Download or read book Dynamic Analysis of Petri Net Based Discrete Systems written by Andrei Karatkevich and published by Springer Science & Business Media. This book was released on 2007-07-05 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of modern digital hardware systems and of complex software systems is almost always connected with parallelism. For example, execution of an object-oriented p- gram can be considered as parallel functioning of the co-operating objects; all modern operating systems are multitasking, and the software tends to be multithread; many complex calculation tasks are solved in distributed way. But designers of the control systems probably have to face parallelism in more evident and direct way. Controllers rarely deal with just one controlled object. Usually a system of several objects is to be controlled, and then the control algorithm naturally turns to be parallel. So, classical and very deeply investigated model of discrete device, Finite State Machine, is not expressive enough for the design of control devices and systems. Theoretically in most of cases behavior of a controller can be described by an FSM, but usually it is not convenient; such FSM description would be much more complex, than a parallel specification (even as a network of several communicating FSMs).
Download or read book Dynamic Analysis of Petri Net Based Discrete Systems written by Andrei Karatkevich and published by Springer Science & Business Media. This book was released on 2007-04-27 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of modern digital hardware systems and of complex software systems is almost always connected with parallelism. For example, execution of an object-oriented p- gram can be considered as parallel functioning of the co-operating objects; all modern operating systems are multitasking, and the software tends to be multithread; many complex calculation tasks are solved in distributed way. But designers of the control systems probably have to face parallelism in more evident and direct way. Controllers rarely deal with just one controlled object. Usually a system of several objects is to be controlled, and then the control algorithm naturally turns to be parallel. So, classical and very deeply investigated model of discrete device, Finite State Machine, is not expressive enough for the design of control devices and systems. Theoretically in most of cases behavior of a controller can be described by an FSM, but usually it is not convenient; such FSM description would be much more complex, than a parallel specification (even as a network of several communicating FSMs).
Download or read book Control of Discrete Event Systems written by Carla Seatzu and published by Springer. This book was released on 2012-07-27 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Discrete-event Systems provides a survey of the most important topics in the discrete-event systems theory with particular focus on finite-state automata, Petri nets and max-plus algebra. Coverage ranges from introductory material on the basic notions and definitions of discrete-event systems to more recent results. Special attention is given to results on supervisory control, state estimation and fault diagnosis of both centralized and distributed/decentralized systems developed in the framework of the Distributed Supervisory Control of Large Plants (DISC) project. Later parts of the text are devoted to the study of congested systems though fluidization, an over approximation allowing a much more efficient study of observation and control problems of timed Petri nets. Finally, the max-plus algebraic approach to the analysis and control of choice-free systems is also considered. Control of Discrete-event Systems provides an introduction to discrete-event systems for readers that are not familiar with this class of systems, but also provides an introduction to research problems and open issues of current interest to readers already familiar with them. Most of the material in this book has been presented during a Ph.D. school held in Cagliari, Italy, in June 2011.
Download or read book Supervisory Control of Discrete Event Systems Using Petri Nets written by John O. Moody and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supervisory Control of Discrete Event Systems Using Petri Nets presents a novel approach to its subject. The concepts of supervisory control and discrete event systems are explained, and the background material on general Petri net theory necessary for using the book's control techniques is provided. A large number of examples is used to illustrate the concepts and techniques presented in the text, and there are plenty of references for those interested in additional study or more information on a particular topic. Supervisory Control of Discrete Event Systems Using Petri Nets is intended for graduate students, advanced undergraduates, and practicing engineers who are interested in the control problems of manufacturing, communication and computer networks, chemical process plants, and other high-level control applications. The text is written from an engineering perspective, but it is also appropriate for students of computer science, applied mathematics, or economics. The book contains enough background material to stand alone as an introduction to supervisory control with Petri nets, but it may also be used as a supplemental text in a course on discrete event systems or intelligent autonomous control.
Download or read book Colored Petri Nets for Modeling of Discrete Systems written by Reggie Davidrajuh and published by Springer Nature. This book was released on 2023-12-06 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a practical approach to modeling real-world discrete systems and performing analysis. The theory behind the book is the Colored Petri nets, and the tool used for simulations is general-purpose Petri net simulator (GPenSIM). The theory part is kept to a minimum, and more explanation is given to the GPenSIM functions and how they can be used for modeling, simulation, and performance analysis. Real-world industrial systems possess a large number of resources. Modeling these systems with Petri nets would become a problem as they result in huge Petri net models. This book offers a unique solution to this problem by moving resources away from the Petri net model and treating them as variables in the background. Also, the theory and practice put forward in the book help cost estimation of the systems (e.g., manufacturing subsystems).
