Download or read book Down Milling Trimming Process Optimization for Carbon Fiber Reinforced Plastic written by Saiful Bahri Mohamed and published by Springer. This book was released on 2018-08-24 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers recommendations on the milling processes for the carbon fiber reinforced plastic CFRP/Al2024. Due to the anisotropic and non-homogeneous structure of CFRP and the ductile nature of aluminum, the machining of this material is very challenging and causes various types of damage, such as matrix cracking and thermal alterations, fiber pullout and fuzzing during drilling and trimming, which affect the quality of machined surface. The book studies and models the machined surface quality of CFRP/Al2024 using a two-level full factorial design experiment. It describes the processes of trimming using down milling, and statistically and graphically analyzes the influence and interaction of cutting parameters. Lastly, the book presents the optimization of the cutting parameters in order to create a surface texture quality of CFRP/Al2024 to less than 1 μm.

Download or read book Machining Polymer Matrix Composites Tools Techniques and Sustainability written by Cabrera, Francisco Mata and published by IGI Global. This book was released on 2024-05-15 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic scholars engaged in machining polymer matrix composites face challenges due to material property variations, complex structures, and the pursuit of high surface quality. The lack of comprehensive resources further hampers their ability to develop efficient and sustainable machining techniques. Machining Polymer Matrix Composites: Tools, Techniques, and Sustainability, edited by Francisco Mata Cabrera and Issam Hanafi, offers a comprehensive solution. This book provides practical knowledge on tool selection, cutting parameters, surface quality, and tool wear, empowering scholars to overcome the intricacies of machining these materials. With insights into turning, milling, drilling, grinding, and advancements in high-speed and ultrasonic machining, the book equips scholars with a comprehensive toolbox for optimizing their machining techniques. The book goes beyond technique to address environmental impact, covering topics such as energy consumption, waste generation, and emissions. Through case studies, it offers practical applications and valuable insights into the challenges and opportunities of machining polymer matrix composites. This comprehensive solution, encompassing knowledge, practical guidance, and sustainability considerations, empowers academic scholars to achieve high-quality machined components while minimizing their environmental footprint. Regardless of their expertise level, whether beginners seeking fundamental understanding or experienced professionals in need of advanced insights, scholars will find this book an indispensable resource. By covering tool selection, cutting parameters, surface quality, and environmental impact, Machining Polymer Matrix Composites: Tools, Techniques, and Sustainability equips scholars with the necessary tools to excel in machining polymer matrix composites.

Download or read book Proceedings of International Conference in Mechanical and Energy Technology written by Sanjay Yadav and published by Springer Nature. This book was released on 2020-06-01 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed papers from the International Conference on Mechanical and Energy Technologies, which was held on 7–8 November 2019 at Galgotias College of Engineering and Technology, Greater Noida, India. The book reports on the latest developments in the field of mechanical and energy technology in contributions prepared by experts from academia and industry. The broad range of topics covered includes aerodynamics and fluid mechanics, artificial intelligence, nonmaterial and nonmanufacturing technologies, rapid manufacturing technologies and prototyping, remanufacturing, renewable energies technologies, metrology and computer-aided inspection, etc. Accordingly, the book offers a valuable resource for researchers in various fields, especially mechanical and industrial engineering, and energy technologies.

Download or read book Proceedings of Mechanical Engineering Research Day 2019 written by Mohd Fadzli Bin Abdollah and published by Centre for Advanced Research on Energy. This book was released on 2019-08-05 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book is a compilation of papers presented at the 6th Mechanical Engineering Research Day (MERD'19) - Kampus Teknologi UTeM, Melaka, Malaysia on 31 July 2019.

Download or read book Machining and Machinability of Fiber Reinforced Polymer Composites written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-22 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers current advances and practices in machining fibre-reinforced polymer composites under various conventional and nonconventional processes. It presents recent research and practices for effective and efficient machining of difficult-to-cut material, providing the technological ‘know-how’ on delamination-free of drilling, milling, trimming, and other cutting processes on fibre-reinforced polymer composites. It also guides the reader on the selection of optimum machining parameters, tool materials, as well as tool geometry. This book is of interest to academicians, students, researchers, practitioners, and industrialists working in aerospace, automotive, marine, and construction industries.

