Download or read book Dynamics of the Distribution Mechanisms written by Ion Petrescu and published by Lulu.com. This book was released on 2011 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamics of Crank Piston Mechanisms written by Nodar Davitashvili and published by Springer. This book was released on 2016-01-08 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph focuses on the dynamical research work on crank-piston mechanisms considering basic and additional motions. In order to have full dynamical analyses of piston machines and their mechanisms, the book studies the crank-piston mechanisms with clearances in kinematic pairs. The tasks are carried out by focusing on friction, wear and impacts in mechanisms, as well as cracks formation in links and elasticity of details, with distributed and concentrated masses. Then, the reliability and durability of the mechanisms of piston machines is applied on oil and gas transportation. The monograph is meant for design specialists. It is also useful for specialists-manufacturers and designers of piston machines, scientists and lecturers, doctoral students.

Download or read book Proceedings of the 17th Annual International Symposium on High Performance Computing Systems and Applications and the OSCAR Symposium written by National Research Council Canada and published by NRC Research Press. This book was released on 2003 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 17th annual International Symposium on High Performance Systems and Applications (HPCS 2003) and the first OSCAR Symposium were held in Sherbrooke, Quebec Canada, May 11-14, 2003. The proceedings cover various areas of High Performance Computing, from specific scientific applications to computer architecture. OSCAR is an Open Source clustering software suite for building, maintaining, and using high performance clusters.

Download or read book Mechanical Engineering Design I Color written by Relly Victoria Petrescu and published by BoD – Books on Demand. This book was released on 2013 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering Design is the first edition of a largest old preocupation of the authors in this field. It presents the design of the Otto Motors, kinematics and dynamics, a new Otto engine, the efficiency of the engines with internal combustion, the design of the V engines, the design of the distribution mechanisms, the design of the power train and the design of the drivetrain. It presents as well the design of the planetary trains with their real efficiency. The book has 14 chapters. Since the predominant component in all chapters is the dynamics, the book might be called and dynamic design in mechanical engineering.

Download or read book Modeling the Dynamics and Consequences of Land System Change written by Xiangzheng Deng and published by Springer Science & Business Media. This book was released on 2011-12-22 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Modeling the Dynamics and Consequences of Land System Change" introduces an innovative three-tier architecture approach for modeling the dynamics and consequences of land system change. It also describes the principle, modules and the applications of the three-tier architecture model in detail. The approach holds strong potential for accurate predictions of the land use structure at the regional level, simulating the land use pattern at pixel level and evaluating the consequences of land system change. The simulation results can be used for the planning of land use, urban development, regional development, environmental protection, and also serve as valuable information for decision making concerning land management and optimal utilization of land resources. The book is intended for the researchers and professionals in land use or land systems, regional environmental change, ecological conservation, as well as the land resource administrative agencies and environmental protection agencies. Professor Xiangzheng Deng is a senior research fellow at the Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, China.

Download or read book Camshaft Precision written by Florian Ion Petrescu and published by BoD – Books on Demand. This book was released on 2012 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the first chapter the authors present an original method to calculate the efficiency of the cams mechanisms. The second chapter presents an original method in determining a general, dynamic and differential equation for the motion of machines and mechanisms, particularized for the mechanisms with rotation cams and followers. The third chapter presents an original method to determine the general dynamics of mechanisms with rotation cams and followers, particularized to the plate translated follower. First, it presents the dynamics kinematics. Then it solves the Lagrange equation and using an original dynamic model with one degree of freedom, with variable internal amortization, it makes the dynamic analysis. The fourth chapter briefly presents an original method for determining the dynamics of mechanisms with rotation cam and translated follower with roll. First, one presents the dynamics kinematics. Then one performs the dynamic analysis of a few models, for some movement laws, imposed on the follower, by the designed cam profile. The fifth chapter presents an original methods to determine the dynamic parameters at the classic distribution, and a new method is presented in the sixth chapter. The seventh chapter presents an original methods to determine the dynamic parameters at the camshaft with rotary cam and translated follower with roll.

Download or read book Dynamics of Stellar Systems written by K. F. Ogorodnikov and published by Elsevier. This book was released on 2016-10-13 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics of Stellar Systems focuses on the theoretical problems in stellar dynamics. The book first offers information on stellar dynamics, including historical development, fundamentals of synthetic method, and value of stellar dynamics. The text discusses the fundamental concepts of stellar statistics. Properties of univariate distribution functions; multivariate distribution functions; and statistical properties of stars are explained. The text then describes the elementary theory of galactic rotation and irregular forces in stellar systems. The text also tackles statistical stellar dynamics of neglecting encounters. Considerations include Boltzmann equation in curvilinear coordinates; importance of using one-valued integrals of the motion; and fundamental differential equation of stellar dynamics. The book also underscores the regular orbit of stars and dynamics of centroids. The text describes the dynamics of spherical stellar and rotating stellar systems. The theory of polytropic spheres; basic equations for spherical systems; masses and rotation of galaxies; and boundaries of galaxies are discussed. The text is highly recommended for readers interested in stellar dynamics.

