Download or read book Dynamic and Static Testing of Nine Drilled Shafts at Texas A M University Geotechnical Research Sites written by Marc Ballouz and published by . This book was released on 1991 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Geotechnical Engineering written by and published by . This book was released on 1994 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book Geo frontiers 2011 written by and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock socketed Shafts for Highway Structure Foundations written by John P. Turner and published by Transportation Research Board. This book was released on 2006 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 360: Rock-Socketed Shafts for Highway Structure Foundations explores current practices pertaining to each step of the design process, along with the limitations; identifies emerging and promising technologies; examines the principal challenges in advancing the state of the practice; and investigates future developments and potential improvements in the use and design of rock-socketed shafts.
Download or read book Predicted and Measured Behavior of Five Spread Footings on Sand written by J.-L. Briaud and published by . This book was released on 1994 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains the results of a full scale load testing program used to predict and measure the behaviour of five spread footings on sand. This title presents the data upon which all predictions are based; describes methodologies and judgments used to make the predictions; and also summarizes the predictions and compares predicted responses.
Download or read book The Deep Mixing Method written by Masaki Kitazume and published by CRC Press. This book was released on 2013-02-21 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d
Download or read book Load and Resistance Factor Design LRFD for Deep Foundations written by Samuel G. Paikowsky and published by Transportation Research Board. This book was released on 2004 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction and research approach -- Findings -- Interpretation, appraisal, and applications -- Conclusions and suggested research -- Bibliography -- Appendixes.
Download or read book Subsurface Conditions written by Keith Turner and published by Springer. This book was released on 2008-01-26 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterisation of the shallow subsurface has gained in importance as civil and geotechnical engineering and environmental applications have become more dependent on a precise definition of geomechanical and geohydrological properties. A better understanding of the subsurface conditions offers wide-ranging benefits to governments, industry and individual citizens. Subsurface geological modelling became an economic and technologic reality in the late 1980's, when competing 3-D geoscientific information systems were the subject of considerable research and evaluation, especially by the petroleum exploration industry. Investigations in the shallow subsurface impose additional requirements that have only recently become technically and economically achievable. The very shallow urban underground environment, where many infrastructure and utilities elements are located, presents the most difficult characterisation problems. Subsurface modelling techniques have matured, along with modern data base concepts. The evolution of the Internet and Web-browser technologies has expanded information transmission and dissemination capabilities. Subsurface models are being integrated with decision-support systems to provide predictions of technical and economic performance. Yet even the most sophisticated of these models leave some uncertainty in geologic interpretation. A variety of techniques for assessing uncertainty have been developed and are being evaluated.
Download or read book Basics of Foundation Design written by Bengt Fellenius and published by Lulu.com. This book was released on 2017-03-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.
Download or read book Cone Penetration Testing written by Paul W. Mayne and published by Transportation Research Board. This book was released on 2007 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: NCHRP synthesis 368 explores the current practices of departments of transportation associated with cone penetration testing (CPT). The report examines cone penetrometer equipment options; field testing procedures; CPT data presentation and geostratigraphic profiling; CPT evaluation of soil engineering parameters and properties; CPT for deep foundations, pilings, shallow foundations, and embankments; and CPT use in ground modifications and difficult ground conditions.
Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.
Download or read book Smart Cement written by Cumaraswamy Vipulanandan and published by CRC Press. This book was released on 2021-07-29 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over three billion metric tons of cement are produced annually worldwide, making concrete the most extensively used construction material. Self-sensing, or smart, cement allows real-time monitoring of performance through the entire service life of a concrete structure, for the detection of changing stresses, contamination, excessive temperature, gas leaks and pre-seismic activity. This is achieved by adding a very small proportion of conductive or semi-conductive fibers, such as carbon fibers to the bulk cement, making it piezoresistive, and enabling changes in the concrete’s electrical resistivity in response to shear stress and strain to be monitored. This state-of-the-art reference work presents experimental results with a realistic theoretical framework, for cement manufactures, concrete technologists and contractors as well as researchers.
Download or read book IFCEE 2015 written by Magued Iskander and published by . This book was released on 2015 with total page 2845 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NCHRP Synthesis 360 written by John Turner and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