Download or read book Machinability of Fibre Reinforced Plastics written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-06-16 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Fiber Reinforced Plastics modern technologies for automated, highly productive and cost efficient processing Robots offer cutting-edge and lower-cost solutions than machine tools for bringing molded CFRP parts to their final shapes and sizes

Download or read book Machine Tools Production Systems 2 written by Christian Brecher and published by Springer Nature. This book was released on 2021-11-08 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this volume provides the user with assistance in the selection and design of important machine and frame components. It also provides help with machine design, calculation and optimization of these components in terms of their static, dynamic and thermoelastic behavior. This includes machine installation, hydraulic systems, transmissions, as well as industrial design and guidelines for machine design. The second part of this volume deals with the metrological investigation and assessment of the entire machine tool or its components with respect to the properties discussed in the first part of this volume. Following an overview of the basic principles of measurement and measuring devices, the procedure for measuring them is described. Acceptance of the machine using test workpieces and the interaction between the machine and the machining process are discussed in detail. The German Machine Tools and Manufacturing Systems Compendium has been completely revised. The previous five-volume series has been condensed into three volumes in the new ninth edition with color technical illustrations throughout. This first English edition is a translation of the German ninth edition.

Download or read book Drilling of Polymer Matrix Composites written by Vijayan Krishnaraj and published by Springer Science & Business Media. This book was released on 2013-07-08 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief focus on drilling of polymer matrix composites for aerospace and defence applications. It gives an introduction to machining of polymer composites and discusses drilling as a processing of composites.

Download or read book Machining of Ceramics and Composites written by Jahanmir and published by CRC Press. This book was released on 1999-01-04 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting modern advances in the machining of ceramics and composites, this work offers broadly based, fundamental information for selecting the appropriate machining processes and parameters, developing successful manufacturing strategies, and designing novel machining systems. It focuses on scientific and engineering developments affecting the present and future of machining processes.

Download or read book Fabrication Techniques and Machining Methods of Advanced Composite Materials written by Vikas Dhawan and published by CRC Press. This book was released on 2024-05-02 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabrication Techniques and Machining Methods of Advanced Composite Materials documents the most current inventive developments in the manufacture and machining of sophisticated composite materials. The utilization of cutting-edge engineering materials with exceptional qualities, such as lightweight and long service life, is necessary for the industry to reduce both energy consumption and production/maintenance costs. It provides scientific and technological insights on the fabrication routes of composites. It covers various applications suitable for the aerospace, nuclear, and medical fields and emphasizes advanced machining techniques. The book also highlights some of the top innovations and advances in the fabrication of advanced composite materials and their processing technologies while targeting the latest applications. This reference book is meant to be used as a one-stop resource for academics and manufacturing experts, engineers in related fields, and academic researchers. It encapsulates the current trends of today's fabrication and machining processes for advanced composite materials.

Download or read book Machining Composites Materials written by J. Paulo Davim and published by John Wiley & Sons. This book was released on 2013-10-28 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the application of composite materials hasincreased in various areas of science and technology due to theirspecial properties, namely for use in the aircraft, automotive,defence, aerospace and other advanced industries. Machiningcomposite materials is quite a complex task owing to itsheterogenity, and to the fact that reinforcements are extremelyabrasive. In modern engineering, high demands are placed oncomponents made of composites in relation to their dimensionalprecision as well as their surface quality. Due to these potentialapplications, there is a great need to understand the questionsassociated with machining composite materials. This book aims to provide the fundamentals and the recentadvances in the machining of composite materials (polymers, metalsand ceramics) for modern manufacturing engineering. The three partsof the book cover the machining of polymeric, metal and ceramicmatrix composites. This book can be used as a text book for the final year of anundergraduate engineering course or for those studyingmachining/composites at the postgraduate level. It can also serveas a useful work of reference for academics, manufacturing andmaterials researchers, manufacturing and mechanical engineers, andprofessionals in composite technology and related industries.

