Download or read book Dynamic Analysis and Control System Design of Automatic Transmissions written by Joel M Maguire and published by SAE International. This book was released on 2013-02-12 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the basic working principle and the mechanical construction of automatic transmissions has not changed significantly, increased requirements for performance, fuel economy, and drivability, as well as the increasing number of gears has made it more challenging to design the systems that control modern automatic transmissions. New types of transmissions—continuously variable transmissions (CVT), dual clutch transmissions (DCT), and hybrid powertrains—have presented added challenges. Gear shifting in today’s automatic transmissions is a dynamic process that involves synchronized torque transfer from one clutch to another, smooth engine speed change, engine torque management, and minimization of output torque disturbance. Dynamic analysis helps to understand gear shifting mechanics and supports creation of the best design for gear shift control systems in passenger cars, trucks, buses, and commercial vehicles. Based on the authors’ graduate-level teaching material, this well-illustrated book relays how the fundamental principles of hydraulics and control systems are applied to today’s automatic transmissions. It opens with coverage of basic automatic transmission mechanics and then details dynamics and controls associated with modern automatic transmissions. Topics covered include: gear shifting mechanics and controls, dynamic models of planetary automatic transmissions, design of hydraulic control systems, learning algorithms for achieving consistent shift quality, torque converter clutch controls, centrifugal pendulum vibration absorbers, friction launch controls, shift scheduling and integrated powertrain controls, continuously variable transmission ratio controls, dual-clutch transmission controls, and more. The book includes many equations and clearly explained examples. Sample Simulink models of various transmission mechanical, hydraulic and control subsystems are also provided. Chapter Two, which covers planetary gear automatic transmissions, includes homework questions, making it ideal for classroom use. In addition to students, new engineers will find the book helpful because it provides the basics of transmission dynamics and control. More experienced engineers will appreciate the theoretical discussions that will help elevate the reader’s knowledge. Although many automatic transmission-related books have been published, most focus on mechanical construction, operation principles, and control hardware. None tie the dynamic analysis, control system design, and analytic investigation of the mechanical, hydraulic, and electronic controls as does this book.
Download or read book Automotive Power Transmission Systems written by Yi Zhang and published by John Wiley & Sons. This book was released on 2018-10-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides technical details and developments for all automotive power transmission systems The transmission system of an automotive vehicle is the key to the dynamic performance, drivability and comfort, and fuel economy. Modern advanced transmission systems are the combination of mechanical, electrical and electronic subsystems. The development of transmission products requires the synergy of multi-disciplinary expertise in mechanical engineering, electrical engineering, and electronic and software engineering. Automotive Power Transmission Systems comprehensively covers various types of power transmission systems of ground vehicles, including conventional automobiles driven by internal combustion engines, and electric and hybrid vehicles. The book covers the technical aspects of design, analysis and control for manual transmissions, automatic transmission, CVTs, dual clutch transmissions, electric drives, and hybrid power systems. It not only presents the technical details of key transmission components, but also covers the system integration for dynamic analysis and control. Key features: Covers conventional automobiles as well as electric and hybrid vehicles. Covers aspects of design, analysis and control. Includes the most recent developments in the field of automotive power transmission systems. The book is essential reading for researchers and practitioners in automotive, mechanical and electrical engineering.
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Advances in Mechanical Engineering written by Alexander N. Evgrafov and published by Springer Nature. This book was released on 2020-11-11 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the 9th conference "Modern Engineering: Science and Education", held at the Peter the Great Saint Petersburg Polytechnic University in June 2020 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.
Download or read book Advances in Gear Theory and Gear Cutting Tool Design written by Stephen P. Radzevich and published by Springer Nature. This book was released on 2022-07-01 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written by a team of leading gear experts from across the globe, including contributions from USA, Germany, Poland, China, Russia, Ukraine, and Belarus. It provides readers with the latest accomplishments in the gear theory and gear cutting tool design. Specialists can apply competencies gained from this book to quality control in gear manufacture, as well as to the conditions of their production. The book begins with a detailed discussion of the kinematics and geometry of geometrically-accurate gears and gear systems. This is followed by an analysis of state-of-the-art gear manufacturing methods with focus on gear finishing operations. Novel designs of gear transmission systems as well as gear theory and gear cutting tool design are also covered.
