Download or read book Doe Fundamentals Handbook Thermodynamics Heat Transfer and Fluid Flow Volume 2 of 3 written by U. S. Department of Energy and published by Lulu.com. This book was released on 2016-05-12 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Thermodynamics, Heat Transfer, and Fluid Flow Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of the thermal sciences. The handbook includes information on thermodynamics and the properties of fluids; the three modes of heat transfer - conduction, convection, and radiation; and fluid flow, and the energy relationships in fluid systems. This information will provide personnel with a foundation for understanding the basic operation of various types of DOE nuclear facility fluid systems.
Download or read book Doe Fundamentals Handbook Thermodynamics Heat Transfer and Fluid Flow Volume 1 of 3 written by U. S. Department of Energy and published by Lulu.com. This book was released on 2016-05-12 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Thermodynamics, Heat Transfer, and Fluid Flow Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of the thermal sciences. The handbook includes information on thermodynamics and the properties of fluids; the three modes of heat transfer - conduction, convection, and radiation; and fluid flow, and the energy relationships in fluid systems. This information will provide personnel with a foundation for understanding the basic operation of various types of DOE nuclear facility fluid systems.
Download or read book DOE Thermodynamics Heat Transfer and Fluid Flow written by Knowledge Publications Corporation and published by Knowledge Publications. This book was released on 2006-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Over 200 U S Department of Energy Manuals Combined CLASSICAL PHYSICS ELECTRICAL SCIENCE THERMODYNAMICS HEAT TRANSFER AND FLUID FUNDAMENTALS INSTRUMENTATION AND CONTROL MATHEMATICS CHEMISTRY ENGINEERING SYMBIOLOGY MATERIAL SCIENCE MECHANICAL SCIENCE AND NUCLEAR PHYSICS AND REACTOR THEORY written by and published by Jeffrey Frank Jones. This book was released on with total page 19288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 19,000 total pages ... Public Domain U.S. Government published manual: Numerous illustrations and matrices. Published in the 1990s and after 2000. TITLES and CONTENTS: ELECTRICAL SCIENCES - Contains the following manuals: Electrical Science, Vol 1 - Electrical Science, Vol 2 - Electrical Science, Vol 3 - Electrical Science, Vol 4 - Thermodynamics, Heat Transfer, And Fluid Flow, Vol 1 - Thermodynamics, Heat Transfer, And Fluid Flow, Vol 2 - Thermodynamics, Heat Transfer, And Fluid Flow, Vol 3 - Instrumentation And Control, Vol 1 - Instrumentation And Control, Vol 2 Mathematics, Vol 1 - Mathematics, Vol 2 - Chemistry, Vol 1 - Chemistry, Vol 2 - Engineering Symbology, Prints, And Drawings, Vol 1 - Engineering Symbology, Prints, And Drawings, Vol 2 - Material Science, Vol 1 - Material Science, Vol 2 - Mechanical Science, Vol 1 - Mechanical Science, Vol 2 - Nuclear Physics And Reactor Theory, Vol 1 - Nuclear Physics And Reactor Theory, Vol 2. CLASSICAL PHYSICS - The Classical Physics Fundamentals includes information on the units used to measure physical properties; vectors, and how they are used to show the net effect of various forces; Newton's Laws of motion, and how to use these laws in force and motion applications; and the concepts of energy, work, and power, and how to measure and calculate the energy involved in various applications. * Scalar And Vector Quantities * Vector Identification * Vectors: Resultants And Components * Graphic Method Of Vector Addition * Component Addition Method * Analytical Method Of Vector Addition * Newton's Laws Of Motion * Momentum Principles * Force And Weight * Free-Body Diagrams * Force Equilibrium * Types Of Force * Energy And Work * Law Of Conservation Of Energy * Power – ELECTRICAL SCIENCE: The Electrical Science Fundamentals Handbook includes information on alternating current (AC) and direct current (DC) theory, circuits, motors, and generators; AC power and reactive components; batteries; AC and DC voltage regulators; transformers; and electrical test instruments and measuring devices. * Atom And Its Forces * Electrical Terminology * Units Of