Download or read book Dynamics of Machines and Mechanisms Industrial Research written by K.R. Balasubramanian and published by Trans Tech Publications Ltd. This book was released on 2014-07-15 with total page 2910 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2014 International Mechanical Engineering Congress (IMEC-2014), June 13-15, 2014, Tamil Nadu, India. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 501 papers are grouped as follows: Chapter 1: Advanced Material and Manufacturing Processes, Chapter 2: Nanomaterials and Nanotechnology in Machinery, Chapter 3: Dynamics and Applied Mechanics, Chapter 4: Tribology, Chapter 5: Thermodynamics and Thermal Engineering, Fuel and Diesel, Chapter 6: Applied Fluids Mechanics in Design of Machines and Equipment, Chapter 7: Vibration and Control, Chapter 8: Drive Systems of Machines, Mechatronics, Robotics and Control, Chapter 9: Engineering Development on Sustainable Energy, Chapter 10: Labour Safety, Ergonomics, Reliability and Safety of Machines and Mechanisms, Chapter 11: Industrial Engineering

Download or read book Drilling of Composite Materials written by J. Paulo Davim and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the use of composite materials has increased in various areas of science and technology due to their special properties, namely for these application in aircraft, automotive, defence and aerospace industries as well others advanced industries. Drilling is a frequently practised machining process in modern industry owing to the need for component assembly in composite structures. This book aims to provide the research and review studies in drilling of composite materials. The first three chapters provide information on delamination and damage reduction in drilling of composite materials. The following two chapters deal with influence of machining parameters on the delamination. The sixth chapter is focused on modelling of drilling aluminium matrix composites using artificial neural networks. The chapter seventh is dedicated study of analysis of delamination in drilling wood composite medium density fibreboards. Finally, the last chapter of this book is focused on studies on composite drilling - the state of the art. The present research book can be used as for final undergraduate engineering course (for example, mechanical, manufacturing, materials etc) or as a subject on machining/composites at the postgraduate level. Also, this research book can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing, materials and mechanical engineers, professional in composites technology and related industries.

Download or read book Machining of Polymer Composites written by Jamal Ahmad and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume will serve as an indispensable reference and source book for process design, tool and production engineers in composite manufacturing. It provides the reader with a comprehensive treatment of the theory of machining as it applies to fiber reinforced polymer composites. It covers the latest technical advances in the area of machining and tooling, and discusses the applications of fiber reinforced polymer composites in the aircraft and automotive industries.

Download or read book Composites Manufacturing written by Sanjay Mazumdar and published by CRC Press. This book was released on 2001-12-27 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: More and more companies manufacture reinforced composite products. To meet the market need, researchers and industries are developing manufacturing methods without a reference that thoroughly covers the manufacturing guidelines. Composites Manufacturing: Materials, Product, and Process Engineering fills this void. The author presents a fundamental

Download or read book Hybrid Fiber Composites written by Anish Khan and published by John Wiley & Sons. This book was released on 2020-09-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced composites are exceptionally versatile materials whose properties can be tuned to exhibit a variety of favorable properties such as high tensile strength and resistance against wear or chemical and thermal influences. Consequently, these materials are widely used in various industrial fields such as the aircraft, marine, and automobile industry. After an overview of the general structures and properties of hybrid fiber composites, the book focuses on the manufacturing and processing of these materials and their mechanical performance, including the elucidation of failure mechanisms. A comprehensive chapter on the modeling of hybrid fiber composites from micromechanical properties to macro-scale material behavior is followed by a review of applications of these materials in structural engineering, packaging, and the automotive and aerospace industries.

Download or read book Composite Materials written by Luigi Nicolais and published by Springer Science & Business Media. This book was released on 2011-05-18 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Materials presents recent developments and state-of-the-art achievements in the science and technology of composites. It identifies and discusses key and emerging issues for future progress in the multidisciplinary field of composites. By bringing together leading experts and promising innovators from research institutions and academia, Composite Materials highlights unresolved issues and identifies opportunities for long-term research needs to provide the reader with a vision for the future in various fields of application of composite materials. A few of the many future directions highlighted in the book are increasingly multifunctional properties; complex, hybrid and nanoreinforced materials; and tailoring in multiple dimensions and directions. The wider areas covered include, but are not limited to, the following: biomedical engineering, civil engineering, aerospace engineering, automotive engineering, and naval engineering. Composite Materials is designed to increase the reader’s understanding of the state of the art of composite materials in a variety of industrial sectors and to explore future needs and opportunities. It will therefore be of use to professionals working in the composites industry, research centers, and academia, who already have a graduate-level knowledge of composite materials.