistant design and their 2000. implementation in seismic design practice. 2. NEHRP Guidelines for the Seismic The distinguished panel of contributors is Rehabilitation of Buildings, FEMA-273, Federal Emergency Management Agency, composed of 22 experts from industry and universities, recognized for their knowledge and 1997. extensive practical experience in their fields. 3. NEHRP Commentary on the Guidelinesfor They have aimed to present clearly and the Seismic Rehabilitation of Buildings, FEMA-274, Federal Emergency concisely the basic principles and procedures pertinent to each subject and to illustrate with Management Agency, 1997. practical examples the application of these 4. NEHRP Recommended Provisions for principles and procedures in seismic design Seismic Regulations for New Buildings and practice. Where applicable, the provisions of Older Structures, Part 1 - Provisions, various seismic design standards such as mc FEMA-302, Federal Emergency 2000, UBC-97, FEMA-273/274 and ATC-40 Management Agency, 1997.

Download or read book Displacement based Seismic Design of Structures written by M. J. N. Priestley and published by Iuss Press. This book was released on 2007 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Displacement-Based Seismic Design of Structures is a book primarily directed towards practicing structural designers who are interested in applying performance-based concepts to seismic design. Since much of the material presented in the book has not been published elsewhere, it will also be of considerable interest to researchers, and to graduate and upper-level undergraduate students of earthquake engineering who wish to develop a deeper understanding of how design can be used to control seismic response. The design philosophy is based on determination of the optimum structural strength to achieve a given performance limit state, related to a defined level of damage, under a specified level of seismic intensity. Emphasis is also placed on how this strength is distributed through the structure. This takes two forms: methods of structural analysis and capacity design. It is shown that equilibrium considerations frequently lead to a more advantageous distribution of strength than that resulting from stiffness considerations. Capacity design considerations have been re-examined, and new and more realistic design approaches are presented to insure against undesirable modes of inelastic deformation. The book considers a wide range of structural types, including separate chapters on frame buildings, wall buildings, dual wall/frame buildings, masonry buildings, timber structures, bridges, structures with isolation or added damping devices, and wharves. These are preceded by introductory chapters discussing conceptual problems with current force-based design, seismic input for displacement-based design, fundamentals of direct displacement-based design, and analytical tools appropriate for displacement-based design. The final two chapters adapt the principles of displacement-based seismic design to assessment of existing structures, and present the previously developed design information in the form of a draft building code. The text is illustrated by copious worked design examples (39 in all), and analysis aids are provided in the form of a CD containing three computer programs covering moment-curvature analysis (Cumbia), linear-element-based inelastic time-history analysis (Ruaumoko), and a general fibre-element dynamic analysis program (SeismoStruct). The design procedure developed in this book is based on a secant-stiffness (rather than initial stiffness) representation of structural response, using a level of damping equivalent to the combined effects of elastic and hysteretic damping. The approach has been fully verified by extensive inelastic time history analyses, which are extensively reported in the text. The design method is extremely simple to apply, and very successful in providing dependable and predictable seismic response. Authors Bios M.J.N.Priestley Nigel Priestley is Professor Emeritus of the University of California San Diego, and co-Director of the Centre of Research and Graduate Studies in Earthquake Engineering and Engineering Seismology (ROSE School), Istituto Universitario di Studi Superiori (IUSS), Pavia, Italy. He has published more than 450 papers, mainly on earthquake engineering, and received numerous awards for his research. He holds honorary doctorates from ETH, Zurich, and Cujo, Argentina. He is co-author of two previous seismic design books “Seismic Design of Concrete and Masonry Buildings” and “Seismic Design and Retrofit of Bridges”, that are considered standard texts on the subjects. G.M.Calvi Michele Calvi is Professor of the University of Pavia and Director of the Centre of Research and Graduate Studies in Earthquake Engineering and Engineering Seismology (ROSE School), Istituto Universitario di Studi Superiori (IUSS) of Pavia. He has published more than 200 papers and is co-author of the book “Seismic Design and Retrofit of Bridges”, that is considered a standard text on the subject, has been involved in important construction projects worldwide, such as the Rion Bridge in Greece and the upgrading of the Bolu Viaduct in Turkey, and is coordinating several international research projects. M.J.Kowalsky Mervyn Kowalsky is Associate Professor of Structural Engineering in the Department of Civil, Construction, and Environmental Engineering at North Carolina State University and a member of the faculty of the ROSE School. His research, which has largely focused on the seismic behaviour of structures, has been supported by the National Science Foundation, the North Carolina and Alaska Departments of Transportation, and several industrial organizations. He is a registered Professional Engineer in North Carolina and an active member of several national and international committees on Performance-Based Seismic Design.

Download or read book Seismic Design of Buildings to Eurocode 8 written by Ahmed Elghazouli and published by CRC Press. This book was released on 2016-12-19 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the seismic design of building structures and their foundations to Eurocode 8. It covers the principles of seismic design in a clear but brief manner and then links these concepts to the provisions of Eurocode 8. It addresses the fundamental concepts related to seismic hazard, ground motion models, basic dynamics, seismic analysis, siting considerations, structural layout, and design philosophies, then leads to the specifics of Eurocode 8. Code procedures are applied with the aid of walk-through design examples which, where possible, deal with a common case study in most chapters. As well as an update throughout, this second edition incorporates three new and topical chapters dedicated to specific seismic design aspects of timber buildings and masonry structures, as well as base-isolation and supplemental damping. There is renewed interest in the use of sustainable timber buildings, and masonry structures still represent a popular choice in many areas. Moreover, seismic isolation and supplemental damping can offer low-damage solutions which are being increasingly considered in practice. The book stems primarily from practical short courses on seismic design which have been run over a number of years and through the development Eurocode 8. The contributors to this book are either specialist academics with significant consulting experience in seismic design, or leading practitioners who are actively engaged in large projects in seismic areas. This experience has provided significant insight into important areas in which guidance is required.

