Download or read book Drying of Liquid solid Slurry Droplets written by N. Abuaf and published by . This book was released on 1985 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Industrial Drying written by Arun S. Mujumdar and published by CRC Press. This book was released on 2014-07-11 with total page 1334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Fourth Edition book includes 12 new chapters covering computational fluid dynamic simulation; solar, impingement, and pulse combustion drying; drying of fruits, vegetables, sugar, biomass, and coal; physicochemical aspects of sludge drying; and life-cycle assessment of drying systems. Addressing commonly encountered dryers as well as innovative dryers with future potential, the fully revised text not only delivers a comprehensive treatment of the current state of the art, but also serves as a consultative reference for streamlining industrial drying operations to increase energy efficiency and cost-effectiveness.
Download or read book Dynamics of Multiphase Flows written by Chao Zhu and published by Cambridge University Press. This book was released on 2021-06-17 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Address physical principles and unified theories governing multiphase flows, with methods, applications, and problems.
Download or read book Multiphase Flows with Droplets and Particles Second Edition written by Clayton T. Crowe and published by CRC Press. This book was released on 2011-08-26 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition of Multiphase Flow with Droplets and Particles, there have been significant advances in science and engineering applications of multiphase fluid flow. Maintaining the pedagogical approach that made the first edition so popular, this second edition provides a background in this important area of fluid mechanics to those new to the field and a resource to those actively involved in the design and development of multiphase systems. See what’s new in the Second Edition: Chapter on the latest developments in carrier-phase turbulence Extended chapter on numerical modeling that includes new formulations for turbulence and Reynolds stress models Review of the fundamental equations and the validity of the traditional "two-fluid" approach Expanded exercises and a solutions manual A quick look at the table of contents supplies a snapshot of the breadth and depth of coverage found in this completely revised and updated text. Suitable for a first-year graduate (5th year) course as well as a reference for engineers and scientists, the book is clearly written and provides an essential presentation of key topics in the study of gas-particle and gas-droplet flows.
Download or read book Handbook of Industrial Drying Second Edition Revised and Expanded written by A. S. Mujumdar and published by CRC Press. This book was released on 1995-02-22 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental aspects, drying in various industrial sectors: drying of solids, experimental techniques, basic process calculations, transportproperties in the drying solids, rotary drying, horizontal vacuum rotary dryers, fluidized bed drying drum dryers, industrial spray drying, freeze drying, microwave and dielectric drying, solar drying, spouted bed drying, impingement drying, flash drying, conveyor dryers, impinging stream dryers, infrared drying, drying of foodstuffs, agricultural products, fruits and vegetables, evaporation and spray drying in the dairy industry.
Download or read book Dry Scrubbing Technologies for Flue Gas Desulfurization written by Barbara Toole-O'Neil and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dry sulfurization processes offer the significant advantages of low capital and low operating costs when compared to wet desulfurization. They hold great potential for the economical reduction of sulfur emissions from power utilities that use high-sulfur coal. Dry Scrubbing Technologies for Flue Gas Desulfurization represents a body of research that was sponsored by the State of Ohio's Coal Development Office for the development of technologies that use coal in an economic, environmentally-sound manner. One of the project's major goals was the development of dry, calcium-based sorption processes for removing sulfur dioxide from the combustion gases produced by high-sulfur coal. Dry Scrubbing Technologies for Flue Gas Desulfurization highlights a number of fundamental research findings that have had a significant and lasting impact in terms of scientific understanding. For example, the experimental investigation of the upper-furnace sulfur capture obtained time-resolved kinetic data in less than 100 millisecond time-scales for the first time ever, thereby revealing the true nature of the ultra-fast and overlapping phenomena. This was accomplished through the development of a unique entrained flow reactor system. The authors also identify a number of important areas for future research, including reaction mechanisms, sorbent material, transport effects, modeling, and process development. Dry Scrubbing Technologies for Flue Gas Desulfurization will appeal to both chemical and environmental engineers who examine different ways touse coal in a more environmentally benign manner. It will make an essential reference for air pollution control researchers from coal, lime, cement, and utility industries; for government policy-makers and environmental regulatory agencies; and for those who teach graduate courses in environmental issues, pollution control technologies, and environmental policy.
