Download or read book Dynamic Behavior of Macromolecules Near Attractive and Repulsive Solid liquid Interfaces written by John Robert Englert and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Water Soluble Polymers for Petroleum Recovery written by G.A. Stahl and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: We both found ourselves working on water-soluble polymers for oil recovery in the early 1980' s. Our previ ous backgrounds i nvo 1 ved the synthesi sand characteri zati on of hydrocarbon polymers for everythi ng from elastomers to plastics. As such, we were largely unprepared for the special difficulties associated with water soluble polymers in genera 1, and thei ruse in enhanced oi 1 recovery (EOR) , in parti cul ar. Oil patch applications have a jargon and technical heritage quite apart from that usually experienced by traditional polymer scientists. At that time, no books were available to help us "get up to speed" in the polymers for oil recovery field. Since then, there have been a number of symposia on this topic, but still few books, especially from the polymer (rather than the field-applications) perspective. Synthetic water soluble/swellable polymers have commercial importance in such application as water treatment, cosmetics, and foods. Yet, these polymers have not received the scientific/technological attention they deserve. The application of water soluble polymers to oil recovery has, in fact, highlighted the need for new water based materials, and a fundamental understanding of their structure and use. Interest has been spurred not only for the potenti a 1 economi c credi ts from enhanced oi 1 recovery and an augmented polymers business, but also by the challenge of designing water soluble polymers for harsh environments.
Download or read book Powders and Fibers written by Michel Nardin and published by CRC Press. This book was released on 2006-12-21 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: New analytical methods have provided further insight into the structure, surface characteristics, and chemistries of increasingly small particles. However, current literature offers information on only a limited number of powders being investigated. Written by renowned scientists in the field, Powders and Fibers: Interfacial Science and Application
Download or read book Interface Science and Composites written by Soo-Jin Park and published by Academic Press. This book was released on 2011-07-18 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of Interface Science and Composites is to facilitate the manufacture of technological materials with optimized properties on the basis of a comprehensive understanding of the molecular structure of interfaces and their resulting influence on composite materials processes. From the early development of composites of various natures, the optimization of the interface has been of major importance. While there are many reference books available on composites, few deal specifically with the science and mechanics of the interface of materials and composites. Further, many recent advances in composite interfaces are scattered across the literature and are here assembled in a readily accessible form, bringing together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface science of composites to optimize the basic physical principles rather than on the use of materials and the mechanical performance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It also deals mainly with interfaces in advanced composites made from high-performance fibers, such as glass, carbon, aramid, and some inorganic fibers, and matrix materials encompassing polymers, carbon, metals/alloys, and ceramics. Includes chapter on the development of a nanolevel dispersion of graphene particles in a polymer matrix Focus on tailoring the interface science of composites to optimize the basic physical principles Covers mainly interfaces in advanced composites made from high performance fibers
Download or read book Fundamentals of Surface Thermodynamics written by Ronaldo Gonçalves dos Santos and published by Springer Nature. This book was released on with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Colloids and the Depletion Interaction written by Henk N.W. Lekkerkerker and published by Springer Science & Business Media. This book was released on 2011-05-12 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloids are submicron particles that are ubiquitous in nature (milk, clay, blood) and industrial products (paints, drilling fluids, food). In recent decades it has become clear that adding depletants such as polymers or small colloids to colloidal dispersions allows one to tune the interactions between the colloids and in this way control the stability, structure and rheological properties of colloidal dispersions. This book offers a concise introduction to the fundamentals of depletion effects and their influence on the phase behavior of colloidal dispersions. Throughout the book, conceptual explanations are accompanied by experimental and computer simulation results. From the review by Kurt Binder: "They have succeeded in writing a monograph that is a very well balanced compromise between a very pedagogic introduction, suitable for students and other newcomers, and reviews of the advanced research trends in the field. Thus