Download or read book Building Configuration and Seismic Design written by Christopher Arnold and published by . This book was released on 1981 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Design for Architects written by Andrew Charleson and published by Routledge. This book was released on 2012-06-25 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Design for Architects shows how structural requirements for seismic resistance can become an integral part of the design process. Structural integrity does not have to be at the expense of innovative, high standard design in seismically active zones. * By emphasizing design and discussing key concepts with accompanying visual material, architects are given the background knowledge and practical tools needed to deal with aspects of seismic design at all stages of the design process * Seismic codes from several continents are drawn upon to give a global context of seismic design * Extensively illustrated with diagrams and photographs * A non-mathematical approach focuses upon the principles and practice of seismic resistant design to enable readers to grasp the concepts and then readily apply them to their building designs Seismic Design for Architects is a comprehensive, practical reference work and text book for students of architecture, building science, architectural and civil engineering, and professional architects and structural engineers.

Download or read book The Oxford Handbook of the Bronze Age Aegean written by Eric H. Cline and published by Oxford University Press. This book was released on 2012-01-01 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Greek Bronze Age, roughly 3000 to 1000 BCE, witnessed the flourishing of the Minoan and Mycenean civilizations, the earliest expansion of trade in the Aegean and wider Mediterranean Sea, the development of artistic techniques in a variety of media, and the evolution of early Greek religious practices and mythology. The period also witnessed a violent conflict in Asia Minor between warring peoples in the region, a conflict commonly believed to be the historical basis for Homer's Trojan War. The Oxford Handbook of the Bronze Age Aegean provides a detailed survey of these fascinating aspects of the period, and many others, in sixty-six newly commissioned articles. Divided into four sections, the handbook begins with Background and Definitions, which contains articles establishing the discipline in its historical, geographical, and chronological settings and in its relation to other disciplines. The second section, Chronology and Geography, contains articles examining the Bronze Age Aegean by chronological period (Early Bronze Age, Middle Bronze Age, Late Bronze Age). Each of the periods are further subdivided geographically, so that individual articles are concerned with Mainland Greece during the Early Bronze Age, Crete during the Early Bronze Age, the Cycladic Islands during the Early Bronze Age, and the same for the Middle Bronze Age, followed by the Late Bronze Age. The third section, Thematic and Specific Topics, includes articles examining thematic topics that cannot be done justice in a strictly chronological/geographical treatment, including religion, state and society, trade, warfare, pottery, writing, and burial customs, as well as specific events, such as the eruption of Santorini and the Trojan War. The fourth section, Specific Sites and Areas, contains articles examining the most important regions and sites in the Bronze Age Aegean, including Mycenae, Tiryns, Pylos, Knossos, Kommos, Rhodes, the northern Aegean, and the Uluburun shipwreck, as well as adjacent areas such as the Levant, Egypt, and the western Mediterranean. Containing new work by an international team of experts, The Oxford Handbook of the Bronze Age Aegean represents the most comprehensive, authoritative, and up-to-date single-volume survey of the field. It will be indispensable for scholars and advanced students alike.

Download or read book Design of Seismic Isolated Structures written by Farzad Naeim and published by John Wiley & Sons. This book was released on 1999-03-25 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete, practical coverage of the evaluation, analysis, and design and code requirements of seismic isolation systems. Based on the concept of reducing seismic demand rather than increasing the earthquake resistance capacity of structures, seismic isolation is a surprisingly simple approach to earthquake protection. However, proper application of this technology within complex seismic design code requirements is both complicated and difficult. Design of Seismic Isolated Structures provides complete, up-to-date coverage of seismic isolation, complete with a systematic development of concepts in theory and practical application supplemented by numerical examples. This book helps design professionals navigate and understand the ideas and procedures involved in the analysis, design, and development of specifications for seismic isolated structures. It also provides a framework for satisfying code requirements while retaining the favorable cost-effective and damage control aspects of this new technology. An indispensable resource for practicing and aspiring engineers and architects, Design of Seismic Isolated Structures includes: * Isolation system components. * Complete coverage of code provisions for seismic isolation. * Mechanical characteristics and modeling of isolators. * Buckling and stability of elastomeric isolators. * Examples of seismic isolation designs. * Specifications for the design, manufacture, and testing of isolation devices.

Download or read book Designing for Earthquakes written by Federal Emergency Management Agency and published by www.Militarybookshop.CompanyUK. This book was released on 2006-12 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This full color manual is intended to explain the principles of seismic design for those without a technical background in engineering and seismology. The primary intended audience is that of architects, and includes practicing architects, architectural students and faculty in architectural schools who teach structures and seismic design. For this reason the text and graphics are focused on those aspects of seismic design that are important for the architect to know.

Download or read book WIND AND SEISMIC EFFECTS written by H. S. LEW and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Getty Seismic Adobe Project 2006 Colloquium written by Mary Hardy and published by . This book was released on 2010-06-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: During this three-day colloquium, presented by the Getty Conservation Institute (GCI), a group of professionals with expertise in earthen conservation, materials science, construction, building standards, and earthquake engineering gathered to discuss the current state of knowledge and the challenges of preserving our earthen cultural heritage in active seismic zones. This publication contains a selection of papers presented at the colloquium, as well as several later submissions by participants. For more information on the Getty Conservation Institute's work with earthen architecture, visit the Earthen Architecture Initiative Web site at www.getty.edu/conservation/field_projects/earthen/.