Download or read book Fluid Dynamics and Transport of Droplets and Sprays written by W. A. Sirignano and published by Cambridge University Press. This book was released on 1999-07-28 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative review of the science and technology of droplets and sprays.
Download or read book Transport Phenomena In Combustion written by SH Chan and published by Taylor & Francis. This book was released on 2024-09-06 with total page 1862 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set presents the proceedings from the 8th International Symposium on Transport Phenomena in Combustion. There are more than 150 chapters that provide an extensive review of topics such as complete numerical simulation of combustion and heat transfer in furnaces and boilers, the interaction of combustion and heat transfer in porous media for low emission, high efficiency applications, industrial combustion technology, experimental and diagnostic methods and active combustion control, and fire research, internal combustion engine, Nox and soot emission.
Download or read book Droplets and Sprays Simple Models of Complex Processes written by Sergei S. Sazhin and published by Springer Nature. This book was released on 2022-06-28 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book acts as a guide to simple models that describe some of the complex fluid dynamics, heat/mass transfer and combustion processes in droplets and sprays. Attention is focused mainly on the use of classical hydrodynamics, and a combination of kinetic and hydrodynamic models, to analyse the heating and evaporation of mono- and multi-component droplets. The models were developed for cases when small and large numbers of components are present in droplets. Some of these models are used for the prediction of time to puffing/micro-explosion of composite water/fuel droplets — processes that are widely used in combustion devices to stimulate disintegration of relatively large droplets into smaller ones. The predictions of numerical codes based on these models are validated against experimental results where possible. In most of the models, droplets are assumed to be spherical; some preliminary results of the generalisation of these models to the case of non-spherical droplets, approximating them as spheroids, are presented.
Download or read book Drying 85 written by Ryozo Toei and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a pleasure to present this volume consisting of a selection of papers presented at the 4th International Drying Symposium (IDS) held in Kyoto, July 9-12, 1984, under the sponsorship of the Society of Chemi cal Engineers, Japan. This book includes full texts of the ten keynote lectures and several papers which were presented in the technical sessions in the 4th IDS. As editors we had the arduous and unpleasant task of selecting papers for this volume. We were delighted with the high quality manuscripts sub mitted. We are grateful to the authors for their efforts in meeting the manuscript guidelines and also the deadlines. Aside from quality, we have attempted to maintain in this volume a balance of coverage in terms of topics as well as geography. Space restrictions prevented us from presenting all the high quality papers for publication in DRYING 85. Numerous papers of archival interest have been released for general publication in international journals. Several will no doubt appear in Drying Technology - An International Journal. Many others will find their way into other standard engineering journals as well. Over 120 papers from 30 countries were included in the Proceedings volumes distributed to all registrants in Kyoto. Numerous individuals, professional societies and organizations have contributed, directly or indirectly, to the success of the 4th IDS and hence to DRYING 85 as well. We wish to acknowledge in particular the monumental efforts of the Secretary of the 4th IDS, Professor M. Okazaki.
Download or read book Multiphase Flows with Droplets and Particles Third Edition written by Efstathios E. Michaelides and published by CRC Press. This book was released on 2022-12-30 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Flows with Droplets and Particles provides an organized, pedagogical study of multiphase flows with particles and droplets. This revised edition presents new information on particle interactions, particle collisions, thermophoresis and Brownian movement, computational techniques and codes, and the treatment of irregularly shaped particles. An entire chapter is devoted to the flow of nanoparticles and applications of nanofluids. Features Discusses the modelling and analysis of nanoparticles. Covers all fundamental aspects of particle and droplet flows. Includes heat and mass transfer processes. Features new and updated sections throughout the text. Includes chapter exercises and a Solutions Manual for adopting instructors. Designed to complement a graduate course in multiphase flows, the book can also serve as a supplement in short courses for engineers or as a stand-alone reference for engineers and scientists who work in this area.
