Download or read book Dynamics and Vibration Analyses of Gearbox in Wind Turbine written by Qingkai Han and published by Springer. This book was released on 2016-09-27 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the dynamics and vibration properties of gearboxes, with a focus on geared rotor systems. It discusses mechanical theories, finite-element based simulations, experimental measurements and vibration signal processing techniques. It introduces the vibration-resonance calculation method for the geared rotor system in wind turbines and load sharing of the planetary gear train, and offers a method for calculating the vibrations of geared rotor systems under either internal excitations from gear sets or external loads transferred from wind loads. It also defines and elaborates on parameter optimization for planetary gear systems based on the torsional dynamics of wind-turbine geared rotor systems. Moreover, it describes experimental measurements of vibrations on the wind-turbine gearbox performed on the test rig and on site, and analyzes the vibration signals of different testing points, showing them in both time and frequency domains. Lastly, it lists the gear coupling frequencies and fault characteristic frequencies from the vibrations of the gearbox housing. The technologies and results presented are valuable resources for use in dynamic design, vibration prediction and analysis of gearboxes and geared rotor systems in wind turbines as well as many other machines.

Download or read book Examination of a Technique for the Early Detection of Failure in Gears by Signal Processing of the Time Domain Average of the Meshing Vibration written by P. D. McFadden and published by . This book was released on 1986 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: An existing technique for the signal processing to the time domain average of the tooth meshing vibration of gears is examined with application to the early detection of failure. It is shown that the regular signal extracted from the time domain average of the gear vibration by the elimination of the fundamental and harmonics of the tooth meshing frequency forms the time domain average of the vibration of a single tooth. The residual signal which is obtained by subtracting the regular signal from the original time domain average gives the departures of the vibration from the average. Numerical and practical examples are given. (Author).

Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2011-03-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.

Download or read book Offshore Wind Energy Technology written by Olimpo Anaya-Lara and published by John Wiley & Sons. This book was released on 2018-05-11 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: A COMPREHENSIVE REFERENCE TO THE MOST RECENT ADVANCEMENTS IN OFFSHORE WIND TECHNOLOGY Offshore Wind Energy Technology offers a reference based on the research material developed by the acclaimed Norwegian Research Centre for Offshore Wind Technology (NOWITECH) and material developed by the expert authors over the last 20 years. This comprehensive text covers critical topics such as wind energy conversion systems technology, control systems, grid connection and system integration, and novel structures including bottom-fixed and floating. The text also reviews the most current operation and maintenance strategies as well as technologies and design tools for novel offshore wind energy concepts. The text contains a wealth of mathematical derivations, tables, graphs, worked examples, and illustrative case studies. Authoritative and accessible, Offshore Wind Energy Technology: Contains coverage of electricity markets for offshore wind energy and then discusses the challenges posed by the cost and limited opportunities Discusses novel offshore wind turbine structures and floaters Features an analysis of the stochastic dynamics of offshore/marine structures Describes the logistics of planning, designing, building, and connecting an offshore wind farm Written for students and professionals in the field, Offshore Wind Energy Technology is a definitive resource that reviews all facets of offshore wind energy technology and grid connection.

Download or read book Wind Turbine Control Systems written by Fernando D. Bianchi and published by Springer Science & Business Media. This book was released on 2006-09-07 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasizes the application of Linear Parameter Varying (LPV) gain scheduling techniques to the control of wind energy conversion systems. This reformulation of the classical problem of gain scheduling allows straightforward design procedure and simple controller implementation. From an overview of basic wind energy conversion, to analysis of common control strategies, to design details for LPV gain-scheduled controllers for both fixed- and variable-pitch, this is a thorough and informative monograph.

Download or read book Topics in Modal Analysis I Volume 7 written by James De Clerck and published by Springer Science & Business. This book was released on 2014-04-28 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This seventh volume of eight from the IMAC - XXXII Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Linear Systems Substructure Modelling Adaptive Structures Experimental Techniques Analytical Methods Damage Detection Damping of Materials & Members Modal Parameter Identification Modal Testing Methods System Identification Active Control Modal Parameter Estimation Processing Modal Data

