Download or read book Seismic Design of Reinforced Concrete Buildings written by Jack Moehle and published by McGraw Hill Professional. This book was released on 2014-10-06 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete coverage of earthquake-resistant concrete building design Written by a renowned seismic engineering expert, this authoritative resource discusses the theory and practice for the design and evaluation of earthquakeresisting reinforced concrete buildings. The book addresses the behavior of reinforced concrete materials, components, and systems subjected to routine and extreme loads, with an emphasis on response to earthquake loading. Design methods, both at a basic level as required by current building codes and at an advanced level needed for special problems such as seismic performance assessment, are described. Data and models useful for analyzing reinforced concrete structures as well as numerous illustrations, tables, and equations are included in this detailed reference. Seismic Design of Reinforced Concrete Buildings covers: Seismic design and performance verification Steel reinforcement Concrete Confined concrete Axially loaded members Moment and axial force Shear in beams, columns, and walls Development and anchorage Beam-column connections Slab-column and slab-wall connections Seismic design overview Special moment frames Special structural walls Gravity framing Diaphragms and collectors Foundations

Download or read book Earthquake Engineering Research Center Library Printed Catalog written by University of California, Berkeley. Earthquake Engineering Research Center. Library and published by . This book was released on 1975 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Special Report Coastal Engineering Research Center written by Coastal Engineering Research Center (U.S.) and published by . This book was released on 1980 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book National Earthquake Resilience written by National Research Council and published by National Academies Press. This book was released on 2011-09-09 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States will certainly be subject to damaging earthquakes in the future. Some of these earthquakes will occur in highly populated and vulnerable areas. Coping with moderate earthquakes is not a reliable indicator of preparedness for a major earthquake in a populated area. The recent, disastrous, magnitude-9 earthquake that struck northern Japan demonstrates the threat that earthquakes pose. Moreover, the cascading nature of impacts-the earthquake causing a tsunami, cutting electrical power supplies, and stopping the pumps needed to cool nuclear reactors-demonstrates the potential complexity of an earthquake disaster. Such compound disasters can strike any earthquake-prone populated area. National Earthquake Resilience presents a roadmap for increasing our national resilience to earthquakes. The National Earthquake Hazards Reduction Program (NEHRP) is the multi-agency program mandated by Congress to undertake activities to reduce the effects of future earthquakes in the United States. The National Institute of Standards and Technology (NIST)-the lead NEHRP agency-commissioned the National Research Council (NRC) to develop a roadmap for earthquake hazard and risk reduction in the United States that would be based on the goals and objectives for achieving national earthquake resilience described in the 2008 NEHRP Strategic Plan. National Earthquake Resilience does this by assessing the activities and costs that would be required for the nation to achieve earthquake resilience in 20 years. National Earthquake Resilience interprets resilience broadly to incorporate engineering/science (physical), social/economic (behavioral), and institutional (governing) dimensions. Resilience encompasses both pre-disaster preparedness activities and post-disaster response. In combination, these will enhance the robustness of communities in all earthquake-vulnerable regions of our nation so that they can function adequately following damaging earthquakes. While National Earthquake Resilience is written primarily for the NEHRP, it also speaks to a broader audience of policy makers, earth scientists, and emergency managers.

Download or read book Earthquake Engineering written by Alberto Bernal and published by CRC Press. This book was released on 1992-01-01 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The official proceedings of the 10th world conference on earthquake engineering in Madrid. Coverage includes damage in recent earthquakes, seismic risk and hazard, site effects, structural analysis and design, seismic codes and standards, urban planning, and expert system application.

Download or read book Grand Challenges in Earthquake Engineering Research written by National Research Council and published by National Academies Press. This book was released on 2011-10-30 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: As geological threats become more imminent, society must make a major commitment to increase the resilience of its communities, infrastructure, and citizens. Recent earthquakes in Japan, New Zealand, Haiti, and Chile provide stark reminders of the devastating impact major earthquakes have on the lives and economic stability of millions of people worldwide. The events in Haiti continue to show that poor planning and governance lead to long-term chaos, while nations like Chile demonstrate steady recovery due to modern earthquake planning and proper construction and mitigation activities. At the request of the National Science Foundation, the National Research Council hosted a two-day workshop to give members of the community an opportunity to identify "Grand Challenges" for earthquake engineering research that are needed to achieve an earthquake resilient society, as well as to describe networks of earthquake engineering experimental capabilities and cyberinfrastructure tools that could continue to address ongoing areas of concern. Grand Challenges in Earthquake Engineering Research: A Community Workshop Report explores the priorities and problems regions face in reducing consequent damage and spurring technological preparedness advances. Over the course of the Grand Challenges in Earthquake Engineering Research workshop, 13 grand challenge problems emerged and were summarized in terms of five overarching themes including: community resilience framework, decision making, simulation, mitigation, and design tools. Participants suggested 14 experimental facilities and cyberinfrastructure tools that would be needed to carry out testing, observations, and simulations, and to analyze the results. The report also reviews progressive steps that have been made in research and development, and considers what factors will accelerate transformative solutions.

