Download or read book Structural Adhesive Joints written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2020-09-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely book on structural adhesives joints showcases all the pertinent topics and will be of immense value to scientists and engineers in many industries. Most structures are comprised of a number of individual parts or components which have to be connected to form a system with integral load transmission path. The structural adhesive bonding represents one of the most enabling technologies to fabricate most complex structural configurations involving advanced materials (e.g. composites) for load-bearing applications. Quite recently there has been a lot of activity in harnessing nanotechnology (use of nanomaterials) in ameliorating the existing or devising better performing structural adhesives. The 10 chapters by subject matter experts look at the following issues: Surface preparation for structural adhesive joints (SAJ) Use of nanoparticles in enhancing performance of SAJ Optimization of SAJ Durability aspects of SAJ Debonding of SAJ Fracture mechanics of SAJ Failure analysis of SAJ Damage behavior in functionally graded SAJ Impact, shock and vibration characteristics of composites for SAJ Delamination arrest methods in SAJ
Download or read book Adhesive Joints written by Wulff Possart and published by John Wiley & Sons. This book was released on 2019-02-11 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of adhesive bonding, providing both basic knowledge of polymer adhesives as well as insights into their mechanical and ageing properties. The book is unique in its up-to-date, self-contained summary of recent developments and in its integration of the theory, synthesis and mechanical properties of adhesive joints as well as their applications. Well-structured throughout, the first chapter introduces the initial state of adhesive joints and their formation, while subsequent chapters discuss the ageing and failure as well as the weathering of adhesive joints. In addition the issue of long-term behavior and lifetime predictions are considered. The text is rounded off by a look at future technological advances. The result is an essential reference for a wide range of disciplines
Download or read book Durability of Adhesive Joints written by ASTM Committee D-14 on Adhesives and published by ASTM International. This book was released on 1966 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Adhesive Joints in Engineering written by R. D. Adams and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intention of this book is that it should contain everything an engineer needs to know to be able to design and produce adhesively bonded joints which are required to carry significant loads. The advan tages and disadvantages of bonding are given, together with a sufficient understanding of the necessary mechanics and chemistry to enable the designer to make a sound engineering judgement in any particular case. The stresses in joints are discussed extensively so that the engineer can get sufficient philosophy or feel for them, or can delve more deeply into the mathematics to obtain quantitative solutions even with elasto plastic behaviour. A critical description is given of standard methods of testing adhesives, both destructively and non-destructively. The essen tial chemistry of adhesives and the importance of surface preparation are described and guidance is given for adhesive selection by me ans of check lists. For many applications, there will not be a unique adhesive which alone is suitable, and factors such as cost, convenience, produc tion considerations or familiarity may be decisive. A list of applications is given as examples. The authors wish to increase the confidence of engineers using adhesive bonding in load-bearing applications by the information and experience presented. With increasing experience of adhesives en gineering, design will become more elegant as weH as more fitted to its products.
Download or read book Adhesive Joints written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the International Symposium on Adhesive Joints: Formation, Characteristics and Testing held under the auspices of the Division of Polymer Mater ials:Science and Engineering of the American Chemical Society in Kansas City, MO, September 12-17, 1982. There is a myriad of applications (ranging from aerospace to surgery) where adhesives are used to join different materials, and concomitantly the understanding of the behavior of adhesive joints becomes very important. There are many factors which can influence the behavior of adhesive joints, e.g., substrate preparation, in terfacial aspects, joint design, mode of stress, external environ ment, etc., and in order to understand the joint behavior in a holistic manner, one must take due cognizance of all these germane factors. So this symposium was planned to address not only how to make acceptable bonds but their characterization, durability and testing were also accorded due consideration.
