Download or read book Drag Reduction of Complex Mixtures written by Keizo Watanabe and published by Academic Press. This book was released on 2018-06-15 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drag Reduction of Complex Mixtures discusses the concept of drag reduction phenomena in complex mixtures in internal and external flows that are shown experimentally by dividing flow patterns into three categories. The book is intended to support further experiments or analysis in drag reduction. As accurately modeling flow behavior with drag reduction is always complex, and since drag reducing additives or solid particles are mixed in fluids, this book covers these complex phenomena in a concise, but comprehensive manner. Comprehensively addresses a range of drag reduction themes involving different kinds of complex mixtures Provides data to support further experimentation and computer modeling of drag in complex flow Includes an introduction to the nature and characteristics of different kinds of complex mixtures
Download or read book The Flow of Complex Mixtures in Pipes written by George Wheeler Govier and published by . This book was released on 1977 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rheology of Drag Reducing Fluids written by Aroon Shenoy and published by Springer Nature. This book was released on 2020-03-25 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains theoretical derivations and presents expressions for fluid and convective turbulent flow of mildly elastic fluids in various internal and external flow situations involving different types of geometries, such as the smooth/rough circular pipes, annular ducts, curved tubes, vertical flat plates, and channels. Understanding the methodology of the analyses facilitates appreciation for the rationale used for deriving expressions of parameters relevant to the turbulent flow of mildly elastic fluids. This knowledge serves as a driving force for developing new ideas, investigating new situations, and extending theoretical analyses to other unexplored areas of the rheology of mildly elastic drag reducing fluids.The book suits a range of functions--it can be used to teach elective upper-level undergraduate or graduate courses for chemical engineers, material scientists, mechanical engineers, and polymer scientists; guide researchers unexposed to this alluring and interesting area of drag reduction; and serve as a reference to all who want to explore and expand the areas dealt with in this book.
Download or read book Advanced Manufacturing Processes written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2020-03-27 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provided by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.
Download or read book Drag Reduction written by American Institute of Chemical Engineers and published by . This book was released on 1971 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1976 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CRC Handbook of Thermal Engineering written by Raj P. Chhabra and published by CRC Press. This book was released on 2017-11-08 with total page 1649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Handbook of Thermal Engineering, Second Edition, is a fully updated version of this respected reference work, with chapters written by leading experts. Its first part covers basic concepts, equations and principles of thermodynamics, heat transfer, and fluid dynamics. Following that is detailed coverage of major application areas, such as bioengineering, energy-efficient building systems, traditional and renewable energy sources, food processing, and aerospace heat transfer topics. The latest numerical and computational tools, microscale and nanoscale engineering, and new complex-structured materials are also presented. Designed for easy reference, this new edition is a must-have volume for engineers and researchers around the globe.
Download or read book Viscous Drag Reduction in Boundary Layers written by and published by AIAA. This book was released on 1990 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surfactants in Tribology written by Girma Biresaw and published by CRC Press. This book was released on 2014-11-21 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface science and tribology play very critical roles in many industries. Manufacture and use of almost all consumer and industrial products rely on the application of advanced surface and tribological knowledge. The fourth in a series, Surfactants in Tribology, Volume 4 provides an update on research and development activities connecting surfactants and tribological phenomena. Written by renowned subject matter experts, the book demonstrates how improved design of surfactants can be harnessed to control tribological phenomena. Profusely illustrated and copiously referenced, the chapters also discuss novel approaches to control tribological phenomena using surfactants including green surfactants. It also discusses the underlying tribological and surface science issues relevant to many situations in diverse industries. The information in this volume provides a cutting-edge reference connecting the fields of surfactants and tribology as a way forward to novel, enhanced methods of controlling lubrication, friction, and wear. It reflects the latest developments, highlighting the relevance of surfactants in tribological phenomena in a broad range of industries. As we learn more about the connection between surfactants and tribology, new and improved ways to control lubrication, friction, and wear utilizing surfactants will emerge. This book takes us farther on the path towards this goal.
Download or read book Fossil Energy Update written by and published by . This book was released on 1985 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Conveying and Handling of Particulate Solids written by A. Levy and published by Elsevier. This book was released on 2001-10-22 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents comprehensive coverage of the technology for conveying and handling particulate solids. Each chapter covers a different topic and contains both fundamentals and applications. Usually, each chapter, or a topic within a chapter, starts with one of the review papers. Chapter 1 covers the characterization of the particulate materials. Chapter 2 covers the behaviour of particulate materials during storage, and presents recent developments in storage and feeders design and performance. Chapter 3 presents fundamental studies of particulate flow, while Chapters 4 and 5 present transport solutions, and the pitfalls of pneumatic, slurry, and capsule conveying. Chapters 6, 7 and 8 cover both the fundamentals and development of processes for particulate solids, starting from fluidisation and drying, segregation and mixing, and size-reduction and enlargement. Chapter 9 presents environmental aspects and the classification of the particulate materials after they have been handled by one of the above-mentioned processes. Finally, Chapter 10 covers applications and developments of measurement techniques that are the heart of the analysis of any conveying or handling system.
Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.
Download or read book Automotive Fuels Reference Book Fourth Edition written by Paul Richards and published by SAE International. This book was released on 2023-11-15 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The earlier editions of this title have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited latest edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful, This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources, including e-fuels. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. As CO2 is now an important emission there is also discussion regarding low and non-carbon fuels and how they might be used. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures. (ISBN 9781468605785, ISBN 9781468605792, ISBN 9781468605808, DOI 10.4271/9781468605792)
Download or read book Surfactants in Tribology Volume 5 written by Girma Biresaw and published by CRC Press. This book was released on 2017-09-11 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfactants play a critical role in Tribology controlling friction, wear, and lubricant properties such as emulsification, demulsification, bioresistance, oxidation resistance, rust prevention and corrosion resistance. This is a critical topic for new materials and devices particularly those built at the nanoscale. This newest volume will address tribological properties of cutting fluids, lubricant performance related to steel surfaces, biolubricants, and novel materials and ways to reduce friction and wear. Scientists from industrial research and development (R&D) organizations and academic research teams in Asia, Europe, the Middle East and North America will participate in the work.
Download or read book Petroleum Abstracts written by and published by . This book was released on 1991 with total page 1512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Mechanochemistry written by Roman Boulatov and published by Springer. This book was released on 2015-10-17 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry presents critical reviews of the present and future trends in modern chemical research. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field. Review articles for the individual volumes are invited by the volume editors. Readership: research chemists at universities or in industry, graduate students.
Download or read book The Influence of Polymer Additives on Velocity and Temperature Fields written by Bernhard Gampert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium on "The Influence of Polymer Additives on Veloc ity and Temperature Fields" was proposed to the General Assem bly of the International Union of Theoretical and Applied Me chanics (IUTAM) by the "Gesellschaft fur Angewandte Mathematik und Mechanik" (GAMM). The Symposium was held under the auspices of IUTAM in association with the "Deutsche Rheologische Ge sellschaft" (DRG) with responsibility for the organization ly ing with B. Gampert (Universitat-GH-Essen). The main aim of this IUTAM Symposium was to consider the funda mental aspects of the phenomena that occur when small amounts of polymers are added to turbulent flows (turbulent drag re duction) and laminar porous media flows. In particular atten tion was devoted to - the influence of molecular parameters of the polymers and solution properties, especially the elongational viscosity, on turbulent flow and laminar porous media flow; the influence of polymers on the turbulence structure in polymer drag reduction
