Download or read book Dynamic Effect of Traffic Loading on Highway Bridges written by Muhammad Uzair Khan and published by . This book was released on 1997 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamic Impact Factors for Bridges written by David I. McLean and published by Transportation Research Board. This book was released on 1998 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to state department of transportation and consulting bridge, structural, and research engineers. The synthesis describes the current state of the practice for determining dynamic impact factors for bridges. Information for the synthesis was collected by surveying U.S. and Canadian transportation agencies and by conducting a literature search using domestic and foreign sources. This report of the Transportation Research Board documents relevant background and recent information with regard to vehicular dynamic load effects on bridges. It provides details on the basic concepts of bridge dynamics, including identification of the main variables affecting bridge dynamic response. In addition, current code provisions for accounting for vehicular dynamic load effects for new bridge design and load evaluation of existing bridges are reported, including a discussion on the background of the provisions. Finally, a discussion of observed field problems associated with vehicular dynamic load effects, as obtained from the survey, are included.

Download or read book Bridge Traffic Loading written by Eugene OBrien and published by CRC Press. This book was released on 2021-12-03 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is considerable uncertainty about what level of traffic loading bridges should be designed for. Codes specify notional load models, generally to represent extreme levels of normal traffic, but these are often crude and have inconsistent levels of safety for different load effects. Over the past few decades, increasing quantities of reliable truck weight data has become available and it is now possible to calculate appropriate levels of bridge traffic loading, both for specific bridges and for a road network. Bridge Traffic Loading brings together experts from all over the world to deliver not just the state-of-the-art of vertical loading, but also to provide recommendations of best-practice for all the major challenges in the field – short-span, single and multi-lane bridge loading, dynamic allowance and long-span bridges. It reviews issues that continue to be debated, such as which statistical distribution is most appropriate, whether free-flowing or congested traffic governs and dealing with future traffic growth. Specialist consultants and bridge owners should find this invaluable, as will regulators.

Download or read book Dynamics of Highway Bridges written by Don Albert Linger and published by . This book was released on 1960 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the design of highway bridges, the static live load is multiplied by a factor to compensate for the dynamic effect of moving vehicles. This factor, commonly referred to as an impact factor, is intended to provide for the dynamic response of the bridge to moving loads and suddenly applied forces. Many investigators have published research which contradicts the current impact formula 1, 4, 17. Some investigators feel that the problem of impact deals not only with the increase in over-all static live load but that is an integral part of a dynamic load distribution problem 24. The current expanded highway program with the large number of bridge structures required emphasizes the need for investigating some of the dynamic behavior problems which have been generally ignored by highway engineers. These problems generally result from the inability of a designer to predict the dynamic response of a bridge structure. Many different investigations have been made of particular portions of the overall dynamic problem. The results of these varied investigations are inevitably followed by a number of unanswered questions. Ironically, many of the unanswered questions are those which are of immediate concern in the design of highway bridges, and this emphasizes the need for additional research on the problem of impact.

Download or read book Vehicle bridge Interaction Dynamics written by Yeong-Bin Yang and published by World Scientific. This book was released on 2004 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: The commercial operation of the bullet train in 1964 in Japan marked the beginning of a new era for high-speed railways. Because of the huge amount of kinetic energy carried at high speeds, a train may interact significantly with the bridge and even resonate with it under certain circumstances. Equally important is the riding comfort of the train cars, which relates closely to the maneuverability of the train during its passage over the bridge at high speeds.This book is unique in that it is devoted entirely to the interaction between the supporting bridges and moving trains, the so-called vehicle-bridge interaction (VBI). Finite element procedures have been developed to treat interaction problems of various complexities, while the analytical solutions established for some typical problems are helpful for identifying the key parameters involved. Besides, some field tests were conducted to verify the theories established.This book provides an up-to-date coverage of research conducted on various aspects of the VBI problems. Using the series of VBI elements derived, the authors study a number of frontier problems, including the impact response of bridges with elastic bearings, the dynamic response of curved beam to moving centrifugal forces, the stability and derailment of trains moving over bridges shaken by earthquakes, the impact response of two trains crossing on a bridge, the steady-state response of trains moving over elevated bridges, and so on.