Download or read book Durability of Adhesive Joints written by Committee D-14 Staff and published by . This book was released on 1966-01-01 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesives Technology Handbook written by Sina Ebnesajjad and published by William Andrew. This book was released on 2014-11-26 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide range of industrial applications across sectors including medical applications, automotive/aerospace, packaging, electronics, and consumer goods, this book provides a complete guide to the selection of adhesives, methods of use, industrial applications, and the fundamentals of adhesion. Dr Ebnesajjad examines the selection of adhesives and adhesion methods and challenges for all major groups of substrate including plastics (thermosets and thermoplastics), elastomers, metals, ceramics and composite materials. His practical guidance covers joint design and durability, application methods, test methods and troubleshooting techniques. The science and technology of adhesion, and the principles of adhesive bonding are explained in a way that enhances the reader's understanding of the fundamentals that underpin the successful use and design of adhesives. The third edition has been updated throughout to include recent developments in the industry, with new sections covering technological advances such as nanotechnology, micro adhesion systems, and the replacement of toxic chromate technology. Provides practitioners of adhesion technology with a complete guide to bonding materials successfully Covers the whole range of commonly used substrates including plastics, metals, elastomers and ceramics, explaining basic principles and describing common materials and application techniques Introduces the range of commercially available adhesives and the selection process alongside the science and technology of adhesion
Download or read book Testing Adhesive Joints written by Lucas F.M. da Silva and published by John Wiley & Sons. This book was released on 2012-10-22 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joining techniques such as welding, brazing, riveting and screwing are used by industry all over the world on a daily basis. A further method of joining has also proven to be highly successful: adhesive bonding. Adhesive bonding technology has an extremely broad range of applications. And it is difficult to imagine a product - in the home, in industry, in transportation, or anywhere else for that matter - that does not use adhesives or sealants in some manner. The book focuses on the methodology used for fabricating and testing adhesive and bonded joint specimens. The text covers a wide range of test methods that are used in the field of adhesives, providing vital information for dealing with the range of adhesive properties that are of interest to the adhesive community. With contributions from many experts in the field, the entire breadth of industrial laboratory examples, utilizing different best practice techniques are discussed. The core concept of the book is to provide essential information vital for producing and characterizing adhesives and adhesively bonded joints.
Download or read book Hybrid Adhesive Joints written by Lucas F. M. da Silva and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents treat the material science and mechanical issues of hybrid adhesive bonds which are a combination of adhesive bonding rather than mechanical fasteners. The idea of hybrid joints is to gather the advantages of the different techniques leaving out their problems. Some of the advantages of these joints are a higher static and fatigue strength and a higher stiffness with respect to simple joints, a two-stage cracking process before the final failure and improved durability. The book treats all important kinds of joints which are in use today: weld – adhesive, rivet – adhesive, clinch – adhesive, bolt – adhesive, and adhesive – adhesive. A section dedicated to threadlocking and interference-fit adhesive joints is also included. All sections are treated from a scientific point of view with modeling issues supported by simple coupons testing and a technological point of view where the idea is to present more applied results with practical cases.
Download or read book Strength Prediction of Adhesively Bonded Joints written by Raul D. S. G. Campilho and published by CRC Press. This book was released on 2017-05-25 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesively-bonded joints provide many advantages over conventional mechanical fasteners and are increasingly receiving attention as an alternative to mechanical joints in engineering applications. The traditional fasteners usually result in the cutting of fibers and hence the introduction of stress concentrations, both of which reduce structural integrity. By contrast, bonded joints are more continuous and have potential advantages of strength-to-weight ratio, design flexibility, and ease of fabrication. This book provides an overview of available analytical methods as well as numerical methods.
Download or read book Adhesive Joints Formation Characteristics and Testing written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-27 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second International Symposium on Adhesive Joints: Formation, Characteristics and Testing held in Newark, NJ, May 22-24, 2000. Since the first symposium, held in 1982, there had been tremendous research activity dealing with many aspects of adhesive joints. This volume contains a total of 21 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. The book is divided into three parts: 1) General Papers; 2) Evaluation, Analysis and Testing; and 3) Durability Aspects. The topics covered include: molecular brush concepts in enhancing strength of adhesive joints; factors affecting performance of adhesive joints; substrate preparation and modification; interfacial/interphasial aspects; determination of locus of failure; analysis and evaluation of adhesive joints using various techniques; testing of adhesive joints; stress analysis; application of fracture mechanics; durability aspects; accelerated environmental degradation of adhesive joints; solvent uptake; and adhesives with special characteristics. This volume represents a commentary on the current R&D activity in this arena and it should be of great value and interest to anyone interested in adhesive bonding / adhesive joints. Furthermore, this volume contains a number of excellent review/overview articles, which should be of particular value.
Download or read book Structural Adhesive Joints in Engineering written by Robert D. Adams and published by Springer Science & Business Media. This book was released on 1997-10-31 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of adhesives has many advantages over other methods of fastening. Presenting a smooth exterior, spreading of the load and ease of joining thin or dissimilar materials are all reasons why the use of adhesives for bonding structures is steadily growing and finding new applications. Structural Adhesive Joints in Engineering is a concise guide to adhesive joints within structures, especially those capable of bearing high loads. The book covers all aspects of design, materials selection and testing, including the physical properties and cure-chemistry of structural adhesives and how to select adhesives for particular applications; surface preparation by physical or chemical methods (with or without the use of primers and coupling agents); and new sections on surface analysis and water durability. There is also a detailed guide to stresses in adhesive joints and joint design. Thoroughly revised and updated since the first edition, the Second Edition contains new sections on recent topics of importance, such as water durability. This book contains everyhting an engineer needs to know to be able to design and produce adhesively bonded joints that are required to carry significant loads. Advantages and disadvantages are given, together with a sufficient description of the necessary mechanics and chemistry involved to enable the designer to make a sound engineering judgement in each particular case.
Download or read book Durability of Structural Adhesives written by Anthony Kinloch and published by Springer. This book was released on 1983-10-31 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Special Issue on Durability of Adhesive Joints written by Lucas F. M. Da Silva and published by . This book was released on 2009 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Adhesives written by S.R. Hartshorn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesives in general and structural adhesives in particular are the subjects of much academic interest as well as commercial importance. Structural bonding, as a method of joining, offers a number of advantages over mechanical fastening. However, in order to achieve satisfactory results, the proper adhesive must be selected and the appropriate bonding procedures followed. The purpose of Structural Adhesives: Chemistry and Technology is to review the major classes of structural adhesives and the principles of adhesion and bonding as these relate to structural joints. Each chapter provides an overview of the topic under discussion with a list of references to the relevant literature. In addition to describing the chemistry involved, other aspects of structural adhesive technology are covered, such as formula tion, testing, and end uses. Some structural adhesives, especially epoxies and phenolics, have a long history of successful use and are now widely employed. Others, such as the structural acrylics and cyanoacrylates, are beginning to gain industrial acceptance. Urethanes and anaerobics have limited but important uses, while high-temperature adhesives are still largely in the research and development stage.
Download or read book The Durability of Adhesive Joints written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Joining of Polymer Metal Hybrid Structures written by Sergio T. Amancio Filho and published by John Wiley & Sons. This book was released on 2018-02-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to the concepts of joining technologies for hybrid structures This book introduces the concepts of joining technology for polymer-metal hybrid structures by addressing current and new joining methods. This is achieved by using a balanced approach focusing on the scientific features (structural, physical, chemical, and metallurgical/polymer science phenomena) and engineering properties (mechanical performance, design, applications, etc.) of the currently available and new joining processes. It covers such topics as mechanical fastening, adhesive bonding, advanced joining methods, and statistical analysis in joining technology. Joining of Polymer-Metal Hybrid Structures: Principles and Applications is structured by joining principles, in adhesion-based, mechanical fastened, and direct-assembly methods. The book discusses such recent technologies as friction riveting, friction spot joining and ultrasonic joining. This is used for applications where the original base material characteristics must remain unchanged. Additional sections cover the main principles of statistical analysis in joining technology (illustrated with examples from the field of polymer-metal joining). Joining methods discussed include mechanical fastening (bolting, screwing, riveting, hinges, and fits of polymers and composites), adhesive bonding, and other advanced joining methods (friction staking, laser welding, induction welding, etc.). Provides a combined engineering and scientific approach used to describe principles, properties, and applications of polymer-metal hybrid joints Describes the current developments in design of experiments and statistical analysis in joining technology with emphasis on joining of polymer-metal hybrid structures Covers recent innovations in joining technology of polymer-metal hybrid joints including friction riveting, friction spot joining, friction staking, and ultrasonic joining Principles illustrated by pictures, 3D-schemes, charts, and drawings using examples from the field of polymer-metal joining Joining of Polymer-Metal Hybrid Structures: Principles and Applications will appeal to chemical, polymer, materials, metallurgical, composites, mechanical, process, product, and welding engineers, scientists and students, technicians, and joining process professionals.