Electrical Measurement * Methods Of Producing Voltage (Electricity) * Magnetism * Magnetic Circuits * Electrical Symbols * DC Sources * DC Circuit Terminology * Basic DC Circuit Calculations * Voltage Polarity And Current Direction * Kirchhoff's Laws * DC Circuit Analysis * DC Circuit Faults * Inductance * Capacitance * Battery Terminology * Battery Theory * Battery Operations * Types Of Batteries * Battery Hazards * DC Equipment Terminology * DC Equipment Construction * DC Generator Theory * DC Generator Construction * DC Motor Theory * Types Of DC Motors * DC Motor Operation * AC Generation * AC Generation Analysis * Inductance * Capacitance * Impedance * Resonance * Power Triangle * Three-Phase Circuits * AC Generator Components * AC Generator Theory * AC Generator Operation * Voltage Regulators * AC Motor Theory * AC Motor Types * Transformer Theory * Transformer Types * Meter Movements * Voltmeters * Ammeters * Ohm Meters * Wattmeters * Other Electrical Measuring Devices * Test Equipment * System Components And Protection Devices * Circuit Breakers * Motor Controllers * Wiring Schemes And Grounding THERMODYNAMICS, HEAT TRANSFER AND FLUID FUNDAMENTALS. The Thermodynamics, Heat Transfer, and Fluid Flow Fundamentals Handbook includes information on thermodynamics and the properties of fluids; the three modes of heat transfer - conduction, convection, and radiation; and fluid flow, and the energy relationships in fluid systems. * Thermodynamic Properties * Temperature And Pressure Measurements * Energy, Work, And Heat * Thermodynamic Systems And Processes * Change Of Phase * Property Diagrams And Steam Tables * First Law Of Thermodynamics * Second Law Of Thermodynamics * Compression Processes * Heat Transfer Terminology * Conduction Heat Transfer * Convection Heat Transfer * Radiant Heat Transfer * Heat Exchangers * Boiling Heat Transfer * Heat Generation * Decay Heat * Continuity Equation * Laminar And Turbulent Flow * Bernoulli's Equation * Head Loss * Natural Circulation * Two-Phase Fluid Flow * Centrifugal Pumps INSTRUMENTATION AND CONTROL. The Instrumentation and Control Fundamentals Handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. * Resistance Temperature Detectors (Rtds) * Thermocouples * Functional Uses Of Temperature Detectors * Temperature Detection Circuitry * Pressure Detectors * Pressure Detector Functional Uses * Pressure Detection Circuitry * Level Detectors * Density Compensation * Level Detection Circuitry * Head Flow Meters * Other Flow Meters * Steam Flow Detection * Flow Circuitry * Synchro Equipment * Switches * Variable Output Devices * Position Indication Circuitry * Radiation Detection Terminology * Radiation Types * Gas-Filled Detector * Detector Voltage * Proportional Counter * Proportional Counter Circuitry * Ionization Chamber * Compensated Ion Chamber * Electroscope Ionization Chamber * Geiger-Müller Detector * Scintillation Counter * Gamma Spectroscopy * Miscellaneous Detectors * Circuitry And Circuit Elements * Source Range Nuclear Instrumentation * Intermediate Range Nuclear Instrumentation * Power Range Nuclear Instrumentation * Principles Of Control Systems * Control Loop Diagrams * Two Position Control Systems * Proportional Control Systems * Reset (Integral) Control Systems * Proportional Plus Reset Control Systems * Proportional Plus Rate Control Systems * Proportional-Integral-Derivative Control Systems * Controllers * Valve Actuators MATHEMATICS The Mathematics Fundamentals Handbook includes a review of introductory mathematics and the concepts and functional use of algebra, geometry, trigonometry, and calculus. Word problems, equations, calculations, and practical exercises that require the use of each of the mathematical concepts are also presented. * Calculator Operations * Four Basic Arithmetic Operations * Averages * Fractions * Decimals * Signed Numbers * Significant Digits * Percentages * Exponents * Scientific Notation * Radicals * Algebraic Laws * Linear Equations * Quadratic Equations * Simultaneous Equations * Word Problems * Graphing * Slopes * Interpolation And Extrapolation * Basic Concepts Of Geometry * Shapes And Figures Of Plane Geometry * Solid Geometric Figures * Pythagorean Theorem * Trigonometric Functions * Radians * Statistics * Imaginary And Complex Numbers * Matrices And Determinants * Calculus CHEMISTRY The Chemistry Handbook includes information on the atomic structure of matter; chemical bonding; chemical equations; chemical interactions involved with corrosion processes; water chemistry control, including the principles of water treatment; the hazards of chemicals and gases, and basic gaseous diffusion processes. * Characteristics Of Atoms * The Periodic Table * Chemical Bonding * Chemical Equations * Acids, Bases, Salts, And Ph * Converters * Corrosion Theory * General Corrosion * Crud And Galvanic Corrosion * Specialized Corrosion * Effects Of Radiation On Water Chemistry (Synthesis) * Chemistry Parameters * Purpose Of Water Treatment * Water Treatment Processes * Dissolved Gases, Suspended Solids, And Ph Control * Water Purity * Corrosives (Acids And Alkalies) * Toxic Compound * Compressed Gases * Flammable And Combustible Liquids ENGINEERING SYMBIOLOGY. The Engineering Symbology, Prints, and Drawings Handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. * Introduction To Print Reading * Introduction To The Types Of Drawings, Views, And Perspectives * Engineering Fluids Diagrams And Prints * Reading Engineering P&Ids * P&Id Print Reading Example * Fluid Power P&Ids * Electrical Diagrams And Schematics * Electrical Wiring And Schematic Diagram Reading Examples * Electronic Diagrams And Schematics * Examples * Engineering Logic Diagrams * Truth Tables And Exercises * Engineering Fabrication, Construction, And Architectural Drawings * Engineering Fabrication, Construction, And Architectural Drawing, Examples MATERIAL SCIENCE. The Material Science Handbook includes information on the structure and properties of metals, stress mechanisms in metals, failure modes, and the characteristics of metals that are commonly used in DOE nuclear facilities. * Bonding * Common Lattice Types * Grain Structure And Boundary * Polymorphism * Alloys * Imperfections In Metals * Stress * Strain * Young's Modulus * Stress-Strain Relationship * Physical Properties * Working Of Metals * Corrosion * Hydrogen Embrittlement * Tritium/Material Compatibility * Thermal Stress * Pressurized Thermal Shock * Brittle Fracture Mechanism * Minimum Pressurization-Temperature Curves * Heatup And Cooldown Rate Limits * Properties Considered * When Selecting Materials * Fuel Materials * Cladding And Reflectors * Control Materials * Shielding Materials * Nuclear Reactor Core Problems * Plant Material Problems * Atomic Displacement Due To Irradiation * Thermal And Displacement Spikes * Due To Irradiation * Effect Due To Neutron Capture * Radiation Effects In Organic Compounds * Reactor Use Of Aluminum MECHANICAL SCIENCE. The Mechanical Science Handbook includes information on diesel engines, heat exchangers, pumps, valves, and miscellaneous mechanical components. * Diesel Engines * Fundamentals Of The Diesel Cycle * Diesel Engine Speed, Fuel Controls, And Protection * Types Of Heat Exchangers * Heat Exchanger Applications * Centrifugal Pumps * Centrifugal Pump Operation * Positive Displacement Pumps * Valve Functions And Basic Parts * Types Of Valves * Valve Actuators * Air Compressors * Hydraulics * Boilers * Cooling Towers * Demineralizers * Pressurizers * Steam Traps * Filters And Strainers NUCLEAR PHYSICS AND REACTOR THEORY. The Nuclear Physics and Reactor Theory Handbook includes information on atomic and nuclear physics; neutron characteristics; reactor theory and nuclear parameters; and the theory of reactor operation. * Atomic Nature Of Matter * Chart Of The Nuclides * Mass Defect And Binding Energy * Modes Of Radioactive Decay * Radioactivity * Neutron Interactions * Nuclear Fission * Energy Release From Fission * Interaction Of Radiation With Matter * Neutron Sources * Nuclear Cross Sections And Neutron Flux * Reaction Rates * Neutron Moderation * Prompt And Delayed Neutrons * Neutron Flux Spectrum * Neutron Life Cycle * Reactivity * Reactivity Coefficients * Neutron Poisons * Xenon * Samarium And Other Fission Product Poisons * Control Rods * Subcritical Multiplication * Reactor Kinetics * Reactor
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat transfer written by Yunus Ali Cengel and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Hydraulics written by Maurizio Cumo and published by CRC Press. This book was released on 2018-01-18 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text, including the description of the most relevant phenomenologies and of some advanced techniques in heat transfer with fluids, is mainly aimed at engineers using design or computer analysis programs and codes, in order to achieve a deeper understanding of the phenomenologies and of the applied analysis methods. This text will be helpful to people engaged in developing original computer programs or design methods, because they may find in it basic information on the computer program-oriented solutions of the conservation equations and of the various flow and heat transfer mechanisms. The selection of up-to-date correlations in various heat and mass transfer branches represents, for the designers using traditional techniques, a helpful instrument to integrate the basic handbooks.The trial of representing phenomenologies and problems through elementary concepts makes this text useful to students at the graduate level involved in the study of fluid flow and heat transfer.
Download or read book Heat Exchangers written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2024-02-29 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Exchangers: Classification, Selection, and Thermal Design, Third Edition discusses heat exchangers and their various applications, such as refrigeration, air conditioning, automobiles, gas turbines, process industries, refineries, and thermal power plants. With a focus on thermal design methods, including rating and sizing, the book covers thermohydraulic fundamentals and thermal effectiveness charts for various flow configurations and shell and tube heat exchangers. It provides construction details, geometrical features and correlations, and thermo-hydraulic details for tube-fin, plate fin, air-cooled, shell and tube, microchannel, and plate heat exchangers and thermal design methods like rating and sizing. The book explores additive manufacturing of heat exchangers, printed circuit heat exchangers, and heat transfer augmentation methods. The book also describes recuperators and regenerators of gas turbine cycles, waste heat recovery devices, and phase change phenomena including boiling, condensation and steam generation. The book serves as a useful reference for researchers, graduate students, and engineers in the field of heat exchanger design, including heat exchanger manufacturers.
Download or read book DOE this Month written by and published by . This book was released on 1992-10 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Doe Fundamentals Handbook Chemistry Volume 1 of 2 written by U. S. Department of Energy and published by Lulu.com. This book was released on 2016-05-12 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemistry Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of chemistry. The handbook includes information on the atomic structure of matter; chemical bonding; chemical equations; chemical interactions involved with corrosion processes; water chemistry control, including the principles of water treatment; the hazards of chemicals and gases, and basic gaseous diffusion processes. This information will provide personnel with a foundation for understanding the chemical properties of materials and the way these properties can impose limitations on the operation of equipment and systems.
Download or read book Heat Transfer Thermodynamics and Fluid Flow Fundamentals written by G P Courseware and published by . This book was released on 1981-02 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Heat Transfer and Fluid Flow written by Suhas Patankar and published by CRC Press. This book was released on 2018-10-08 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on heat and mass transfer, fluid flow, chemical reaction, and other related processes that occur in engineering equipment, the natural environment, and living organisms. Using simple algebra and elementary calculus, the author develops numerical methods for predicting these processes mainly based on physical considerations. Through this approach, readers will develop a deeper understanding of the underlying physical aspects of heat transfer and fluid flow as well as improve their ability to analyze and interpret computed results.