Download or read book Proceedings of SAE China Congress 2015 Selected Papers written by China Society of Automotive Engineers and published by Springer. This book was released on 2015-11-30 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings gather outstanding papers submitted to the 2015 SAE-China Congress, the majority of which are from China, the biggest car maker as well as most dynamic car market in the world. The book covers a wide range of automotive topics, presenting the latest technical achievements in the industry. Many of the approaches presented can help technicians to solve the practical problems that most affect their daily work.
Download or read book Modeling and Optimal Control of Heavy Duty Powertrains written by Vaheed Nezhadali and published by Linköping University Electronic Press. This book was released on 2016-05-30 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy duty powertrains are complex systems with components from various domains, different response times during transient operations and different efficient operating ranges. To ensure efficient transient operation of a powertrain, e.g. with low fuel consumption or short transient duration, it is important to come up with proper control strategies. In this dissertation, optimal control theory is used to calculate and analyze efficient heavy duty powertrain controls during transient operations in different applications. This is enabled by first developing control ready models, usable for multi-phase optimal control problem formulations, and then using numerical optimal control methods to calculate the optimal transients. Optimal control analysis of a wheel loader operating in a repetitive loading cycle is the first studied application. Increasing fuel efficiency or reducing the operation time in such repetitive loading cycles sums up to large savings over longer periods of time. Load lifting and vehicle traction consume almost all of the power produced by a diesel engine during wheel loader operation. Physical models are developed for these subsystems where the dynamics are described by differential equations. The model parameters are tuned and fuel consumption estimation is validated against measured values from real wheel loader operation. The sensitivity of wheel loader trajectory with respect to constrains such as the angle at which the wheel loader reaches the unloading position is also analyzed. A time and fuel optimal trajectory map is calculated for various unloading positions. Moreover, the importance of simultaneous optimization of wheel loader trajectory and the component transients is shown via a side to side comparison between measured fuel consumption and trajectories versus optimal control results. In another application, optimal control is used to calculate efficient gear shift controls for a heavy duty Automatic Transmission system. A modeling and optimal control framework is developed for a nine speed automatic transmission. Solving optimal control problems using the developed model, time and jerk efficient transient for simultaneous disengagement of off-going and engagement of in-coming shift actuators are obtained and the results are analyzed. Optimal controls of a diesel-electric powertrain during a gear shift in an Automated Manual Transmission system are calculated and analyzed in another application of optimal control. The powertrain model is extended by including driveline backlash angle as an extra state in the system. This is enabled by implementation of smoothing techniques in order to describe backlash dynamics as a single continuous function during all gear shift phases. Optimal controls are also calculated for a diesel-electric powertrain corresponding to a hybrid bus during a tip-in maneuver. It is shown that for optimal control analysis of complex powertrain systems, minimizing only one property such as time pushes the system transients into extreme operating conditions far from what is achievable in real applications. Multi-objective optimal control problem formulations are suggested in order to obtain a compromise between various objectives when analyzing such complex powertrain systems.
Download or read book Automotive Transmissions written by Yong Chen and published by Springer Nature. This book was released on 2020-07-30 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to the theory, design and applications of automotive transmissions. It covers multiple categories, e.g. AT, AMT, CVT, DCT and transmissions for electric vehicles, each of which has its own configuration and characteristics. In turn, the book addresses the effective design of transmission gear ratios, structures and control strategies, and other topics that will be of particular interest to graduate students, researchers and engineers. Moreover, it includes real-world solutions, simulation methods and testing procedures. Based on the author’s extensive first-hand experience in the field, the book allows readers to gain a deeper understanding of vehicle transmissions.
Download or read book Electronic Transmission Controls written by Ronald K Jurgen and published by SAE International. This book was released on 2000-06-10 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of the automotive transmission has changed rapidly in the last decade, partly due to the advantages of highly sophisticated electronic controls. This evolution has resulted in modern automatic transmissions that offer more control, stability, and convenience to the driver. Electronic Transmission Controls contains 68 technical papers from SAE and other international organizations written since 1995 on this rapidly growing area of automotive electronics. This book breaks down the topic into two sections. The section on Stepped Transmissions covers recent developments in regular and 4-wheel drive transmissions from major auto manufacturers including DaimlerChrysler, General Motors, Toyota, Honda, and Ford. Technology covered in this section includes: smooth shift control; automatic transmission efficiency; mechatronic systems; fuel saving technologies; shift control using information from vehicle navigation systems; and fuzzy logic control. The section on Continuously Variable Transmissions presents papers that demonstrate that CVTs offer better efficiency than conventional transmissions. Technologies covered in this section include: powertrain control; fuel consumption improvement; development of a 2-way clutch system; internal combustion engines with CVTs in passenger cars; control and shift strategies; and CVT application to hybrid powertrains. The book concludes with a chapter on the future of electronic transmissions in automobiles.
