Download or read book Comprehensive Dissertation Index written by and published by . This book was released on 1989 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dissertation Abstracts International written by and published by . This book was released on 1986 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book American Doctoral Dissertations written by and published by . This book was released on 1985 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Semiconductor Material and Device Characterization written by Dieter K. Schroder and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques. Readers familiar with the previous two editions will discover a thoroughly revised and updated Third Edition, including: Updated and revised figures and examples reflecting the most current data and information 260 new references offering access to the latest research and discussions in specialized topics New problems and review questions at the end of each chapter to test readers' understanding of the material In addition, readers will find fully updated and revised sections in each chapter. Plus, two new chapters have been added: Charge-Based and Probe Characterization introduces charge-based measurement and Kelvin probes. This chapter also examines probe-based measurements, including scanning capacitance, scanning Kelvin force, scanning spreading resistance, and ballistic electron emission microscopy. Reliability and Failure Analysis examines failure times and distribution functions, and discusses electromigration, hot carriers, gate oxide integrity, negative bias temperature instability, stress-induced leakage current, and electrostatic discharge. Written by an internationally recognized authority in the field, Semiconductor Material and Device Characterization remains essential reading for graduate students as well as for professionals working in the field of semiconductor devices and materials. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Download or read book Optical Properties of Semiconductor Nanostructures written by Marcin L. Sadowski and published by Springer Science & Business Media. This book was released on 2000-06-30 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical methods for investigating semiconductors and the theoretical description of optical processes have always been an important part of semiconductor physics. Only the emphasis placed on different materials changes with time. Here, a large number of papers are devoted to quantum dots, presenting the theory, spectroscopic investigation and methods of producing such structures. Another major part of the book reflects the growing interest in diluted semiconductors and II-IV nanosystems in general. There are also discussions of the fascinating field of photonic crystals. `Classical' low dimensional systems, such as GsAs/GaAlAs quantum wells and heterostructures, still make up a significant part of the results presented, and they also serve as model systems for new phenomena. New materials are being sought, and new experimental techniques are coming on stream, in particular the combination of different spectroscopic modalities.

Download or read book WDM Technologies Passive Optical Components written by Achyut K. Dutta and published by Academic Press. This book was released on 2003-06-04 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The communications industry is at the onset of new expansion of WDM technology necessary to meet the new demand for bandwidth. This is the second of a four reference books that will cover this technology comprehensively with all of the major topics covered by a separate volumes - i.e. active components, passive components, systems and networks. This book is the first which covers all key passive optical components required for current and next generation optical communication systems. World-renowned authors, who are pioneers in their research area, have written the chapters in their area of expertise. The book highlights not only the principle of operation and characteristics of the passive optical components, but also provides an in-depth account of the state-of-the-art system applications.- Helps the reader to choose the right device for a given system application.- Provides the reader with insight and understanding for key passive optical components frequently being / to be used in the optical communication systems, essential building blocks of today's/next generation fiber optic networks.- Allows engineers working in different optical communication areas(i.e. from system to component), to understand the principle and mechanics of each key component they deal with for optical system design.- Covers Planar lightwave circuit (PLC) based router, different optical switches technologies (based on MEMS, thermo-optic, and electro-optic) and different optical amplifier technologies (based on semiconductor optical amplifier, EDFA ,and raman amplifier). - Highlights the operating principle of each component, system applications, and also future opportunities.