Download or read book Introduction to Thermo Fluids Systems Design written by Andrè Garcia McDonald and published by John Wiley & Sons. This book was released on 2012-08-23 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully comprehensive guide to thermal systems design covering fluid dynamics, thermodynamics, heat transfer and thermodynamic power cycles Bridging the gap between the fundamental concepts of fluid mechanics, heat transfer and thermodynamics, and the practical design of thermo-fluids components and systems, this textbook focuses on the design of internal fluid flow systems, coiled heat exchangers and performance analysis of power plant systems. The topics are arranged so that each builds upon the previous chapter to convey to the reader that topics are not stand-alone items during the design process, and that they all must come together to produce a successful design. Because the complete design or modification of modern equipment and systems requires knowledge of current industry practices, the authors highlight the use of manufacturer’s catalogs to select equipment, and practical examples are included throughout to give readers an exhaustive illustration of the fundamental aspects of the design process. Key Features: Demonstrates how industrial equipment and systems are designed, covering the underlying theory and practical application of thermo-fluid system design Practical rules-of-thumb are included in the text as ‘Practical Notes’ to underline their importance in current practice and provide additional information Includes an instructor’s manual hosted on the book’s companion website
Download or read book Encyclopedia Of Two phase Heat Transfer And Flow Iii Macro And Micro Flow Boiling And Numerical Modeling Fundamentals A 4 volume Set written by John R Thome and published by World Scientific. This book was released on 2018-03-13 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Set III of this encyclopedia is a new addition to the previous Sets I and II. It contains 26 invited chapters from international specialists on the topics of numerical modeling of two-phase flows and evaporation, fundamentals of evaporation and condensation in microchannels and macrochannels, development and testing of micro two-phase cooling systems for electronics, and various special topics (surface wetting effects, microfin tubes, two-phase flow vibration across tube bundles). The chapters are written both by renowned university researchers and by well-known engineers from leading corporate research laboratories. Numerous 'must read' chapters cover the fundamentals of research and engineering practice on boiling, condensation and two-phase flows, two-phase heat transfer equipment, electronics cooling systems, case studies and so forth. Set III constitutes a 'must have' reference together with Sets I and II for thermal engineering researchers and practitioners.
Download or read book An Introduction to Fluid Mechanics and Heat Transfer written by J. M. Kay and published by Cambridge University Press. This book was released on 1975-01-09 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1975 as the third edition of a 1957 original, this book presents the fundamental ideas of fluid flow, viscosity, heat conduction, diffusion, the energy and momentum principles, and the method of dimensional analysis. These ideas are subsequently developed in terms of their important practical applications, such as flow in pipes and channels, pumps, compressors and heat exchangers. Later chapters deal with the equation of fluid motion, turbulence and the general equations of forced convection. The final section discusses special problems in process engineering, including compressible flow in pipes, solid particles in fluid flow, flow through packed beds, condensation and evaporation. This book will be of value to anyone with an interest the wider applications of fluid mechanics and heat transfer.
Download or read book Introduction to Thermal and Fluid Engineering written by Allan D. Kraus and published by CRC Press. This book was released on 2011-09-06 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Thermal and Fluid Engineering combines coverage of basic thermodynamics, fluid mechanics, and heat transfer for a one- or two-term course for a variety of engineering majors. The book covers fundamental concepts, definitions, and models in the context of engineering examples and case studies. It carefully explains the methods used t
Download or read book Direct Contact Heat Transfer written by Frank Kreith and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: to increase the use of direct contact processes, the National Science Foundation sup ported a workshop on direct contact heat transfer at the Solar Energy Research Insti tute in the summer of 1985. We served as organizers for this workshop, which em phasized an area of thermal engineering that, in our opinion, has great promise for the future, but has not yet reached the point of wide-spread commercial application. Hence, a summary of the state of knowledge at this point is timely. The workshop had a dual objective: 1. To summarize the current state of knowledge in such a form that industrial practi tioners can make use of the available information. 2. To indicate the research and development needed to advance the state-of-the-art, indicating not only what kind of research is needed, but also the industrial poten tial that could be realized if the information to be obtained through the proposed research activities were available.