Download or read book Automotive NVH Technology written by Anton Fuchs and published by Springer. This book was released on 2015-10-31 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents seven chapters examining selected noise, vibration and harshness (NVH) topics that are highly relevant for automotive vehicle development. These include applications following the major trends toward increased passenger comfort, vehicle electrification and lightweight design. The authors of the seven chapters, all of which are experts from the automotive industry and academia, present the foremost challenges and potential solutions in this demanding field. Among others, applications for sound optimization in downsized engines, noise optimization in electric powertrains, weight reduction options for exhaust systems, porous materials description, and the vibro-acoustic analysis of geared systems are discussed.
Download or read book Design Practices passenger Car Automatic Transmissions written by and published by SAE International. This book was released on 1994 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1962, with a second edition in 1973, and a revised second edition in 1988 (as AE-5). A compendium of the latest current practices of transmission engineering, for both experienced and novice transmission design engineers. Design calculations are included wherever possible. This ed
Download or read book Energy Research Abstracts written by and published by . This book was released on 1981 with total page 1740 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2007 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Transmissions written by Harald Naunheimer and published by Springer Science & Business Media. This book was released on 2010-11-09 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a full account of the development process for automotive transmissions. Main topics: - Overview of the traffic – vehicle – transmission system - Mediating the power flow in vehicles - Selecting the ratios - Vehicle transmission systems - basic design principles - Typical designs of vehicle transmissions - Layout and design of important components, e.g. gearshifting mechanisms, moving-off elements, pumps, retarders - Transmission control units - Product development process, Manufacturing technology of vehicle transmissions, Reliability and testing The book covers manual, automated manual and automatic transmissions as well as continuously variable transmissions and hybrid drives for passenger cars and commercial vehicles. Furthermore, final drives, power take-offs and transfer gearboxes for 4-WD-vehicles are considered. Since the release of the first edition in 1999 there have been a lot of changes in the field of vehicles and transmissions. About 40% of the second edition’s content is new or revised with new data.
Download or read book Design Practices written by SAE Transmission Committee. Design Standards Subcommittee and published by . This book was released on 1962 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Estimation and Control of Automotive Drivetrains written by Hong Chen and published by Springer Science & Business Media. This book was released on 2013-12-30 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Estimation and Control of Automotive Drivetrains discusses the control problems involved in automotive drivetrains, particularly in hydraulic Automatic Transmission (AT), Dual Clutch Transmission (DCT) and Automated Manual Transmission (AMT). Challenging estimation and control problems, such as driveline torque estimation and gear shift control, are addressed by applying the latest nonlinear control theories, including constructive nonlinear control (Backstepping, Input-to-State Stable) and Model Predictive Control (MPC). The estimation and control performance is improved while the calibration effort is reduced significantly. The book presents many detailed examples of design processes and thus enables the readers to understand how to successfully combine purely theoretical methodologies with actual applications in vehicles. The book is intended for researchers, PhD students, control engineers and automotive engineers. Hong Chen is a professor at the State Key Laboratory of Automotive Simulation and Control, and the Department of Control Science and Engineering at Jilin University. Bingzhao Gao is an associate professor at the State Key Laboratory of Automotive Simulation and Control at Jilin University.
Download or read book Design and Analysis of Control Systems written by Arthur G.O. Mutambara and published by CRC Press. This book was released on 1999-06-23 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to inspire and cultivate the ability to design and analyze feasible control algorithms for a wide range of engineering applications, this comprehensive text covers the theoretical and practical principles involved in the design and analysis of control systems. From the development of the mathematical models for dynamic systems, the author shows how they are used to obtain system response and facilitate control, then addresses advanced topics, such as digital control systems, adaptive and robust control, and nonlinear control systems.