Download or read book Earthquake Engineering Handbook written by Charles Scawthorn and published by CRC Press. This book was released on 2002-09-27 with total page 1508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes are nearly unique among natural phenomena - they affect virtually everything within a region, from massive buildings and bridges, down to the furnishings within a home. Successful earthquake engineering therefore requires a broad background in subjects, ranging from the geologic causes and effects of earthquakes to understanding the imp

Download or read book Earthquake Data in Engineering Seismology written by Sinan Akkar and published by Springer Science & Business Media. This book was released on 2011-01-03 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses current activities in strong-motion networks around the globe, covering issues related to designing, maintaining and disseminating information from these arrays. The book is divided into three principal sections. The first section includes recent developments in regional and global ground-motion predictive models. It presents discussions on the similarities and differences of ground motion estimations from these models and their application to design spectra as well as other novel procedures for predicting engineering parameters in seismic regions with sparse data. The second section introduces topics about the particular methodologies being implemented in the recently established global and regional strong-motion databanks in Europe to maintain and disseminate the archived accelerometric data. The final section describes major strong-motion arrays around the world and their historical developments. The last three chapters of this section introduce projects carried out within the context of arrays deployed for seismic risk studies in metropolitan areas. Audience: This timely book will be of particular interest for researchers who use accelerometric data extensively to conduct studies in earthquake engineering and engineering seismology.

Download or read book Earthquake Engineering Frontiers in the New Millennium written by Y.X. Hu and published by Routledge. This book was released on 2017-11-22 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises papers presented at the China-US Millennium Symposium on Earthquake Engineering, held in Beijing, China, on November 8-11, 2000. This conference provides a forum for advancing the field of earthquake engineering through multi-lateral cooperation.

Download or read book Seismic Assessment and Retrofit of Reinforced Concrete Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003-08-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: In most parts of the developed world, the building stock and the civil infrastructure are ageing and in constant need of maintenance, repair and upgrading. Moreover, in the light of our current knowledge and of modern codes, the majority of buildings stock and other types of structures in many parts of the world are substandard and deficient. This is especially so in earthquake-prone regions, as, even there, seismic design of structures is relatively recent. In those regions the major part of the seismic threat to human life and property comes from old buildings. Due to the infrastructure's increasing decay, frequently combined with the need for structural upgrading to meet more stringent design requirements (especially against seismic loads), structural retrofitting is becoming more and more important and receives today considerable emphasis throughout the world. In response to this need, a major part of the fib Model Code 2005, currently under development, is being devoted to structural conservation and maintenance. More importantly, in recognition of the importance of the seismic threat arising from existing substandard buildings, the first standards for structural upgrading to be promoted by the international engineering community and by regulatory authorities alike are for seismic rehabilitation of buildings. This is the case, for example, of Part 3: Strengthening and Repair of Buildings of Eurocode 8 (i. e. of the draft European Standard for earthquake-resistant design), and which is the only one among the current (2003) set of 58 Eurocodes attempting to address the problem of structural upgrading. It is also the case of the recent (2001) ASCE draft standard on Seismic evaluation of existing buildings and of the 1996 Law for promotion of seismic strengthening of existing reinforced concrete structures in Japan. As noted in Chapter 1 of this Bulletin, fib - as CEB and FIP did before - has placed considerable emphasis on assessment and rehabilitation of existing structures. The present Bulletin is a culmination of this effort in the special but very important field of seismic assessment and rehabilitation. It has been elaborated over a period of 4 years by Task Group 7.1 Assessment and retrofit of existing structures of fib Commission 7 Seismic design, a truly international team of experts, representing the expertise and experience of all the important seismic regions of the world. In the course of its work the team had six plenary two-day meetings: in January 1999 in Pavia, Italy; in August 1999 in Raleigh, North Carolina; in February 2000 in Queenstown, New Zealand; in July 2000 in Patras, Greece; in March 2001 in Lausanne, Switzerland; and in August 2001 in Seattle, Washington. In October 2002 the final draft of the Bulletin was presented to public during the 1st fib Congress in Osaka. It was also there that it was approved by fib Commission 7 Seismic Design. The contents is structured into main chapters as follows: 1 Introduction - 2 Performance objectives and system considerations - 3 Review of seismic assessment procedures - 4 Strength and deformation capacity of non-seismically detailed components - 5 Seismic retrofitting techniques - 6 Probabilistic concepts and methods - 7 Case studies

Download or read book International Handbook of Earthquake Engineering Seismology Part B written by William H.K. Lee and published by Elsevier. This book was released on 2003-07-23 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volume International Handbook of Earthquake and Engineering Seismology represents the International Association of Seismology and Physics of the Earth's Interior's (IASPEI) ambition to provide a comprehensive overview of our present knowledge of earthquakes and seismology. This state-of-the-art work is the only reference to cover all aspects of seismology--a "resource library" for civil and structural engineers, geologists, geophysicists, and seismologists in academia and industry around the globe.Part B, by more than 100 leading researchers from major institutions of science around the globe, features 34 chapters detailing strong-motion seismology, earthquake engineering, quake prediction and hazards mitigation, as well as detailed reports from more than 40 nations. Also available is The International Handbook of Earthquake and Engineering Seismology, Part A. - Authoritative articles by more than 100 leading scientists - Extensive glossary of terminology plus 2000+ biographical sketches of notable seismologists