Download or read book Dynamics of Machinery written by Hans Dresig and published by Springer Science & Business Media. This book was released on 2010-07-27 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic loads and undesired oscillations increase with higher speed of machines. At the same time, industrial safety standards require better vibration reduction. This book covers model generation, parameter identification, balancing of mechanisms, torsional and bending vibrations, vibration isolation, and the dynamic behavior of drives and machine frames as complex systems. Typical dynamic effects, such as the gyroscopic effect, damping and absorption, shocks, resonances of higher order, nonlinear and self-excited vibrations are explained using practical examples. These include manipulators, flywheels, gears, mechanisms, motors, rotors, hammers, block foundations, presses, high speed spindles, cranes, and belts. Various design features, which influence the dynamic behavior, are described. The book includes 60 exercises with detailed solutions. The substantial benefit of this "Dynamics of Machinery" lies in the combination of theory and practical applications and the numerous descriptive examples based on real-world data. The book addresses graduate students as well as engineers.

Download or read book Power System Dynamics and Stability written by Jan Machowski and published by John Wiley & Sons. This book was released on 1997-10-20 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the demand for electrical power increases, power systems are being operated closer to their stability limits than ever before. This text focuses on explaining and analysing the dynamic performance of such systems which is important for both system operation and planning. Placing emphasis on understanding the underlying physical principles, the book opens with an exploration of basic concepts using simple mathematical models. Building on these firm foundations the authors proceed to more complex models and algorithms. Features include: * Progressive approach from simplicity to complexity. * Detailed description of slow and fast dynamics. * Examination of the influence of automatic control on power system dynamics. * Stability enhancement including the use of PSS and Facts. * Advanced models and algorithms for power system stability analysis. Senior undergraduate, postgraduate and research students studying power systems will appreciate the authors' accessible approach. Also for electric utility engineers, this valuable resource examines power system dynamics and stability from both a mathematical and engineering viewpoint.

Download or read book Life System Modeling and Intelligent Computing written by Minrui Fei and published by Springer. This book was released on 2010-09-08 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2010 International Conference on Life System Modeling and Simulation (LSMS 2010) and the 2010 International Conference on Intelligent Computing for Sustainable Energy and Environment (ICSEE 2010) were formed to bring together researchers and practitioners in the fields of life system modeling/simulation and intelligent computing applied to worldwide sustainable energy and environmental applications. A life system is a broad concept, covering both micro and macro components ra- ing from cells, tissues and organs across to organisms and ecological niches. To c- prehend and predict the complex behavior of even a simple life system can be - tremely difficult using conventional approaches. To meet this challenge, a variety of new theories and methodologies have emerged in recent years on life system modeling and simulation. Along with improved understanding of the behavior of biological systems, novel intelligent computing paradigms and techniques have emerged to h- dle complicated real-world problems and applications. In particular, intelligent c- puting approaches have been valuable in the design and development of systems and facilities for achieving sustainable energy and a sustainable environment, the two most challenging issues currently facing humanity. The two LSMS 2010 and ICSEE 2010 conferences served as an important platform for synergizing these two research streams.

Download or read book Cohesive sedimentary systems Dynamics and deposits written by Andrew James Manning and published by Frontiers Media SA. This book was released on 2024-01-30 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamic Systems Biology Modeling and Simulation written by Joseph DiStefano III and published by Academic Press. This book was released on 2015-01-10 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Systems Biology Modeling and Simuation consolidates and unifies classical and contemporary multiscale methodologies for mathematical modeling and computer simulation of dynamic biological systems – from molecular/cellular, organ-system, on up to population levels. The book pedagogy is developed as a well-annotated, systematic tutorial – with clearly spelled-out and unified nomenclature – derived from the author's own modeling efforts, publications and teaching over half a century. Ambiguities in some concepts and tools are clarified and others are rendered more accessible and practical. The latter include novel qualitative theory and methodologies for recognizing dynamical signatures in data using structural (multicompartmental and network) models and graph theory; and analyzing structural and measurement (data) models for quantification feasibility. The level is basic-to-intermediate, with much emphasis on biomodeling from real biodata, for use in real applications. - Introductory coverage of core mathematical concepts such as linear and nonlinear differential and difference equations, Laplace transforms, linear algebra, probability, statistics and stochastics topics - The pertinent biology, biochemistry, biophysics or pharmacology for modeling are provided, to support understanding the amalgam of "math modeling with life sciences - Strong emphasis on quantifying as well as building and analyzing biomodels: includes methodology and computational tools for parameter identifiability and sensitivity analysis; parameter estimation from real data; model distinguishability and simplification; and practical bioexperiment design and optimization - Companion website provides solutions and program code for examples and exercises using Matlab, Simulink, VisSim, SimBiology, SAAMII, AMIGO, Copasi and SBML-coded models - A full set of PowerPoint slides are available from the author for teaching from his textbook. He uses them to teach a 10 week quarter upper division course at UCLA, which meets twice a week, so there are 20 lectures. They can easily be augmented or stretched for a 15 week semester course - Importantly, the slides are editable, so they can be readily adapted to a lecturer's personal style and course content needs. The lectures are based on excerpts from 12 of the first 13 chapters of DSBMS. They are designed to highlight the key course material, as a study guide and structure for students following the full text content - The complete PowerPoint slide package (~25 MB) can be obtained by instructors (or prospective instructors) by emailing the author directly, at: [email protected]

