Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by National Research Council and published by National Academies Press. This book was released on 1997-04-18 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.

Download or read book Formal Techniques for Networked and Distributed Systems FORTE 2005 written by Farn Wang and published by Springer Science & Business Media. This book was released on 2005-09-26 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 25th IFIP WG 6.1 International Conference on Formal Techniques for Networked and Distributed Systems, FORTE 2005, held in Taipei, Taiwan, in October 2005. The 33 revised full papers and 6 short papers presented together with 3 keynote speeches were carefully reviewed and selected from 88 submissions. The papers cover all current aspects of formal methods for distributed systems and communication protocols such as formal description techniques (MSC, UML, Use cases, . . .), semantic foundations, model-checking, SAT-based techniques, process algebrae, abstractions, protocol testing, protocol verification, network synthesis, security system analysis, network robustness, embedded systems, communication protocols, and several promising new techniques.

Download or read book Cyber Physical Distributed Systems written by Huadong Mo and published by John Wiley & Sons. This book was released on 2021-08-23 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: CYBER-PHYSICAL DISTRIBUTED SYSTEMS Gather detailed knowledge and insights into cyber-physical systems behaviors from a cutting-edge reference written by leading voices in the field In Cyber-Physical Distributed Systems: Modeling, Reliability Analysis and Applications, distinguished researchers and authors Drs. Huadong Mo, Giovanni Sansavini, and Min Xie deliver a detailed exploration of the modeling and reliability analysis of cyber physical systems through applications in infrastructure and energy and power systems. The book focuses on the integrated modeling of systems that bring together physical and cyber elements and analyzing their stochastic behaviors and reliability with a view to controlling and managing them. The book offers a comprehensive treatment on the aging process and corresponding online maintenance, network degradation, and cyber-attacks occurring in cyber-physical systems. The authors include many illustrative examples and case studies based on real-world systems and offer readers a rich set of references for further research and study. Cyber-Physical Distributed Systems covers recent advances in combinatorial models and algorithms for cyber-physical systems modeling and analysis. The book also includes: A general introduction to traditional physical/cyber systems, and the challenges, research trends, and opportunities for real cyber-physical systems applications that general readers will find interesting and useful Discussions of general modeling, assessment, verification, and optimization of industrial cyber-physical systems Explorations of stability analysis and enhancement of cyber-physical systems, including the integration of physical systems and open communication networks A detailed treatment of a system-of-systems framework for the reliability analysis and optimal maintenance of distributed systems with aging components Perfect for undergraduate and graduate students in computer science, electrical engineering, cyber security, industrial and system engineering departments, Cyber-Physical Distributed Systems will also earn a place on the bookshelves of students taking courses related to reliability, risk and control engineering from a system perspective. Reliability, safety and industrial control professionals will also benefit greatly from this book.

Download or read book Integration of Distributed Generation in the Power System written by Math H. J. Bollen and published by John Wiley & Sons. This book was released on 2011-08-09 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The integration of new sources of energy like wind power, solar-power, small-scale generation, or combined heat and power in the power grid is something that impacts a lot of stakeholders: network companies (both distribution and transmission), the owners and operators of the DG units, other end-users of the power grid (including normal consumers like you and me) and not in the least policy makers and regulators. There is a lot of misunderstanding about the impact of DG on the power grid, with one side (including mainly some but certainly not all, network companies) claiming that the lights will go out soon, whereas the other side (including some DG operators and large parks of the general public) claiming that there is nothing to worry about and that it's all a conspiracy of the large production companies that want to protect their own interests and keep the electricity price high. The authors are of the strong opinion that this is NOT the way one should approach such an important subject as the integration of new, more environmentally friendly, sources of energy in the power grid. With this book the authors aim to bring some clarity to the debate allowing all stakeholders together to move to a solution. This book will introduce systematic and transparent methods for quantifying the impact of DG on the power grid.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Power Plants Innovative Technologies for Instrumentation and Control Systems written by Yang Xu and published by Springer Nature. This book was released on 2020-01-07 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a compilation of selected papers from the Fourth International Symposium on Software Reliability, Industrial Safety, Cyber Security and Physical Protection of Nuclear Power Plant, held in August 2019 in Guiyang, China. The purpose of the symposium was to discuss inspection, testing, certification and research concerning the software and hardware of instrument and control (I&C) systems used at nuclear power plants (NPP), such as sensors, actuators and control systems. The event provides a venue for exchange among experts, scholars and nuclear power practitioners, as well as a platform for the combination of teaching and research at universities and enterprises to promote the safe development of nuclear power plants. Readers will find a wealth of valuable insights into achieving safer and more efficient instrumentation and control systems.