each chapter contains many and up to date references, but in the initial sections of the chapters, there are suggested exercises which will help the interested reader to recapitulate the main points of the treatment and to deepen his understanding of the subject. Only elementary knowledge of statistical thermodynamics is needed as a background for understanding the derivations presented in this book; thus this text is suitable also for advanced teaching purposes, useful of courses which deal with the physics for soft condensed matter. There does not yet exist any other book with a similar scope..... The readability of this book is furthermore enhanced by a list of symbols, and index of keywords, and last not least by a large number of figures, including many pedagogic sketches which were specifically prepared for this book. Thus, this book promises to be very useful for students and related applied sciences alike." Eur. Phys. J. E (2015) 38: 73
Download or read book Intermolecular and Surface Forces written by Jacob N. Israelachvili and published by Academic Press. This book was released on 2011-07-22 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermolecular and Surface Forces describes the role of various intermolecular and interparticle forces in determining the properties of simple systems such as gases, liquids and solids, with a special focus on more complex colloidal, polymeric and biological systems. The book provides a thorough foundation in theories and concepts of intermolecular forces, allowing researchers and students to recognize which forces are important in any particular system, as well as how to control these forces. This third edition is expanded into three sections and contains five new chapters over the previous edition. Starts from the basics and builds up to more complex systems Covers all aspects of intermolecular and interparticle forces both at the fundamental and applied levels Multidisciplinary approach: bringing together and unifying phenomena from different fields This new edition has an expanded Part III and new chapters on non-equilibrium (dynamic) interactions, and tribology (friction forces)
Download or read book Structure And Dynamics Of Materials In The Mesoscopic Domain Proceedings Of The Fourth Royal Society unilever Indo uk Forum In Materials Science And Engineering written by B D Kulkarni and published by World Scientific. This book was released on 1999-10-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mesoscopic domain encompasses structures that are best described in terms of the time and length scales which lie between the two extremes of the molecular and the phenomenological description of materials. Important examples of such structures are self-assemblies, emulsions, gels, colloids aggregates and macromolecules networks. Discussing the key advances made in recent years in our understanding of both equilibrium and dynamic aspects of mesoscopic structures, most talks at the conference were given by world class researchers in the field, who included, among others, Prof J S Higgins, CBE, FRS (Imperial College, London), Prof D Frenkel (FOM, Amsterdam), Prof M E Cates (Edinburgh), Prof R C Ball (Warwick), Prof S Ramaswamy (Indian Institute of Science, Bangalore), Prof R Pandit (Bangalore), Dr J A Yeomans (Oxford), Prof S Puri (JNU, New Delhi), Dr D Langevin (CRPP, Bordeaux), and Prof W G M Agterof (Unilever Research, Vlaardingen).
Download or read book Physics and Chemistry of Interfaces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.
Download or read book Polymer Science A Comprehensive Reference written by and published by Newnes. This book was released on 2012-12-05 with total page 7752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progress in polymer science is revealed in the chapters of Polymer Science: A Comprehensive Reference, Ten Volume Set. In Volume 1, this is reflected in the improved understanding of the properties of polymers in solution, in bulk and in confined situations such as in thin films. Volume 2 addresses new characterization techniques, such as high resolution optical microscopy, scanning probe microscopy and other procedures for surface and interface characterization. Volume 3 presents the great progress achieved in precise synthetic polymerization techniques for vinyl monomers to control macromolecular architecture: the development of metallocene and post-metallocene catalysis for olefin polymerization, new ionic polymerization procedures, and atom transfer radical polymerization, nitroxide mediated polymerization, and reversible addition-fragmentation chain transfer systems as the most often used controlled/living radical polymerization methods. Volume 4 is devoted to kinetics, mechanisms and applications of ring opening polymerization of heterocyclic monomers and cycloolefins (ROMP), as well as to various less common polymerization techniques. Polycondensation and non-chain polymerizations, including dendrimer synthesis and various "click" procedures, are covered in Volume 5. Volume 6 focuses on several aspects of controlled macromolecular architectures and soft nano-objects including hybrids and bioconjugates. Many of the achievements would have not been possible without new characterization techniques like AFM that allowed direct imaging of single molecules and nano-objects with a