Download or read book Distributed Computer Control Systems 1998 DCCS 98 written by International Federation of Automatic Control and published by Pergamon. This book was released on 1999 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer control systems are increasingly required to be highly dependable and to have deterministic timing properties. Distributed architectures have the potential to meet this challenge. The advantages of distributed computer control systems include the possibility of composing large systems out of pre-tested components with small integration effort, their well-defined fault containment properties and their capacity to make effective use of mass-produced silicon chips. The IFAC Workshop series on Distributed Computer Control Systems (DCCS) highlights and traces the growth of key concepts in this field at their various stages of development. Theoretical and practice-oriented viewpoints receive equal emphasis and there is a creative blending of the disciplines of computer science and control engineering. The 1998 DCCS Workshop was notable for the attention given to true real-time communication networks and protocols. The complexity of the trade-off between services, dependability mechanisms and system-level properties was highlighted, and rigorous modelling and analysis methodologies were discussed. Event-triggered and time-triggered protocols were contrasted. Models for analysing and predicting response times in distributed systems and for predicting the effect of response-time jitter on the performance of feedback control loops were presented. The application of formal methods to the specification and development of safety-critical control software also received much attention. Distributed object methodologies and object request brokers were also highlighted as being promising approaches for the programming of large-scale, heterogeneous distributed systems. Applications reported included control systems for traffic lights, jet engines, automobiles, fully-automatic trains and flexible manufacturing systems.

Download or read book Parallel and Distributed Processing written by José D. P. Rolim and published by Springer Science & Business Media. This book was released on 1999-03-30 with total page 1474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of 11 IPPS/SPDP '98 Workshops held in conjunction with the 13th International Parallel Processing Symposium and the 10th Symposium on Parallel and Distributed Processing in San Juan, Puerto Rico, USA in April 1999. The 126 revised papers presented were carefully selected from a wealth of papers submitted. The papers are organised in topical sections on biologically inspired solutions to parallel processing problems: High-Level Parallel Programming Models and Supportive Environments; Biologically Inspired Solutions to Parallel Processing; Parallel and Distributed Real-Time Systems; Run-Time Systems for Parallel Programming; Reconfigurable Architectures; Java for Parallel and Distributed Computing; Optics and Computer Science; Solving Irregularly Structured Problems in Parallel; Personal Computer Based Workstation Networks; Formal Methods for Parallel Programming; Embedded HPC Systems and Applications.

Download or read book Distributed Computer Control Systems written by and published by . This book was released on 1999 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Distributed Computer Control Systems in Industrial Automation written by VijayP. Bhatkar and published by Routledge. This book was released on 2017-11-22 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reference guide for professionals or text for graduate and postgraduate students, this volume emphasizes practical designs and applications of distributed computer control systems. It demonstrates how to improve plant productivity, enhance product quality, and increase the safety, reliability, and

Download or read book Distributed Computer Control Systems 2000 written by A. Sowmya and published by Pergamon. This book was released on 2001-05-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contain the papers presented at the 16th IFAC Workshop on Distributed Computer Control Systems (DCCS) held in Sydney, Australia in December 2000. Development of distributed computer control systems makes demands on the disciplines of computer science and engineering as well as electrical engineering, and usually involves both hardware and software that is reliable and with assured timing properties. The DCCS series of workshops contributes to this inter-disciplinary area by bringing together academic researchers and practitioners who may normally not attend the same events. During the past decade, DCCS has focused on novel technologies for distributed control systems. These papers fall in the areas of classical control theory, computer architecture, real-time computer networks, and formal methods for real-time systems, besides application papers in all of these areas. Out of 34 submitted papers, 24 were selected for presentation at the workshop.

Download or read book Distributed Computer Control System written by T. J. Harrison and published by Elsevier. This book was released on 2014-05-19 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed Computer Control Systems: Proceedings of the IFAC Workshop, Tampa, Florida, U.S.A., 2-4 October 1979 focuses on the design, processes, methodologies, and applications of distributed computing systems. The selection first discusses the use of distributed control systems for facility energy management, including space conditioning control, plant design, central plant control, and system design. The book then takes a look at programming distributed computer systems with higher level languages. Topics include design of an application programming language for distributed computing systems; realization of a suitable programming language for distributed computing systems; and optimal structure and capabilities of an automatic control system. The text focuses on the similarities and differences of distributed computer control systems; transaction processing as an efficient conceptual framework for comparing and understanding distributed systems; and multi-processor approach for the automation of quality control in an overall production control system. The selection also deals with transaction processing in distributed control systems; parallel processing for distributed computer control systems; and design and development of distributed control systems. The book is a vital source of data for readers interested in distributed computing.

