Download or read book Dynamic Equivalent Modeling of Acoustic Metamaterials written by Nansha Gao and published by Springer Nature. This book was released on 2022-10-17 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book derives physical models from basic principles, studies the effect of equivalent models on the dynamic characteristics of phononic crystals and acoustic metamaterials, and analyzes the physical mechanisms behind vibration and noise reduction. It first summarizes the research status of vibration and noise reduction, and research progress in phononic crystals and acoustic metamaterials. Based on this, one-dimensional periodic beam, two-dimensional thin plate with circular hole, and corresponding gradient structures are introduced, and their dynamic characteristics are discussed in detail. Therefore, different equivalent methods for different models are proposed through theoretical analysis, modal analysis and transmission rate analysis. Finally, a Helmholtz-type acoustic metamaterial, i.e. a multi-layer slotted tube acoustic metamaterial, is studied. Aiming at the low-frequency band gap of this model, a theoretical model for solving the inverse problem of acousto-electric analogue equivalent is proposed, and the effect of structural parameters on the low-frequency band gap is studied using this equivalent model. This book closely revolves around how to conduct equivalent research on artificially fabricated periodic structures. The methods and conclusions presented in this book provide a new theoretical basis for the application of artificial woven periodic structures in the field of low-frequency vibration reduction and noise reduction and are also an innovation in the discipline of vibration and noise control. This book is suitable for undergraduate students, graduate students and teachers in vibration and noise majors in universities, and can also provide references for engineering and technical personnel in related fields.

Download or read book Acoustic Metamaterials and Phononic Crystals written by Pierre A. Deymier and published by Springer Science & Business Media. This book was released on 2013-01-13 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book presents all aspects of acoustic metamaterials and phononic crystals. The emphasis is on acoustic wave propagation phenomena at interfaces such as refraction, especially unusual refractive properties and negative refraction. A thorough discussion of the mechanisms leading to such refractive phenomena includes local resonances in metamaterials and scattering in phononic crystals.

Download or read book Dynamic Behavior of Materials Volume 1 written by Jamie Kimberley and published by Springer. This book was released on 2017-10-29 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2017 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the first volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: Quantitative Visualization Fracture & Fragmentation Dynamic Behavior of Low Impedance Materials Shock & Blast Dynamic Behavior of Composites Novel Testing Techniques Hybrid Experimental & Computational Methods Dynamic Behavior of Geo-materials General Material Behavior

Download or read book Size Dependent Continuum Mechanics Approaches written by Esmaeal Ghavanloo and published by Springer Nature. This book was released on 2021-04-02 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive and timely report of size-dependent continuum mechanics approaches. Written by scientists with worldwide reputation and established expertise, it covers the most recent findings, advanced theoretical developments and computational techniques, as well as a range of applications, in the field of nonlocal continuum mechanics. Chapters are concerned with lattice-based nonlocal models, Eringen’s nonlocal models, gradient theories of elasticity, strain- and stress-driven nonlocal models, and peridynamic theory, among other topics. This book provides researchers and practitioners with extensive and specialized information on cutting-edge theories and methods, innovative solutions to current problems and a timely insight into the behavior of some advanced materials and structures. It also offers a useful reference guide to senior undergraduate and graduate students in mechanical engineering, materials science, and applied physics.

Download or read book Multiscale Lattices and Composite Materials Optimal Design Modeling and Characterization written by Fernando Fraternali and published by Frontiers Media SA. This book was released on 2019-11-26 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals and Applications of Acoustic Metamaterials written by Vicente Romero-Garcia and published by John Wiley & Sons. This book was released on 2019-08-09 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, metamaterials have revolutionized the ways in which waves are controlled, and applied in physics and practical situations. The extraordinary properties of metamaterials, such as their locally resonant structure with deep subwavelength band gaps and their ranges of frequency where propagation is impossible, have opened the way to a host of applications that were previously unavailable. Acoustic metamaterials have been able to replace traditional treatments in several sectors, due to their better performance in targeted and tunable frequency ranges with strongly reduced dimensions. This is a training book composed of nine chapters written by experts in the field, giving a broad overview of acoustic metamaterials and their uses. The book is divided into three parts, covering the state-of-the-art, the fundamentals and the real-life applications of acoustic metamaterials.

Download or read book Wave Dynamics Mechanics and Physics of Microstructured Metamaterials written by Mezhlum A. Sumbatyan and published by Springer. This book was released on 2019-05-17 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses theoretical and experimental methods for exploring microstructured metamaterials, with a special focus on wave dynamics, mechanics, and related physical properties. The authors use various mathematical and physical approaches to examine the mechanical properties inherent to particular types of metamaterials. These include: • Boundary value problems in reduced strain gradient elasticity for composite fiber-reinforced metamaterials • Self-organization of molecules in ferroelectric thin films • Combined models for surface layers of nanostructures • Computer simulation at the micro- and nanoscale • Surface effects with anisotropic properties and imperfect temperature contacts • Inhomogeneous anisotropic metamaterials with uncoupled and coupled surfaces or interfaces • Special interface finite elements and other numerical and analytical methods for composite structures

Download or read book Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials written by Mezhlum A. Sumbatyan and published by Springer. This book was released on 2018-07-29 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with topical problems concerning technology and design in construction of modern metamaterials. The authors construct the models of mechanical, electromechanical and acoustical behavior of the metamaterials, which are founded upon mechanisms existing on micro-level in interaction of elementary structures of the material. The empiric observations on the phenomenological level are used to test the created models. The book provides solutions, based on fundamental methods and models using the theory of wave propagation, nonlinear theories and composite mechanics for media with micro- and nanostructure. They include the models containing arrays of cracks, defects, with presence of micro- and nanosize piezoelectric elements and coupled physical-mechanical fields of different nature. The investigations show that the analytical, numerical and experimental methods permit evaluation of the qualitative and quantitative properties of the materials of this sort, with diagnosis of their effective characteristics, frequency intervals of effective energetic cutting and passing, as well as effective regimes of damage evaluation by the acoustic methods.