Download or read book Autonomous Nuclear Power Plants with Artificial Intelligence written by Jonghyun Kim and published by Springer Nature. This book was released on 2023-02-20 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces novel approaches and practical examples of autonomous nuclear power plants that minimize operator intervention. Autonomous nuclear power plants with artificial intelligence presents a framework to enable nuclear power plants to autonomously operate and introduces artificial intelligence (AI) techniques to implement its functions. Although nuclear power plants are already highly automated to reduce human errors and guarantee the reliability of system operations, the term “autonomous” is still not popular because AI techniques are regarded as less proven technologies. However, the use of AI techniques and the autonomous operation seems unavoidable because of their great advantages, especially, in advanced reactors and small modular reactors. The book includes the following topics: Monitoring, diagnosis, and prediction. Intelligent control. Operator support systems. Operator-autonomous system interaction. Integration into the autonomous operation system. This book will provides useful information for researchers and students who are interested in applying AI techniques in the fields of nuclear as well as other industries. This book covers broad practical applications of AI techniques from the classical fault diagnosis to more recent autonomous control. In addition, specific techniques and modelling examples are expected to be very informative to the beginners in the AI studies.

Download or read book Fault Tolerant Parallel and Distributed Systems written by Dimiter R. Avresky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most important use of computing in the future will be in the context of the global "digital convergence" where everything becomes digital and every thing is inter-networked. The application will be dominated by storage, search, retrieval, analysis, exchange and updating of information in a wide variety of forms. Heavy demands will be placed on systems by many simultaneous re quests. And, fundamentally, all this shall be delivered at much higher levels of dependability, integrity and security. Increasingly, large parallel computing systems and networks are providing unique challenges to industry and academia in dependable computing, espe cially because of the higher failure rates intrinsic to these systems. The chal lenge in the last part of this decade is to build a systems that is both inexpensive and highly available. A machine cluster built of commodity hardware parts, with each node run ning an OS instance and a set of applications extended to be fault resilient can satisfy the new stringent high-availability requirements. The focus of this book is to present recent techniques and methods for im plementing fault-tolerant parallel and distributed computing systems. Section I, Fault-Tolerant Protocols, considers basic techniques for achieving fault-tolerance in communication protocols for distributed systems, including synchronous and asynchronous group communication, static total causal order ing protocols, and fail-aware datagram service that supports communications by time.

Download or read book Understanding Distributed Systems Second Edition written by Roberto Vitillo and published by Roberto Vitillo. This book was released on 2022-02-23 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learning to build distributed systems is hard, especially if they are large scale. It's not that there is a lack of information out there. You can find academic papers, engineering blogs, and even books on the subject. The problem is that the available information is spread out all over the place, and if you were to put it on a spectrum from theory to practice, you would find a lot of material at the two ends but not much in the middle. That is why I decided to write a book that brings together the core theoretical and practical concepts of distributed systems so that you don't have to spend hours connecting the dots. This book will guide you through the fundamentals of large-scale distributed systems, with just enough details and external references to dive deeper. This is the guide I wished existed when I first started out, based on my experience building large distributed systems that scale to millions of requests per second and billions of devices. If you are a developer working on the backend of web or mobile applications (or would like to be!), this book is for you. When building distributed applications, you need to be familiar with the network stack, data consistency models, scalability and reliability patterns, observability best practices, and much more. Although you can build applications without knowing much of that, you will end up spending hours debugging and re-architecting them, learning hard lessons that you could have acquired in a much faster and less painful way. However, if you have several years of experience designing and building highly available and fault-tolerant applications that scale to millions of users, this book might not be for you. As an expert, you are likely looking for depth rather than breadth, and this book focuses more on the latter since it would be impossible to cover the field otherwise. The second edition is a complete rewrite of the previous edition. Every page of the first edition has been reviewed and where appropriate reworked, with new topics covered for the first time.