Download or read book Design of Highway Bridges for Extreme Events written by Michel Ghosn and published by Transportation Research Board. This book was released on 2003 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapter 1. Introduction -- Chapter 2. Reliability models for combinations of extreme events -- Chapter 3. Calibration of load factors for combinations of extreme events -- Chapter 4. Conclusions and future research -- References -- Glossary of notations -- Appendixes.

Download or read book Bridge Loads written by Colin O'Connor and published by CRC Press. This book was released on 2000-08-03 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed summary of bridge loads from an international perspective. The authors cover all aspects from the methodology behind the calculation of bridge loads and the complex interactions between loads and bridges, to economic considerations. A wide range of bridge loads are covered, including highway vehicle loads, pedestrian l

Download or read book Dynamic Loading and Design of Structures written by Andreas Kappos and published by CRC Press. This book was released on 2001-10-11 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now, information on the dynamic loading of structures has been widely scattered. No other book has examined the different types of loading in a comprehensive and systematic manner, and looked at their signficance in the design process. The book begins with a survey of the probabilistic background to all forms of loads, which is particularly i

Download or read book Structural Bridge Engineering written by Shahiron Shahidan and published by BoD – Books on Demand. This book was released on 2016-10-12 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many books on preliminary studies and research in bridge design as well as basic knowledge on bridge engineering, but most books supply the needs of practicing engineers who may have problems in estimating, designing or constructing suspension bridges. Therefore, this book is intended to serve as a source of information for problems related to bridge engineering including sustainable bridge development, traditional approaches and recent advances in highway bridge traffic loading, aesthetic analysis issues in designing a new bridge, applications of various methods for the dissipation of seismic energy for bridges, new technologies of bridge design as well as structural identification of bridges using non-destructive experimental measurement tests.

Download or read book Handbook of Vehicle Road Interaction written by David Cebon and published by CRC Press. This book was released on 2000-01-01 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook dicussess tyre-road contact forces generated by heavy vehicles covering their influence on road surface and bridge response and damage, as well as ways of regulating and improving vehicles so as to minimize road damage.;The main incentive for understanding vehicle-road interaction is the possibility of reducing the road damage caused by heavy vehicles and the very high associated costs. This may be achieved by highway authorities, through improved design and construction of roads; by government agencies, through regulations intended to encourage the use of more "road-friendly" vehicles; or by vehicle engineers, through design of improved vehicle configurations and suspensions, which minimize road damage.;The book provides a unified mechanistic approach to the entire subject, covering vehicle dynamics; dynamic tyre forces; weigh-in-motion; pavement and bridge response; damage mechanisms of paving materials; vehicle-guideway interaction; suspension design to minimize road damage; and assessing road damaging potential of vehicles for regulatory purposes. It includes 25 literature reviews, covering topics from asphalt deformation to weigh-in-motion, and citing over 500 references. In addition, it discusses both the fundamental mechanics of the mechanical and civil engineering systems, as well as practical and implementation issues.

Download or read book Bridge Weigh in Motion Challenges and Opportunities written by Xiangang Lai and published by . This book was released on 2021 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traffic loads on the highway bridges have been increasing in the past years. Actual truck axle configurations and weights may deviate significantly from standard legal design trucks depending on States, freight corridors, and seasons. Changes in legal truckloads are often made by state legislatures based on the pressure by the trucking industry. It is important to understand how trucks impact bridges and whether they cause deterioration and degradation so that policy decisions on legal truckloads can be based on scientific facts. The information of the actual passing vehicles that would be required to address such concerns includes actual truck axle loads and configurations, speeds, and dynamic effects. The critical questions are: How can we measure truck axle configurations and weights over the long term? How can we identify and measure the corresponding critical bridge responses over the long term, and how can we relate these to changes in the bridge life cycle? Finding objective answers to these questions requires complex research. This study is a first step through exploring bridge weigh-in-motion (B-WIM) algorithms, which help to capture the truck’s information for instrumented bridges in operations. Several B-WIM algorithms were inspected first and classified based on their assumptions in incorporating dynamic bridge vehicle interaction. For instance, B-WIM algorithms can be classified as static and dynamic. For the static case, the dynamic effect caused by the interaction between vehicle and bridge is mostly ignored, which results in significant inaccuracies when the dynamic component of the coupled systems is not insignificant or challenging to filter out. Therefore, this study mainly focuses on dynamic algorithms. Various dynamic algorithms, such as dynamic programming and augmented Kalman filters (AKF), have been investigated for their challenges and opportunities they offer into B-WIM applications. Various techniques were employed to address the potential deficiency of dynamic algorithms. These techniques include modal superposition technique to deal with complex structures, mode truncation, singular value decomposition to mitigate the singularity of the formulation matrices, and dummy measurements to improve the identification process's observability. The influence of different parameters on the performance of AKF based B-WIM algorithms were investigated via a parametric study of a simply supported beam subject to moving forces. The results show that those parameter has been carefully chosen for the success of the force prediction. A B-WIM framework was developed. The framework is composed of all the components required to estimate the vehicular weights all the way up from conceptualizations. Critical ones include structural identification to prepare the digital twin, eigenvalue reduction to reduce the dimension of the problem, the numerically verified AKF algorithm, and a parameter tuning method based on optimization technique. A scale model inspired by a typical highway bridge span was designed and constructed in the laboratory following the Similitude Theory. It aims to demonstrate the capability of the proposed B-WIM framework. Multiple tests with different vehicular speeds, weights, and moving paths were conducted and analyzed. Complete force-time histories were predicted and discussed. For B-WIM, the vehicular weights were calculated by averaging the force-time history segment where the vehicle was entirely on the bridge, and results show good agreement between the predicted forces and the static weights.

Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 2435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.

Download or read book Research Perspectives written by Peter Dawe and published by Thomas Telford. This book was released on 2003 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed examination of all aspects of traffic loading and describes how design and assessment methods have evolved to deal with them.

Download or read book Loading history and its effects on highway bridges pilot study written by and published by . This book was released on 1970 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Highway Vehicle bridge Coupled Vibrations Numerical Simulations And Applications written by Steve C S Cai and published by World Scientific. This book was released on 2020-09-23 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle-bridge interaction happens all the time on roadway bridges and this interaction performance carries much useful information. On one hand, while vehicles are traditionally viewed as loads for bridges, they can also be deemed as sensors for bridges' structural response. On the other hand, while bridges are traditionally viewed as carriers for vehicle weight, they can also be deemed as scales that can weigh the vehicle loads. Based on these observations, a broad area of studies based on the vehicle-bridge interaction have been conducted in the authors' research group. Understanding the vehicle and bridge interaction can help develop strategies for bridge condition assessment, bridge design, and bridge maintenance, as well as develop insight for new research needs.This book documents fundamental knowledge, new developments, and state-of-the-art applications related to vehicle-bridge interactions. It thus provides useful information for graduate students and researchers and therefore straddles the gap between theoretical research and practical applications.

Download or read book Highway Bridge Superstructure Engineering written by Narendra Taly and published by CRC Press. This book was released on 2014-11-21 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: A How-To Guide for Bridge Engineers and Designers Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis provides a detailed discussion of traditional structural design perspectives, and serves as a state-of-the-art resource on the latest design and analysis of highway bridge superstructures. This book is applicable to highway bridges of all construction and material types, and is based on the load and resistance factor design (LRFD) philosophy. It discusses the theory of probability (with an explanation leading to the calibration process and reliability), and includes fully solved design examples of steel, reinforced and prestressed concrete bridge superstructures. It also contains step-by-step calculations for determining the distribution factors for several different types of bridge superstructures (which form the basis of load and resistance design specifications) and can be found in the AASHTO LRFD Bridge Design Specifications. Fully Realize the Basis and Significance of LRFD Specifications Divided into six chapters, this instructive text: Introduces bridge engineering as a discipline of structural design Describes numerous types of highway bridge superstructures systems Presents a detailed discussion of various types of loads that act on bridge superstructures and substructures Discusses the methods of analyses of highway bridge superstructures Includes a detailed discussion of reinforced and prestressed concrete bridges, and slab-steel girder bridges Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis can be used for teaching highway bridge design courses to undergraduate- and graduate-level classes, and as an excellent resource for practicing engineers.

Download or read book Highway Bridge Superstructure Engineering written by Narendra Taly and published by CRC Press. This book was released on 2014-11-21 with total page 951 pages. Available in PDF, EPUB and Kindle. Book excerpt: A How-To Guide for Bridge Engineers and DesignersHighway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis provides a detailed discussion of traditional structural design perspectives, and serves as a state-of-the-art resource on the latest design and analysis of highway bridge superstructures. This book is applicable to hig