Download or read book Electronic Structure of Semiconductor Heterojunctions written by Giorgio Margaritondo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: E se non che di cid son vere prove A nd were it not for the true evidence Per piti e piti autori, che sa, ra. nno Of many authors who will be Per i miei versi nominati altrove, Mentioned elsewhere in my rhyme Non presterei alla penna 10. mana I would not lend my hand to the pen Per nota1' cid ch'io vidi, can temenza And describe my observations, for fear ehe non fosse do. altri casso e van 0; That they would be rejected and in vane; Mala lor chiara. e vera. esperienza But these authors' clear and true experience Mi assicura. nel dir, come persone Encourages me to report, since they Degne di fede ad ogni gra. n sentenza. Should always be trusted for their word. [From" Dittamondo", by Fazio degli UbertiJ Heterojunction interfaces, the interfaces between different semiconducting materi als, have been extensively explored for over a quarter of a century. The justifica tion for this effort is clear - these interfaces could become the building blocks of lllany novel solid-state devices. Other interfaces involving semiconductors are al ready widely used in technology, These are, for example, metal-semiconductor and insulator-semiconductor junctions and hOll1ojunctions. In comparison, the present applications of heterojunction int. erfaces are limited, but they could potentially becOlne lnuch lllore ext. ensive in the neal' future. The path towards the widespread use of heterojunctions is obstructed by several obstacles

Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.

Download or read book Polarization Effects in Semiconductors written by Debdeep Jena and published by Springer Science & Business Media. This book was released on 2008 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polarization Effects in Semiconductors: From Ab Initio Theory to Device Applications presents the latest understanding of the solid state physics, electronic implications and practical applications of the unique spontaneous or pyro-electric polarization charge of wurtzite compound semiconductors, and associated piezo-electric effects in strained thin film heterostructures. These heterostructures are used in wide band gap semiconductor based sensors, in addition to various electronic and opto-electronic semiconductor devices. The book covers the ab initio theory of polarization in cubic and hexagonal semiconductors, growth of thin film GaN, GaN/AlGaN GaAlN/ AlGaInN, and other nitrides, and SiC heterostructures. It discusses the effects of spontaneous and piezoelectric polarization on band diagrams and electronic properties of abrupt and compositionally graded heterostructures, electronic characterization of polarization-induced charge distributions by scanning-probe spectroscopies, and gauge factors and strain effects. In addition, polarization in extended defects, piezo-electric strain/charge engineering, and application to device design and processing are covered. The effects of polarization on the fundamental electron transport properties, and on the basic optical transitions are described. The crucial role of polarization in devices such as high electron mobility transistors (HEMTs) and light-emitting diodes (LEDs) is covered. The chapters are authored by professors and researchers in the fields of physics, applied physics and electrical engineering, who worked for 5 years under the "Polarization Effects in Semiconductors" DOD funded Multi Disciplinary University Research Initiative. This book will be of interest to graduate students and researchers working in the field of wide-bandgap semiconductor physics and their device applications. It will also be useful for practicing engineers in the field of wide-bandgap semiconductor device research and development.

Download or read book Photovoltaic and Photoactive Materials written by Joseph M. Marshall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this NATO Advanced Study Institute (ASI) was to present an up-to-date overview of various current areas of interest in the field of photovoltaic and related photoactive materials. This is a wide-ranging subject area, of significant commercial and environmental interest, and involves major contributions from the disciplines of physics, chemistry, materials, electrical and instrumentation engineering, commercial realisation etc. Therefore, we sought to adopt an inter disciplinary approach, bringing together recognised experts in the various fields while retaining a level of treatment accessible to those active in specific individual areas of research and development. The lecture programme commenced with overviews of the present relevance and historical development of the subject area, plus an introduction to various underlying physical principles of importance to the materials and devices to be addressed in later lectures. Building upon this, the ASI then progressed to more detailed aspects of the subject area. We were also fortunately able to obtain a contribution from Thierry Langlois d'Estaintot of the European Commission Directorate, describing present and future EC support for activities in this field. In addition, poster sessions were held throughout the meeting, to allow participants to present and discuss their current activities. These were supported by what proved to be very effective feedback sessions (special thanks to Martin Stutzmann), prior to which groups of participants enthusiastically met (often in the bar) to identify and agree topics of common interest.

Download or read book Graphene Photonics written by Jia-Ming Liu and published by Cambridge University Press. This book was released on 2018-12-13 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene is a single-layer crystal of carbon, the thinnest two-dimensional material. It has unique electronic and photonic properties.

Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.

Download or read book Physics of Semiconductors written by B. Sapoval and published by Springer Science & Business Media. This book was released on 2003-10-17 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on courses given at the Ecole Polytechnique in France, this book covers not only the fundamental physics of semiconductors, but also discusses the operation of electronic and optical devices based on semiconductors. It is aimed at students with a good background in mathematics and physics, and is equally suited for graduate-level courses in condensed-matter physics as for self-study by engineers interested in a basic understanding of semiconductor devices.

Download or read book Crystal Growth written by A.W. Vere and published by Springer Science & Business Media. This book was released on 1988-05-31 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second in a series of scientific textbooks designed to cover advances in selected research fields from a basic and general viewpoint, so that only limited knowledge is required to understand the significance of recent developments. Further assistance for the non-specialist is provided by the summary of abstracts in Part 2, which includes many of the major papers published in the research field. Crystal Growth of Semiconductor Materials has been the subject of numerous books and reviews and the fundamental principles are now well-established. We are concerned chiefly with the deposition of atoms onto a suitable surface - crystal growth - and the generation of faults in the atomic structure during growth and subsequent cooling to room temperature - crystal defect structure. In this book I have attempted to show that whilst the fundamentals of these processes are relatively simple, the complexities of the interactions involved and the individuality of different materials systems and growth processes have ensured that experimentally verifiable predictions from scientific principles have met with only limited success - good crystal growth remains an art. However, recent advances, which include the reduction of growth temperatures, the reduction or elimination of reactant transport variables and the use of better-controlled energy sources to promote specific reactions, are leading to simplified growth systems.

Download or read book Physics at Surfaces written by Andrew Zangwill and published by Cambridge University Press. This book was released on 1988-03-24 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics at Surfaces is a unique graduate-level introduction to the physics and chemical physics of solid surfaces, and atoms and molecules that interact with solid surfaces. A subject of keen scientific inquiry since the last century, surface physics emerged as an independent discipline only in the late 1960s as a result of the development of ultra-high vacuum technology and high speed digital computers. With these tools, reliable experimental measurements and theoretical calculations could at last be compared. Progress in the last decade has been truly striking. This volume provides a synthesis of the entire field of surface physics from the perspective of a modern condensed matter physicist with a healthy interest in chemical physics. The exposition intertwines experiment and theory whenever possible, although there is little detailed discussion of technique. This much-needed text will be invaluable to graduate students and researchers in condensed matter physics, physical chemistry and materials science working in, or taking graduate courses in, surface science.

Download or read book Compound Semiconductor Photonics written by Chua Soo-Jin and published by CRC Press. This book was released on 2020-03-26 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceeding is a collection of selected papers presented at Symposium O of Compound Semiconductor Photonics in the International Conference on Materials for Advanced Technology (ICMAT), which was held in Singapore from 28 June to 3 July 2009. The symposium covers a wide range of topics from fundamental semiconductor materials study to photonic device fabrication and application. The papers collected are of recent progress in the active and wide range of semiconductor photonics research. They include materials-related papers on III-As/P, III-nitride, quantum dot/wire/dash growth, ZnO, and chalcogenide, and devices-related papers on photonic crystals, VCSEL, quantum dot/dash lasers, LEDs, waveguides, solar cells and heterogeneous integrat

Download or read book The Physics and Fabrication of Microstructures and Microdevices written by Michael J. Kelly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: les Houches This Winter School on "The Physics and Fabrication of Microstructures" originated with a European industrial decision to investigate in some detail the potential of custom-designed microstructures for new devices. Beginning in 1985, GEC and THOMSON started a collaboration on these subjects, supported by an ESPRIT grant from the Commission of the European Com munity. To the outside observer of the whole field, it appears clear that the world effort is very largely based in the United States and Japan. It also appears that cooperation and dissemination of results are very well organised outside Europe and act as a major influence on the development of new concepts and devices. In Japan, a main research programme of the Research and Development for Basic Technology for Future Industries is focused on "Future Electron Devices". In Japan and in the United States, many workshops are organised annually in order to bring together the major specialists in industry and academia, allowing fast dissemination of advances and contacts for setting up cooperative efforts.