Download or read book Principles of Distributed Systems written by Theodore P. Baker and published by Springer Science & Business Media. This book was released on 2008-12-02 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th International Conference on Principles of Distributed Systems, OPODIS 2008, held in Luxor, Egypt, in December 2008. The 30 full papers and 11 short papers presented were carefully reviewed and selected from 102 submissions. The conference focused on the following topics: communication and synchronization protocols; distributed algorithms and multiprocessor algorithms; distributed cooperative computing; embedded systems; fault-tolerance, reliability and availability; grid and cluster computing; location- and context-aware systems; mobile agents and autonomous robots; mobile computing and networks; peer-to-peer systems and overlay networks; complexity and lower bounds; performance analysis of distributed systems; real-time systems; security issues in distributed computing and systems; sensor networks; specification and verification of distributed systems; and testing and experimentation with distributed systems.

Download or read book Nuclear Power Plant Equipment Prognostics and Health Management Based on Data driven methods written by Jun Wang and published by Frontiers Media SA. This book was released on 2021-09-13 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intelligent Systems And Soft Computing For Nuclear Science And Industry Proceedings Of The 2nd International Flins Workshop written by Da Ruan and published by World Scientific. This book was released on 1996-07-29 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following FLINS '94, the 1st International workshop on fuzzy logic and intelligent technologies in nuclear science, FLINS '96 aimed to introduce the principles of intelligent systems and soft computing, such as fuzzy logic, neural networks, genetic algorithms (and any combination of these three), knowledge-based expert systems and complex problem-solving techniques, in nuclear science and industry and in related fields.This volume presents carefully selected papers drawn from more than 20 countries. It covers theoretical aspects of intelligent systems and soft computing, together with their applications in nuclear science and industry.

Download or read book Energy and Fuel Systems Integration written by Yatish T. Shah and published by CRC Press. This book was released on 2015-10-15 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy and Fuel Systems Integration explains how growing energy and fuel demands, paired with the need for environmental preservation, require different sources of energy and fuel to cooperate and integrate with each other rather than simply compete. Providing numerous examples of energy and fuel systems integration success stories, this book:Discu

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976-06 with total page 1216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building Dependable Distributed Systems written by Wenbing Zhao and published by John Wiley & Sons. This book was released on 2014-03-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-volume guide to the most essential techniques for designing and building dependable distributed systems Instead of covering a broad range of research works for each dependability strategy, this useful reference focuses on only a selected few (usually the most seminal works, the most practical approaches, or the first publication of each approach), explaining each in depth, usually with a comprehensive set of examples. Each technique is dissected thoroughly enough so that readers who are not familiar with dependable distributed computing can actually grasp the technique after studying the book. Building Dependable Distributed Systems consists of eight chapters. The first introduces the basic concepts and terminology of dependable distributed computing, and also provides an overview of the primary means of achieving dependability. Checkpointing and logging mechanisms, which are the most commonly used means of achieving limited degree of fault tolerance, are described in the second chapter. Works on recovery-oriented computing, focusing on the practical techniques that reduce the fault detection and recovery times for Internet-based applications, are covered in chapter three. Chapter four outlines the replication techniques for data and service fault tolerance. This chapter also pays particular attention to optimistic replication and the CAP theorem. Chapter five explains a few seminal works on group communication systems. Chapter six introduces the distributed consensus problem and covers a number of Paxos family algorithms in depth. The Byzantine generals problem and its latest solutions, including the seminal Practical Byzantine Fault Tolerance (PBFT) algorithm and a number of its derivatives, are introduced in chapter seven. The final chapter details the latest research results surrounding application-aware Byzantine fault tolerance, which represents an important step forward in the practical use of Byzantine fault tolerance techniques.

Download or read book Instrumentation and Control Systems for Nuclear Power Plants written by Mauro Cappelli and published by Woodhead Publishing. This book was released on 2023-03-21 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation and Control Systems for Nuclear Power Plants provides the latest innovative research onthe design of effective modern I&C systems for both existing and newly commissioned plants, along withinformation on system implementation. Dr. Cappelli and his team of expert contributors cover fundamentals,explore the most advanced research in control systems technology, and tackle topics such as the human–machine interface, control room redesign, and control modeling. The inclusion of codes and standards,inspection procedures, and regulatory issues ensure that the reader can confidently design their own I&Csystems and integrate them into existing nuclear sites and projects. - Covers various viewpoints, including theory, modeling, design and applications of I&C systems - Includes codes and standards, inspection procedures and regulatory issues - Combines engineering and physics aspects in one thorough resource, presenting human factors, modeling and HMI together for the first time - Instrumentation and Control Systems for Nuclear Power Plants highlights the key role nuclear energy plays in the transition to a lower-carbon energy mix

Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1976 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: