Download or read book Duplex Stainless Steels written by Iris Alvarez-Armas and published by John Wiley & Sons. This book was released on 2013-01-16 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Duplex Stainless Steels (DSSs) are chromium-nickel-molybdenum-iron alloys that are usually in proportions optimized for equalizing the volume fractions of austenite and ferrite. Due to their ferritic-austenitic microstructure, they possess a higher mechanical strength and a better corrosion resistance than standard austenitic steels. This type of steel is now increasing its application and market field due to its very good properties and relatively low cost. This book is a review of the most recent progress achieved in the last 10 years on microstructure, corrosion resistance and mechanical strength properties, as well as applications, due to the development of new grades. Special attention will be given to fatigue and fracture behavior and to proposed models to account for mechanical behavior. Each subject will be developed in chapters written by experts recognized around the international industrial and scientific communities. The use of duplex stainless steels has grown rapidly in the last 10 years, particularly in the oil and gas industry, chemical tankers, pulp and paper as well as the chemical industry. In all these examples, topics like welding, corrosion resistance and mechanical strength properties (mainly in the fatigue domain) are crucial. Therefore, the update of welding and corrosion properties and the introduction of topics like texture effects, fatigue and fracture strength properties, and mechanical behavior modeling give this book specific focus and character.
Download or read book Duplex Stainless Steels written by R Gunn and published by Woodhead Publishing. This book was released on 1997-10-21 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two very successful conferences - in Glasgow and Beaune - were held on duplex stainless steels during the first half of the '90s. This book takes keynote papers from each, and develops and expands them to bring the topics right up to date. There is new material to cover grades, specifications and standards, and the book is fully cross-references and indexed. The first reference book to be published on the increasingly popular duplex stainless steels, it will be widely welcomed by metallurgists, design and materials engineers, oil and gas engineers and anyone involved in materials development and properties. The first reference book on this relatively new engineering material Based on keynote papers from major international contributors Covers grades, standards and specifications
Download or read book Stainless Steels for Design Engineers written by Michael F. McGuire and published by ASM International. This book was released on 2008 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rate of growth of stainless steel has outpaced that of other metals and alloys, and by 2010 may surpass aluminum as the second most widely used metal after carbon steel. The 2007 world production of stainless steel was approximately 30,000,000 tons and has nearly doubled in the last ten years. This growth is occurring at the same time that the production of stainless steel continues to become more consolidated. One result of this is a more widespread need to understand stainless steel with fewer resources to provide that information. The concurrent technical evolution in stainless steel and increasing volatility of raw material prices has made it more important for the engineers and designers who use stainless steel to make sound technical judgments about which stainless steels to use and how to use them.
Download or read book Practical Guidelines for the Fabrication of Duplex Stainless Steels written by International Molybdenum Association and published by . This book was released on 2009 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stainless Steels and Alloys written by Zoia Duriagina and published by BoD – Books on Demand. This book was released on 2019-02-13 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials science is the magic that allows us to change the chemical composition and microstructure of material to regulate its corrosion-mechanical, technological, and functional properties. Five major classes of stainless steels are widely used: ferritic, austenitic, martensitic, duplex, and precipitation hardening. Austenitic stainless steels are extensively used for service down to as low as the temperature of liquid helium (-269oC). This is largely due to the lack of a clearly defined transition from ductile to brittle fracture in impact toughness testing. Steels with ferritic or martensitic structures show a sudden change from ductile (safe) to brittle (unsafe) fracture over a small temperature difference. Even the best of these steels shows this behavior at temperatures higher than -100oC and in many cases only just below zero. Various types of stainless steel are used across the whole temperature range from ambient to 1100oC. This book will be useful to scientists, engineers, masters, graduate students, and students. I hope readers will enjoy this book and that it will serve to create new materials with unique properties.
Download or read book Corrosion Resistance of Stainless Steels written by C.P. Dillon and published by CRC Press. This book was released on 1995-05-04 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work examines the corrosion of stainless steels and similar chromium-bearing nickel-containing higher alloys, detailing various corrosive environments, including atmospheric and fire-side corrosion, corrosion by water and soil, and corrosion caused by particular industrial processes. It presents the acceptable isocorosion parameters of concentration and temperature for over 250 chemicals for which stainless alloys are the preferred materials of construction.
Download or read book High Performance Stainless Steels written by Curtis W. Kovach and published by . This book was released on 2000 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book WELDING METALLURGY AND WELDABILITY OF STAINLESS STEELS written by John C. Lippold and published by . This book was released on 2011-01-01 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: · Professional engineers, technicians, scientists, etc. working in industries where stainless steels are used for construction. This includes the power generation, energy, petrochemical, dairy, medical, electronic, defense, and construction industries.· Advanced undergraduate and graduate level students. Special Features: · Emphasizes solid fundamental underpinnings of the metallurgical principles that govern microstructure evolution and property develpment in welded stainless steels.· Presents many practical examples that demonstrate the application of fundamental metallurgical principles.· Greatly expands and updates what is currently available in other texts and handbooks in the subject matter. About The Book: This book describes the fundamental metallurgical principles that control microstructure and properties of welded stainless steels. It also serves as a practical how to guide that will allow engineers to select the proper alloys, filler metals, heat treatments, and welding conditions to insure that failures are avoided during fabrication and service. This book provides state of the art information on the topic and greatly expands and update what is currently available in other texts and handbooks.