precision available only recently. An entirely new aspect in polymer science is based on the combination of bottom-up methods such as polymer synthesis and molecularly programmed self-assembly with top-down structuring such as lithography and surface templating, as presented in Volume 7. It encompasses polymer and nanoparticle assembly in bulk and under confined conditions or influenced by an external field, including thin films, inorganic-organic hybrids, or nanofibers. Volume 8 expands these concepts focusing on applications in advanced technologies, e.g. in electronic industry and centers on combination with top down approach and functional properties like conductivity. Another type of functionality that is of rapidly increasing importance in polymer science is introduced in volume 9. It deals with various aspects of polymers in biology and medicine, including the response of living cells and tissue to the contact with biofunctional particles and surfaces. The last volume is devoted to the scope and potential provided by environmentally benign and green polymers, as well as energy-related polymers. They discuss new technologies needed for a sustainable economy in our world of limited resources. Provides broad and in-depth coverage of all aspects of polymer science from synthesis/polymerization, properties, and characterization methods and techniques to nanostructures, sustainability and energy, and biomedical uses of polymers Provides a definitive source for those entering or researching in this area by integrating the multidisciplinary aspects of the science into one unique, up-to-date reference work Electronic version has complete cross-referencing and multi-media components Volume editors are world experts in their field (including a Nobel Prize winner)
Download or read book Papers Presented at the Meeting written by American Chemical Society. Division of Polymer Chemistry and published by . This book was released on 1990 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Advanced Sustainable Nanomaterials and Their Related Nanocomposites at the Bio Nano Interface written by Niranjan Karak and published by Elsevier. This book was released on 2019-07-30 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics of Advanced Sustainable Nanomaterials and Their Related Nanocomposites at the Bio-Nano Interface highlights the most recent research findings (conducted over the last 5-6 years) on the dynamics of nanomaterials, including their multifaceted, advanced applications as sustainable materials. In addition, special attributes of these materials are discussed from a mechanistic and application point-of-view, including their sustainability and interfacial interactions at the bio-nano interface and different applications. This book presents an important reference resource on advanced sustainable nanomaterials for chemical, nano-, and materials technologists who are looking to learn more about advanced nanocomposites with sustainable attributes. Finally, the book examines the emerging market for sustainable materials and their advanced applications, with a particular focus on the bio-nano interface and their future outlook. Features detailed information on the fundamentals of bio-nano interfacial interactions in sustainable nanomaterials Includes advanced applications of these materials that will help the end user select the appropriate materials for their desired application Features extensive information on the dynamics of these materials, helping the end user extend their work into new applications
Download or read book Trends in Colloid and Interface Science V written by M. Corti and published by Springer. This book was released on 2007-12-11 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proteins at Interfaces II written by and published by . This book was released on 1995 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 1248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Giant Molecules written by A. I?U. Grosberg and published by World Scientific. This book was released on 2011 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: ?? Giant molecules are important in our everyday life. But, as pointed out by the authors, they are also associated with a culture. What Bach did with the harpsichord, Kuhn and Flory did with polymers. We owe a lot of thanks to those who now make this music accessible ??Pierre-Gilles de GennesNobel Prize laureate in Physics(Foreword for the 1st Edition, March 1996)This book describes the basic facts, concepts and ideas of polymer physics in simple, yet scientifically accurate, terms. In both scientific and historic contexts, the book shows how the subject of polymers is fascinating, as it is behind most of the wonders of living cell machinery as well as most of the newly developed materials. No mathematics is used in the book beyond modest high school algebra and a bit of freshman calculus, yet very sophisticated concepts are introduced and explained, ranging from scaling and reptations to protein folding and evolution. The new edition includes an extended section on polymer preparation methods, discusses knots formed by molecular filaments, and presents new and updated materials on such contemporary topics as single molecule experiments with DNA or polymer properties of proteins and their roles in biological evolution.