Download or read book Drying Droplets as a Template for Multi component Solid Particles written by Roger Williams De Souza Lima and published by . This book was released on 2020 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid droplets are one of the major means of generation of solid particles with controlled. These templates are encountered with a variety of industrial processes, among them, spray drying. These tailored structures would meet the demand for particles with controlled properties, like improved kinetics, sustained release or controlled reactivity. The major scientific obstacle is the detailed description of the components distribution inside the droplet during drying, besides prediction of the final particle morphology. An experimental/modeling approach is undertaken in this thesis to understand how the drying conditions and the liquid formulation impact the final structure of the powders. The drying systems studied were sucrose-dextran and lactose-whey protein isolate aqueous solutions. The experimental work was firstly carried out at the lab-scale spray-dryer giving a reference picture of the possible particle morphologies for the drying systems. An experimental set-up was designed and developed to suspend a liquid droplet by a filament, from which the droplet mass variation over time could be accurately measured, giving fundamental insight into the drying process and allowing the analysis of the modification of the solid structures. A novelty explored at the droplet scale with an acoustic levitator was to apply an in situ Raman spectroscopy to assess the evolution of the spatial distribution of two components in drying droplets. Finally, a 2-D droplet drying model using Computational Fluid Dynamics was developed for allowing the assessment of the spatial distribution of the droplet components under a convective drying, until the formation of a crust. A sensitivity analysis was performed in order to show the influence of the experimental conditions on the drying kinetics and the component spatial distribution.
Download or read book Drying Phenomena written by Ibrahim Dincer and published by John Wiley & Sons. This book was released on 2015-10-14 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively covers conventional and novel drying systems and applications, while keeping a focus on the fundamentals of drying phenomena. Presents detailed thermodynamic and heat/mass transfer analyses in a reader-friendly and easy-to-follow approach Includes case studies, illustrative examples and problems Presents experimental and computational approaches Includes comprehensive information identifying the roles of flow and heat transfer mechanisms on the drying phenomena Considers industrial applications, corresponding criterion, complications, prospects, etc. Discusses novel drying technologies, the corresponding research platforms and potential solutions
Download or read book Catalysis of Organic Reactions written by Robert L. Augustine and published by CRC Press. This book was released on 2020-09-10 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete updating of important developments in the study of catalysis as it applies to organic synthesis — with applications in major industrial processes. It covers a broad variety of catalytic processes — both homogeneous and heterogeneous.
Download or read book Handbook of Pharmaceutical Granulation Technology written by Dilip M. Parikh and published by CRC Press. This book was released on 2021-05-11 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical discussions covering granulation and engineering perspectives. Covers new advances in expert systems, process modelling and bioavailability Chapters on emerging technologies in particle engineering Updated Current research and developments in granulation technologies
Download or read book Pollution Prevention written by Louis Theodore and published by CRC Press. This book was released on 1999-12-20 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field of environmental management moves into the future, its focus will be on reducing or eliminating waste pollution streams. Engineers, technicians, and maintenance personnel must develop proficiency and improved understanding of pollution prevention and waste control to cope with the challenges of this important area. Pollution Prevention
Download or read book Flue Gas Desulfurization and Industrial Minerals written by M. Michael Miller and published by . This book was released on 1993 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 4,101 references on FGD [Flue Gas Desulfurization] ... primarily from 1982 through June 1993. Complements the "Flue Gas Desulfurization and Denitrification" bibliography published by the U.S. Dept. of Energy in Jan. 1985. References were located on the Energy, Science and Technology, Pollution Abstracts, and Environmental Bibliography databases. Primarily covers FGD and the use of industrial minerals in the desulfurization process or in by-product utilization and disposal. Emphasizes post-combustion removal of sulfur dioxide through processes such as in-duct injection and wet and dry scrubbing.