Download or read book Stainless Steel 2000 written by Tom Bell and published by CRC Press. This book was released on 2020-01-31 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Austenitic stainless steels lend themselves to a wide range of applications. However, they normally stiffer from poor wear resistance and do not respond well to traditional surface treatments. This volume. the fruit of a current status seminar, reflects the enormous strides which have been made in the last few years in the study of the expanded austenite phase (also called the S phase) and the development of new surface treatment techniques. As well as the papers presented at the seminar, the book contains selection from related papers and a comprehensive bibliography of the literature on the subject from 1979 to 2000.
Download or read book Practical Handbook of Stainless Steels Nickel Alloys written by Stephen Lamb and published by ASM International(OH). This book was released on 1999 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Iron and Steel written by William F. Hosford and published by Cambridge University Press. This book was released on 2012-04-23 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended both as a resource for engineers and as an introduction to the layman about our most important metal system. After an introduction that deals with the history and refining of iron and steel, the rest of the book examines their physical properties and metallurgy. To elaborate on the importance of iron and steel, we can refer to the fact that modern civilization as we know it would not be possible without it. Steel is essential in the machinery necessary for manufacturing that meets our needs. Even the words themselves have come to suggest strength. Phrases such as 'iron willed', 'iron fisted', 'iron clad', 'iron curtain' and 'pumping iron' imply strength. A 'steely glance' is a stern look. 'A heart of steel' refers to a very hard demeanor. The Russian dictator, Stalin (which means steel in Russian), chose the name to invoke fear in those under him.
Download or read book Alloy Digest Sourcebook written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference documents ferrous alloy development as presented in Alloy Digest since 1952. Its concise data sheet summaries (which run about two pages) provide material composition, properties, heat treatment, fabrication characteristics, product forms, and applications. Following a general overvie
Download or read book Austenitic Stainless Steels written by Wojciech Borek and published by BoD – Books on Demand. This book was released on 2017-12-20 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steel is still one of the fastest growing materials. Today, the austenitic stainless steel with the classic composition of 18% Cr and 8% Ni (grade 304L) is still the most widely used by far in the world. The unique characteristic of stainless steel arises from three main factors. The versatility results from high corrosion resistance, excellent low- and high-temperature properties, high toughness, formability, and weldability. The long life of stainless steels has been proven in service in a wide range of environments, together with low maintenance costs compared to other highly alloyed metallic materials. The retained value of stainless steel results from the high intrinsic value and easy recycling. Stainless steel, especially of austenitic microstructure, plays a crucial role in achieving sustainable development nowadays, so it is also important for further generations.
Download or read book High Nitrogen Steels written by Valentin G. Gavriljuk and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic research and new manufacturing methods have led to high nitrogen steels (HNS), a promising new group of materials for use in advanced applications in mechanical and chemical engineering. The book deals with the atomic structure, constitution, properties, manufacturing and application of martensitic, austenitic, duplex and dualphase steels of superior strength and corrosion resistance. Combining metallurgy and engineering aspects. It gives a detailed overview and presents new results on HNS. The book is intended for scientists as well as technologists, who will find stimulating information.
Download or read book Steel Heat Treatment written by George E. Totten and published by CRC Press. This book was released on 2006-09-28 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of two self-contained volumes belonging to the newly revised Steel Heat Treatment Handbook, Second Edition, this book examines the behavior and processes involved in modern steel heat treatment applications. Steel Heat Treatment: Metallurgy and Technologies presents the principles that form the basis of heat treatment processes while incorporating detailed descriptions of advances emerging since the 1997 publication of the first edition. Revised, updated, and expanded, this book ensures up-to-date and thorough discussions of how specific heat treatment processes and different alloy elements affect the structure and the classification and mechanisms of steel transformation, distortion of properties of steel alloys. The book includes entirely new chapters on heat-treated components, and the treatment of tool steels, stainless steels, and powder metallurgy steel components. Steel Heat Treatment: Metallurgy and Technologies provides a focused resource for everyday use by advanced students and practitioners in metallurgy, process design, heat treatment, and mechanical and materials engineering.
Download or read book The Corrosion of Duplex Stainless Steels written by Roger Francis and published by . This book was released on 2018-04-23 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Duplex stainless steels have been adopted by many industries to varying degrees. They are the workhorse corrosion resistant alloy (CRA) of the oil and gas industry, and are also widely used in the chemical and process industries for their SCC and corrosion resistance
Download or read book Manufacturing and Application of Stainless Steels written by Andrea Di Schino and published by MDPI. This book was released on 2020-04-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels represent a quite interesting material family, both from a scientific and commercial point of view, following to their excellent combination in terms of strength and ductility together with corrosion resistance. Thanks to such properties, stainless steels have been indispensable for the technological progress during the last century and their annual consumption increased faster than other materials. They find application in all these fields requiring good corrosion resistance together with ability to be worked into complex geometries. Despite to their diffusion as a consolidated materials, many research fields are active regarding the possibility to increase stainless steels mechanical properties and corrosion resistance by grain refinement or by alloying by interstitial elements. At the same time innovations are coming from the manufacturing process of such a family of materials, also including the possibility to manufacture them starting from metals powder for 3D printing. The Special Issue scope embraces interdisciplinary work covering physical metallurgy and processes, reporting about experimental and theoretical progress concerning microstructural evolution during processing, microstructure-properties relations, applications including automotive, energy and structural.