Download or read book Earthquake Resistant Design with Rubber written by James M. Kelly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: My involvement in the use of natural rubber as a method for the protec 1976. At that time, tion of buildings against earthquake attack began in I was working on the development of energy-dissipating devices for the same purpose and had developed and tested a device that was even tually used in a stepping-bridge structure, this being a form of partial isolation. It became clear to me that in order to use these energy devices for the earthquake protection of buildings, it would be best to combine them with an isolation system which would give them the large displace ments needed to develop sufficient hysteresis. At this appropriate point in time, I was approached by Dr. C. J. Derham, then of the Malaysian Rubber Producers' Research Association (MRPRA), who asked if I was interested in looking at the possibility of conducting shaking table tests at the Earthquake Simulator Laboratory to see to what extent natural rubber bearings could be used to protect buildings from earthquakes. Very soon after this meeting, we were able to do such a test using a 20-ton model and hand-made isolators. The eady tests were very promising. Accordingly, a further set of tests was done with a more realistic five storey model weighing 40 tons with bearings that were commercially made. In both of the test series, the isolators were used both alone and with a number of different types of energy-dissipating devices to en hance damping.

Download or read book NEHRP Commentary on the Gidelines for the Seismic Rehabilitation of Buildings written by Eugene Zeller and published by DIANE Publishing. This book was released on 2000-06 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document from the National Earthquake Hazards Reduction Program (NEHRP) was prepared for the Building Seismic Safety Council (BSSC) with funding from the Federal Emergency Management Agency (FEMA). It provides commentary on the NEHRP Guidelines for the Seismic Rehabilitation of Buildings. It contains systematic guidance enabling design professionals to formulate effective & reliable rehabilitation approaches that will limit the expected earthquake damage to a specified range for a specified level of ground shaking. This kind of guidance applicable to all types of existing buildings & in all parts of the country has never existed before. Illustrated.

Download or read book Response Control and Seismic Isolation of Buildings written by Masahiko Higashino and published by Routledge. This book was released on 2006-09-27 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state of the art report from an international task group (TG44) of CIB, the International Council of Building Research Organizations, presents a highly authoritative guide to the application of innovative technologies on response control and seismic isolation of buildings to practice worldwide. Many countries and cities are located in earthquake-prone areas making effective seismic design a major issue in structural engineering. Reassuringly, structural response control and seismic isolation have advanced remarkably in recent years following numerous studies internationally. Several major conferences have been held and reports have been written but little has been issued on the application of the technologies to good structural engineering practice. Plugging that gap, Response Control and Seismic Isolation of Buildings presents researchers in structural engineering (dynamics) and construction management with up-to-date applications of the latest technologies.

Download or read book Seismic Considerations for Communities at Risk written by Christopher Arnold and published by DIANE Publishing. This book was released on 1998-03 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This community handbook will increase awareness of seismic risk & includes up-to-date information on seismic design & construction practices. It is designed to provide interested individuals across the nation with information that will assist them in assessing the seismic risk to their buildings & their community & in determining what might be done to mitigate that risk -- whether on an individual basis or through community building regulatory action. Contents: when happens to structures when the ground moves? decisions, decisions! how can I make my community act? codes & standards. etc. Illustrated.

Download or read book Bracing for Disaster written by Stephen Tobriner and published by Heyday.ORIM. This book was released on 2015-05-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: “The first history of seismic engineering in San Francisco . . . spiced with survivor and eyewitness accounts. ”—Midwest Book Review For the past one hundred and fifty years, architects and engineers have quietly been learning from each quake and designing newer earthquake-resistant building techniques and applying them in an ongoing effort to save San Francisco. Bracing for Disaster is a fresh appraisal of a city responding to repeated devastation. In the language of a skilled teacher, Tobriner examines what really happened during the city’s earthquakes—which buildings were damaged, which survived, and who were the unsung heroes. Filled with more than two hundred photographs, diagrams, and illustrations, this is a revealing look at the history of buildings by a true expert, and it offers lessons not just for San Francisco but for any city beset by natural disasters. “The real saga is how a fast-growing city grapples with the reality that it has more to worry about than fires and fog. The core of the story is fairly technical, rooted in the crude intuitive ways in which builders reacted to a seismic threat they could neither measure nor define. But Tobriner crafts the story well.”—SFGate

Download or read book Geotechnical Applications for Earthquake Engineering Research Advancements written by Sitharam, T.G. and published by IGI Global. This book was released on 2012-04-30 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disaster preparedness and response management is a burgeoning field of technological research, and staying abreast of the latest developments within the field is a difficult task. Geotechnical Applications for Earthquake Engineering: Research Advancements has collected chapters from experts from around the world in a variety of applications, frameworks, and methodologies, and prepared them in a form that serves as a handy reference and research guide to practitioners and academics alike. By protecting society with earthquake engineering, the latest research can make the world a safer place.