Download or read book Current Signature Analysis for Condition Monitoring of Cage Induction Motors written by William T. Thomson and published by John Wiley & Sons. This book was released on 2017-01-24 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of Motor Current Signature Analysis (MCSA) for cage induction motors This book is primarily for industrial engineers. It has 13 chapters and contains a unique data base of 50 industrial case histories on the application of MCSA to diagnose broken rotor bars or unacceptable levels of airgap eccentricity in cage induction motors with ratings from 127 kW (170 H.P.) up to 10,160 kW (13,620 H.P.). There are also unsuccessful case histories, which is another unique feature of the book. The case studies also illustrate the effects of mechanical load dynamics downstream of the motor on the interpretation of current signatures. A number of cases are presented where abnormal operation of the driven load was diagnosed. Chapter 13 presents a critical appraisal of MCSA including successes, failures and lessons learned via industrial case histories. The case histories are presented in a step by step format, with predictions and outcomes supported by current spectra and photographic evidence to confirm a correct or incorrect diagnosis The case histories are presented in detail so readers fully understand the diagnosis The authors have 108 years of combined experience in the installation, maintenance, repair, design, manufacture, operation and condition monitoring of SCIMs There are 10 questions at the end of chapters 1 to 12 and answers can be obtained via the publisher Current Signature Analysis for Condition Monitoring of Cage Induction Motors serves as a reference for professional engineers, head electricians and technicians working with induction motors. To obtain the solutions manual for this book, please send an email to [email protected]. William T. Thomson is Director and Consultant with EM Diagnostics Ltd, in Scotland. Prof. Thomson received a BSc (Hons) in Electrical Engineering in 1973 and an MSc in 1977 from the University of Strathclyde. He has published 72 papers on condition monitoring of induction motors in a variety of engineering journals such as IEEE Transactions (USA), IEE Proceedings (UK), and also at numerous International IEEE and IEE conferences. He is a senior member of the IEEE, a fellow of the IEE (IET) in the UK and a Chartered Professional Engineer registered in the UK. Ian Culbert was a Rotating Machines Specialist at Iris Power Qualitrol since April 2002 until his very untimely death on 8th September, 2015. At this company he provided consulting services to customers, assisted in product development, trained sales and field service staff and reviewed stator winding partial discharge reports. He has co-authored two books on electrical machine insulation design, evaluation, aging, testing and repair and was principal author of a number of Electric Power Research Institute reports on motor repair. Ian was a Registered Professional Engineer in the Province of Ontario, Canada and a Senior Member of IEEE.

Download or read book MARE WINT written by Wiesław Ostachowicz and published by Springer. This book was released on 2016-08-30 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a holistic, interdisciplinary overview of offshore wind energy, and is a must-read for advanced researchers. Topics, from the design and analysis of future turbines, to the decommissioning of wind farms, are covered. The scope of the work ranges from analytical, numerical and experimental advancements in structural and fluid mechanics, to novel developments in risk, safety & reliability engineering for offshore wind.The core objective of the current work is to make offshore wind energy more competitive, by improving the reliability, and operations and maintenance (O&M) strategies of wind turbines. The research was carried out under the auspices of the EU-funded project, MARE-WINT. The project provided a unique opportunity for a group of researchers to work closely together, undergo multidisciplinary doctoral training, and conduct research in the area of offshore wind energy generation. Contributions from expert, external authors are also included, and the complete work seeks to bridge the gap between research and a rapidly-evolving industry.

Download or read book Power Transmissions written by Datong Qin and published by CRC Press. This book was released on 2016-11-10 with total page 2126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Conference on Power Transmissions 2016, held in Chongqing, China, 27th-30th October 2016. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and a range of applications. The presented papers are catalogued into three main tracks, including design, simulation and testing, materials and manufacturing, and industrial applications. The design, simulation and testing track covers topics such as new methods and designs for all types of transmissions, modelling and simulation of power transmissions, strength, fatigue, dynamics and reliability of power transmissions, lubrication and sealing technologies and theories, and fault diagnosis of power transmissions. In the materials and manufacturing track, topics include new materials and heat treatment of power transmissions, new manufacturing technologies of power transmissions, improved tools to predict future demands on production systems, new technologies for ecologically sustainable productions and those which preserve natural resources, and measuring technologies of power transmissions. The proceedings also cover the novel industrial applications of power transmissions in marine, aerospace and railway contexts, wind turbines, the automotive industry, construction machinery, and robots.

Download or read book Advanced Wind Turbine Technology written by Weifei Hu and published by Springer. This book was released on 2018-05-07 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the current challenges in modern wind turbine analysis, design and development, and provides a comprehensive examination of state-of-the-art technologies from both academia and industry. The twelve information-rich chapters cover a wide range of topics including reliability-based design, computational fluid dynamics, gearbox and bearing analyses, lightning analysis, structural dynamics, health condition monitoring, advanced techniques for field repair, offshore floating wind turbines, advanced turbine control and grid integration, and other emerging technologies. Each chapter begins with the current status of technology in a lucid, is easy-to-follow treatment, then elaborates on the corresponding advanced technology using detailed methodologies, graphs, mathematical models, computational simulations, and experimental instrumentation. Relevant to a broad audience from students and faculty to researchers, manufacturers, and wind energy engineers and designers, the book is ideal for both educational and research needs. Presents the latest developments in reliability-based design optimization, CFD of wind turbines, structural dynamics for wind turbine blades, off-shore floating wind turbines, advanced wind turbine control, and wind power and ramp forecasting for grid integration; Includes techniques for wind turbine gearboxes and bearings, evaluation of lightning strike damage, health condition monitoring and reparation techniques; Illustrates theories and operational considerations using graphics, tables, computational algorithms, simulation models, and experimental instrumentation; Examines unique, innovative technologies for wind energy.