Download or read book Petri Nets for Modeling of Large Discrete Systems written by Reggie Davidrajuh and published by Springer Nature. This book was released on 2021-09-21 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a new Modular Petri Net as a solution to the vast Petri net models. It presents some approaches centering around modules (known as “Petri modules”). The goal of this book is to introduce a methodology in which Petri nets are moved to a new level. In this new level, large Petri net models are made of Petri modules, which are independent and run on different computers. This book also contains the literature study on modular Petri nets and definitions for the newer Petri modules. Also, algorithms for extracting Petri modules, and algorithms for connecting Petri modules, and applications are given in this book. Besides, the ideas and algorithms given in this book are implemented in the software General-purpose Petri Net Simulator (GPenSIM). Hence, with the use of this book the readers/users would be able to know that real-life discrete event systems could be modeled, analyzed, and performance-optimized with GPenSIM.
Download or read book Advances in Petri Net written by Tauseef Aized and published by BoD – Books on Demand. This book was released on 2010-09-27 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is full of events which cause, end or affect other events. The study of these events, from a system point of view, is very important. Such systems are called discrete event dynamic systems and are of a subject of immense interest in a variety of disciplines, which range from telecommunication systems and transport systems to manufacturing systems and beyond. There has always been an intense need to formulate methods for modelling and analysis of discrete event dynamic systems. Petri net is a method which is based on a well-founded mathematical theory and has a wide application. This book is a collection of recent advances in theoretical and practical applications of the Petri net method and can be useful for both academia and industry related practitioners.
Download or read book Supervision of Petri Nets written by Geert Stremersch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supervision of Petri Nets presents supervisory control theory for Petri nets with a legal set as the control goal. Petri nets model discrete event systems - dynamic systems whose evolution is completely determined by the occurrence of discrete events. Control laws, which guarantee that the system meets a set of specifications in the presence of uncontrollable and unobservable events, are studied and constructed, using application areas such as automated manufacturing and transportation systems. Supervision of Petri Nets introduces a new and mathematically sound approach to the subject. Existing results are unified by proposing a general mathematical language that makes extensive use of order theoretical ideas, and numerous new results are described, including ready-to-use algorithms that construct supervisory control laws for Petri nets. Supervision of Petri Nets is an excellent reference for researchers, and may also be used as a supplementary text for advanced courses on control theory.
Download or read book Petri Net Synthesis for Discrete Event Control of Manufacturing Systems written by MengChu Zhou and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petri Net Synthesis for Discrete Event Control of Manufacturing Systems develops two essential resource-sharing concepts: parallel and sequential mutual exclusions and theoretical results in Petri synthesis. A parallel mutual exclusion (PME) is defined to model a resource shared by independent distributed processes, and a sequential mutual exclusion is a sequential composition of PMEs, modeling a resource shared by sequentially-related processes. A hybrid synthesis methodology for Petri net models and controllers is proposed using top-down, modular, and bottom-up design ideas and the mutual exclusion theory. An aggregate Petri net model is refined by replacing places and /or transitions with basic design modules which are mathematically and graphically described. Petri net design methods are presented for such buffers as automatic storage and retrieval systems. Using the proposed method synthesizes both Petri net structure and feasible initial markings, guaranteeing that resulting Petri nets have desirable system properties such as freedom from deadlock and cyclic behavior. A Petri net controller is extended to error recovery for automated manufacturing systems. The theory can guarantee that the desired system properties achieved by the original design will be preserved when the controller is augmented to deal with an error in the prescribed methods. Control code has been directly generated from Petri net definitions. The algorithm and implementation details are given for a flexible manufacturing system. Using the approach presented in Petri Net Synthesis for Discrete Event Control of Manufacturing Systems, engineers and research workers can develop their own discrete event control applications and experiments.
Download or read book Technological Innovation for Human Centric Systems written by Luis M. Camarinha-Matos and published by Springer Nature. This book was released on with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prototyping of Concurrent Control Systems Implemented in FPGA Devices written by Remigiusz Wiśniewski and published by Springer. This book was released on 2016-09-30 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on prototyping aspects of concurrent control systems and their further implementation and partial reconfiguration in programmable devices. Further, it lays out a full prototyping flow for concurrent control systems. Based on a given primary specification, a system is described with an interpreted Petri net, which naturally reflects the concurrent and sequential relationships of the design. The book shows that, apart from the traditional option of static configuration of the entire system, the latest programmable devices (especially FPGAs) offer far more sophistication. Partial reconfiguration allows selected parts of the system to be replaced without having to reprogram the entire structure of the device. Approaches to dynamic and static partial reconfiguration of concurrent control systems are presented and described in detail.“/p> The theoretical work is illustrated by examples drawn from various applications, with a milling machine and a traffic-light controller highlighted as representative interpreted Petri nets. Given the ubiquity of concurrent control systems in a huge variety of technological areas including transportation, medicine, artificial intelligence, manufacturing, security and safety and planetary exploration, the innovative software and hardware design methods described here will be of considerable interest to control engineers and systems and circuits researchers in many areas of industry and academia.