Download or read book Generalized Models and Non classical Approaches in Complex Materials 1 written by Holm Altenbach and published by Springer. This book was released on 2018-03-24 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of 2 special volumes dedicated to the memory of Gérard Maugin. Including 40 papers that reflect his vast field of scientific activity, the contributions discuss non-standard methods (generalized model) to demonstrate the wide range of subjects that were covered by this exceptional scientific leader. The topics range from micromechanical basics to engineering applications, focusing on new models and applications of well-known models to new problems. They include micro–macro aspects, computational endeavors, options for identifying constitutive equations, and old problems with incorrect or non-satisfying solutions based on the classical continua assumptions.

Download or read book New Acoustics Based on Metamaterials written by Woon Siong Gan and published by Springer. This book was released on 2017-12-10 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the acoustical metamaterials’ capability to manipulate the direction of sound propagation in solids which in turn control the scattering, diffraction and refraction, the three basic mechanisms of sound propagation in solids. This gives rise to several novel theories and applications and hence the name new acoustics. As an introduction, the book mentions that symmetry of acoustic fields is the theoretical framework of acoustical metamaterials. This is then followed by describing that acoustical metamaterials began with locally resonant sonic materials which ushered in the concept of negative acoustic parameters such as mass density and bulk modulus. This complies with form invariance of the acoustic equation of motion which again exemplifies the symmetry property of acoustic fields.

Download or read book Innovations in Mechanical Engineering written by G. S. V. L. Narasimham and published by Springer Nature. This book was released on 2022-03-02 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Innovations in Mechanical Engineering (ICIME 2021). It presents innovative ideas and new findings in the field of mechanical engineering. Various topics covered in this book are aerospace engineering, automobile engineering, thermal engineering, renewable energy sources, bio-mechanics, fluid mechanics, MEMS, mechatronics, robotics, CAD/CAM, CAE, CFD, design andoptimization, tribology, materials engineering and metallurgy, mimics, surface engineering, nanotechnology, polymer science, manufacturing, production management, industrial engineering and rapid prototyping. This book will be useful for the students, researchers and professionals working in the various areas of mechanical engineering.

Download or read book Proceedings of 2023 the 6th International Conference on Mechanical Engineering and Applied Composite Materials written by Xiaowei Yue and published by Springer Nature. This book was released on with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Issues in Applied Physics 2012 Edition written by and published by ScholarlyEditions. This book was released on 2013-01-10 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Applied Physics / 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Radiation Research. The editors have built Issues in Applied Physics: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Radiation Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Applied Physics: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Progress in Continuum Mechanics written by Holm Altenbach and published by Springer Nature. This book was released on 2023-11-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an insight into the current developments in the field of continuum mechanics. Twenty-five researchers present new theoretical concepts, e.g., better inclusion of the microstructure in the models describing material behavior. At the same time, there are also more applications for the theories in engineering practice. In addition to new theoretical approaches in continuum mechanics and applications, the book puts an emphasis on discussing multi-physics problems.

Download or read book Developments and Novel Approaches in Nonlinear Solid Body Mechanics written by Bilen Emek Abali and published by Springer Nature. This book was released on 2020-07-18 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features selected manuscripts presented at ICoNSoM 2019, exploring cutting-edge methods for developing novel models in nonlinear solid mechanics. Innovative methods like additive manufacturing—for example, 3D printing— and miniaturization mean that engineers need more accurate techniques for modeling solid body mechanics. The book focuses on the formulation of continuum and discrete models for complex materials and systems, particularly the design of metamaterials.

Download or read book Proceedings of 17th Symposium on Earthquake Engineering Vol 1 written by Manish Shrikhande and published by Springer Nature. This book was released on 2023-08-28 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 17th Symposium on Earthquake Engineering organized by the Department of Earthquake Engineering, Indian Institute of Technology Roorkee. The topics covered in the proceedings include engineering seismology and seismotectonics, earthquake hazard assessment, seismic microzonation and urban planning, dynamic properties of soils and ground response, ground improvement techniques for seismic hazards, computational soil dynamics, dynamic soil–structure interaction, codal provisions on earthquake-resistant design, seismic evaluation and retrofitting of structures, earthquake disaster mitigation and management, and many more. This book also discusses relevant issues related to earthquakes, such as human response and socioeconomic matters, post-earthquake rehabilitation, earthquake engineering education, public awareness, participation and enforcement of building safety laws, and earthquake prediction and early warning system. This book is a valuable reference for researchers and professionals working in the area of earthquake engineering.

Download or read book Programmable Elastic Metamaterials for Wave Control and Device Applications written by Hui Chen and published by Frontiers Media SA. This book was released on 2023-10-27 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging from electromagnetic waves and fast extending to acoustic and elastic waves, metamaterials that exhibit extraordinary wave control abilities have been gaining soaring attention. Over the past two decades, elastic metamaterials with engineered microstructures have provided a variety of appealing solutions for controlling elastic waves and vibrations. By tailoring their internal microstructures at a subwavelength scale, elastic metamaterials fruitfully distinct themselves from traditional materials or phononic crystals by their striking functions in wave trajectory manipulation, cloaking, nonreciprocal and topological wave control, as well as low-frequency wave/vibration mitigation and absorption.