Download or read book Topics in Modal Analysis Parameter Identification Volume 9 written by Brandon J. Dilworth and published by Springer Nature. This book was released on 2023-12-08 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in Modal Analysis, Testing & Parameter Identification, Volume 9: Proceedings of the 41st IMAC, A Conference and Exposition on Structural Dynamics, 2023, the ninth volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Modal Analysis, Modal Testing and Modal Parameter Identification including papers on: Analytical Methods Modal Applications Basics of Modal Analysis Experimental Techniques Operational Modal Analysis Modal Parameter Identification Novel Techniques Rotating Machinery Additive Manufacturing Applications Biomedical Applications

Download or read book Topics in Modal Analysis Volume 10 written by Michael Mains and published by Springer. This book was released on 2015-04-15 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in Modal Analysis, Volume 10: Proceedings of the 33rd IMAC, A Conference and Exposition on Structural Dynamics, 2015, the tenth volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Experimental Techniques Processing Modal Data Rotating Machinery Acoustics Adaptive Structures Biodynamics Damping

Download or read book New Approaches to Gear Design and Production written by Veniamin Goldfarb and published by Springer Nature. This book was released on 2020-01-25 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third book in a series devoted to gear design and production. Comprising papers by scientists and gear experts from around the globe, it covers recent developments in practically all spheres of mechanical engineering related to gears and transmissions. It describes advanced approaches to research, design, testing and production of various kinds of gears for a vast range of applications, with a particular focuses on advanced computer-aided approaches for gear analysis, simulation and design, the application of new materials and tribological issues.

Download or read book Gear Noise and Vibration written by J. Derek Smith and published by CRC Press. This book was released on 2003-04-08 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on over 40 years of consultation and teaching experience, Gear Noise and Vibration demonstrates logical gear noise and vibration approaches without the use of complex mathematics or lengthy computation methods. The second edition offers new and extended discussions on high- and low-contact ratio gears, lightly loaded gears, planetary and spli

Download or read book International Gear Conference 2014 26th 28th August 2014 Lyon written by Philippe Velex and published by Chandos Publishing. This book was released on 2014-09-18 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Gear Conference 2014, held in Lyon, 26th-28th August 2014. Mechanical transmission components such as gears, rolling element bearings, CVTs, belts and chains are present in every industrial sector and over recent years, increasing competitive pressure and environmental concerns have provided an impetus for cleaner, more efficient and quieter units. Moreover, the emergence of relatively new applications such as wind turbines, hybrid transmissions and jet engines has led to even more severe constraints. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and range of applications (aerospace, automotive, wind turbine, and others) including topical issues such as power losses and efficiency, gear vibrations and noise, lubrication, contact failures, tribo-dynamics and nano transmissions. - A truly international contribution with more than 120 papers from all over the world - A judicious balance between fundamental research and industrial concerns - Participation of the most respected international experts in the field of gearing - A wide range of applications in terms of size, power, speed, and industrial sector

Download or read book Advances in Mechanical Design written by Jianrong Tan and published by Springer Nature. This book was released on 2022-03-15 with total page 2373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focus on innovation, main objectives are to bring the community of researchers in the fields of mechanical design together; to exchange and discuss the most recent investigations, challenging problems and new trends; and to encourage the wider implementation of the advanced design technologies and tools in the world, particularly throughout China. The theme of 2021 ICMD is “Interdisciplinary and Design Innovation” and this conference is expected to provide an excellent forum for cross-fertilization of ideas so that more general, intelligent, robust and computationally economical mechanical design methods are created for multi-disciplinary applications.

Download or read book Gears and Gear Drives written by Damir T. Jelaska and published by John Wiley & Sons. This book was released on 2012-08-23 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding how gears are formed and how they interact or ‘mesh’ with each other is essential when designing equipment that uses gears or gear trains. The way in which gear teeth are formed and how they mesh is determined by their geometry and kinematics, which is the topic of this book. Gears and Gear Drives provides the reader with comprehensive coverage of gears and gear drives. Spur, helical, bevel, worm and planetary gears are all covered, with consideration given to their classification, geometry, kinematics, accuracy control, load capacity and manufacturing. Cylindrical gear geometry is the basis for dealing with any gear drives, so this is covered in detail. Key features: Contains hundreds of 2D and 3D figures to illustrate all types of gears and gear drives, including planetary and worm gears Includes fundamental derivations and explanations of formulae Enables the reader to know how to carry out accuracy control and load capacity checks for any gear drive Includes directions for the practical design of gears and gear drives Covers DIN and ISO standards in the area Gears and Gear Drives is a comprehensive reference for gears and gear drive professionals and graduate students in mechanical engineering departments and covers everything important to know how to design, control and manufacture gear drives.