Download or read book Computer Aided Systems Theory EUROCAST 2013 written by Roberto Moreno-Díaz and published by Springer. This book was released on 2013-12-12 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNCS 8111 and LNCS 8112 constitute the papers presented at the 14th International Conference on Computer Aided Systems Theory, EUROCAST 2013, held in February 2013 in Las Palmas de Gran Canaria, Spain. The total of 131 papers presented were carefully reviewed and selected for inclusion in the books. The contributions are organized in topical sections on modelling biological systems; systems theory and applications; intelligent information processing; theory and applications of metaheuristic algorithms; model-based system design, verification and simulation; process modeling simulation and system optimization; mobile and autonomous transportation systems; computer vision, sensing, image processing and medical applications; computer-based methods and virtual reality for clinical and academic medicine; digital signal processing methods and applications; mechatronic systems, robotics and marine robots; mobile computing platforms and technologies; systems applications.
Download or read book Enterprise Information Systems written by Slimane Hammoudi and published by Springer. This book was released on 2016-02-02 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains revised papers from the 17th International Conference on Enterprise Information Systems, ICEIS 2015, held in Barcelona, Spain, in April 2015. The 31 papers presented in this volume were carefully reviewed and selected from a total of 327 submissions. The book also contains one full-paper invited talk. The selected papers reflect state-of-the-art research that is oriented toward real-world applications and highlight the benefits of information systems and technology for industry and services. They are organized in topical sections on databases and information systems integration, artificial intelligence and decision support systems, information systems analysis and specification, software agents and Internet computing, human–computer interaction, and enterprise architecture.
Download or read book Sensitivity Analysis of Discrete Event Dynamic Systems by a Petri Net based Perturbation Analysis Method written by Chengche Feng and published by . This book was released on 1993 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Reconfigurable Logic Controllers written by Andrei Karatkevich and published by Springer. This book was released on 2015-12-23 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the original concepts and modern techniques for specification, synthesis, optimisation and implementation of parallel logical control devices. It deals with essential problems of reconfigurable control systems like dependability, modularity and portability. Reconfigurable systems require a wider variety of design and verification options than the application-specific integrated circuits. The book presents a comprehensive selection of possible design techniques. The diversity of the modelling approaches covers Petri nets, state machines and activity diagrams. The preferences of the presented optimization and synthesis methods are not limited to increasing of the efficiency of resource use. One of the biggest advantages of the presented methods is the platform independence, the FPGA devices and single board computers are some of the examples of possible platforms. These issues and problems are illustrated with practical cases of complete control systems. If you expect a new look at the reconfigurable systems designing process or need ideas for improving the quality of the project, this book is a good choice.g process or need ideas for improving the quality of the project, this book is a good choice.
Download or read book Petri Nets in Science and Engineering written by Raul Campos-Rodriguez and published by BoD – Books on Demand. This book was released on 2018-09-19 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of chapters from different areas of science and engineering, where Petri Nets have been shown to be a useful tool for the design and modeling of the problems that arise in such fields. The areas covered in this book include manufacturing systems, authentication and cyber-security, computer architectures, mechanical systems, process mining, control theory and time analysis. The main focus of the chapters was to be illustrative, to help the development of intuitive ideas that may guide the reader to adopt Petri Nets in their scientific or engineering work. However, there are other chapters with deep mathematical basis such as time analysis. Whenever possible, models, graphics and examples illustrate the developed concepts.
Download or read book Intelligent Information and Database Systems written by Ngoc-Thanh Nguyen and published by Springer. This book was released on 2016-03-08 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume proceedings of the ACIIDS 2016 conference, LNAI 9621 + 9622, constitutes the refereed proceedings of the 8th Asian Conference on Intelligent Information and Database Systems, held in Da Nang, Vietnam, in March 2016. The total of 153 full papers accepted for publication in these proceedings was carefully reviewed and selected from 392 submissions. They were organized in topical sections named: knowledge engineering and semantic Web; social networks and recommender systems; text processing and information retrieval; database systems and software engineering; intelligent information systems; decision support and control systems; machine learning and data mining; computer vision techniques; intelligent big data exploitation; cloud and network computing; multiple model approach to machine learning; advanced data mining techniques and applications; computational intelligence in data mining for complex problems; collective intelligence for service innovation, technology opportunity, e-learning, and fuzzy intelligent systems; analysis for image, video and motion data in life sciences; real world applications in engineering and technology; ontology-based software development; intelligent and context systems; modeling and optimization techniques in information systems, database systems and industrial systems; smart pattern processing for sports; and intelligent services for smart cities.