Download or read book Camshaft Precision Color written by Florian Ion Petrescu and published by BoD – Books on Demand. This book was released on 2013 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the first chapter the authors present an original method to calculate the efficiency of the cams mechanisms. The second chapter presents an original method in determining a general, dynamic and differential equation for the motion of machines and mechanisms, particularized for the mechanisms with rotation cams and followers. The third chapter presents an original method to determine the general dynamics of mechanisms with rotation cams and followers, particularized to the plate translated follower. First, it presents the dynamics kinematics. Then it solves the Lagrange equation and using an original dynamic model with one degree of freedom, with variable internal amortization, it makes the dynamic analysis. The fourth chapter briefly presents an original method for determining the dynamics of mechanisms with rotation cam and translated follower with roll. First, one presents the dynamics kinematics. Then one performs the dynamic analysis of a few models, for some movement laws, imposed on the follower, by the designed cam profile. The fifth chapter presents an original method to determine the dynamic parameters at the classic distribution, and a new method is presented in the sixth chapter. The seventh chapter presents an original method to determine the dynamic parameters at the camshaft with rotary cam and translated follower with roll.

Download or read book Dynamics and Control of Process Systems 2004 written by Sirish Shah and published by Elsevier. This book was released on 2005-06-10 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Data Intensive Computing written by Borko Furht and published by Springer Science & Business Media. This book was released on 2011-12-10 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data Intensive Computing refers to capturing, managing, analyzing, and understanding data at volumes and rates that push the frontiers of current technologies. The challenge of data intensive computing is to provide the hardware architectures and related software systems and techniques which are capable of transforming ultra-large data into valuable knowledge. Handbook of Data Intensive Computing is written by leading international experts in the field. Experts from academia, research laboratories and private industry address both theory and application. Data intensive computing demands a fundamentally different set of principles than mainstream computing. Data-intensive applications typically are well suited for large-scale parallelism over the data and also require an extremely high degree of fault-tolerance, reliability, and availability. Real-world examples are provided throughout the book. Handbook of Data Intensive Computing is designed as a reference for practitioners and researchers, including programmers, computer and system infrastructure designers, and developers. This book can also be beneficial for business managers, entrepreneurs, and investors.

Download or read book Industrial Design in Mechanical Engineering written by Florian Ion Petrescu and published by Lulu.com. This book was released on 2011 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Parasitic Phenomena in the Dynamics of Industrial Devices written by Alberto Borboni and published by CRC Press. This book was released on 2011-10-06 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the real world the dynamic behavior of a real machine presents either unforeseen or limiting phenomena: both are undesired, and can be therefore be classified as parasitic phenomena — unwanted, unforeseen, or limiting behaviors. Parasitic Phenomena in the Dynamics of Industrial Devices describes the potential causes and effects of these behaviors and provides indications that could minimize their influence on the mechanical system in question. The authors introduce the phenomena and explore them through real cases, avoiding academic introductions, but inserting the entire academic and experimental knowledge that is useful to understand and solve real-world problems. They then examine these parasitic phenomena in the machine dynamics, using two cases that cover the classical cultural division between cam devices and mechanisms. They also present concrete cases with an amount of experimental data higher than the proposed ones and with a modern approach that can be applied to various mechanical devices, acquiring real knowledge superior to one of the mere finite element systems or collections of mechanical devices. Organizes machine dynamics through systems theory to give a comprehensive vision of the design problem Details machine dynamics at an advanced mathematics level and avoids redundancy of fundamental knowledge Introduces real machine cases for solutions to practical problems Covers two broad classes of mechanical devices that are widely used in the construction of instrumental goods Employs a mechatronic approach that can be applied to electro-mechanical, hydro-mechanical, or pneumo-mechanical machines Highlighting industrial devices in the manufacturing industry, including industrial indexing devices and industrial robots, the book offers case studies, advanced models, design methods, and short examples of applications. It is of critical importance for any manufacturing enterprise that produces significant amounts of objects through a process with one or more automated phases.