Download or read book Reliable Software Technology Ada Europe 2005 written by Tullio Vardanega and published by Springer Science & Business Media. This book was released on 2005-06-08 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Conference on Reliable Software Technologies, Ada-Europe 2005, held in York, UK in June 2005. The 21 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on applications, design and scheduling, formal methods, Ada and education, certification and verification, distributed systems, language aspects, and Ravenscar technology.

Download or read book Theory and Algorithms for Cooperative Systems written by Don A. Grundel and published by World Scientific. This book was released on 2004 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several years, cooperative control and optimization have increasingly played a larger and more important role in many aspects of military sciences, biology, communications, robotics, and decision making. At the same time, cooperative systems are notoriously difficult to model, analyze, and solve OCo while intuitively understood, they are not axiomatically defined in any commonly accepted manner. The works in this volume provide outstanding insights into this very complex area of research. They are the result of invited papers and selected presentations at the Fourth Annual Conference on Cooperative Control and Optimization held in Destin, Florida, November 2003. This book has been selected for coverage in: . OCo Index to Scientific & Technical Proceedings- (ISTP- / ISI Proceedings). OCo Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings). OCo CC Proceedings OCo Engineering & Physical Sciences. Contents: Mesh Stability in Formation of Distributed Systems (C Ashokkumar et al.); On the Performance of Heuristics for Broadcast Scheduling (C Commander et al.); Coupled Detection Rates: An Introduction (D Jeffcoat); Decentralized Receding Horizon Control for Multiple UAVs (Y Kuwata & J How); Multitarget Sensor Management of Dispersed Mobile Sensors (R Mahler); K-Means Clustering Using Entropy Minimization (A Okafor & P Pardalos); Possibility Reasoning and the Cooperative Prisoner''s Dilemma (H Pfister & J Walls); Coordinating Very Large Groups of Wide Area Search Munitions (P Scerri et al.); A Vehicle Following Methodology for UAV Formations (S Spry et al.); Decentralized Optimization via Nash Bargaining (S Waslander et al.); and other papers. Readership: Graduate students and researchers in optimization and control, computer science and engineering."

Download or read book Formal Methods and Software Engineering written by Zhiming Liu and published by Springer Science & Business Media. This book was released on 2006-10-24 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 8th International Conference on Formal Engineering Methods, ICFEM 2006, held in Macao, China, in November 2006. The 38 revised full papers presented together with three keynote talks were carefully reviewed and selected from 108 submissions. The papers address all current issues in formal methods and their applications in software engineering.

Download or read book Distributed Computer Control Systems 1985 written by G. J. Suski and published by Elsevier. This book was released on 2014-05-23 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on recent advances in the theory, applications and techniques for distributed computer control systems. Topics covered include: DCCS applications and case studies, DCCS communications, architectural considerations in DCCS, DCCS tools for design and development, DCCS communication management, function and resource allocation in DCCS, design methodologies for DCCS, DCCS applications and systems. Contains 22 papers.

Download or read book Distributed Computer Control Systems 1989 written by L. Motus and published by Elsevier. This book was released on 2014-07-04 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the workshop was on recent advances in the theory, applications and techniques for distributed computer control systems. Topics included: tools and methods for inner layers of DCCS; application papers presenting operational DCCS; the infiltration of true real-time or "time critical" concepts and the emergence of artificial intelligence methods in DCCS applications, leading to novel computer architectures being integrated in computer networks. The book will be of interest not only to those involved in DCCS but also software engineers and distributed computing scientists.

Download or read book Advances in Networked Enterprises written by Luis M. Camarinha-Matos and published by Springer Science & Business Media. This book was released on 2000-09-30 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: New market trends and the emergence of the so-called Internet-based `new economy' are leading companies to new forms of organization, mostly relying on privileged cooperation links. Nowadays, most manufacturing processes are not carried out by single enterprises. Rather, organizations feel the need to focus on their core competencies and join efforts with others, in order to fulfill the requirements of new products/services demanded by the global market. In a cooperative networked organization, every enterprise is just a node that adds some value to the process; namely, a step in the manufacturing/supply chain. Furthermore, manufacturing companies increasingly encompass what has typically been regarded as the domain of the service sector. They try to establish long-term relationships with their customers, in order to service their needs around a manufactured product. For these reasons, the area of virtual organizations and industrial virtual enterprises is attracting growing interest in terms of research and development, and implementation approaches for new business practices. The main emphasis of this book is on virtual enterprises and other networked organizations, with special focus on: supporting infrastructures and management of distributed business processes, intelligent multi-agent systems, knowledge management, human interfaces, and socio-economical aspects. Also included in the book are related topics on automation, both in manufacturing and transportation. Special attention is assigned to the fact that advances in information technology and new organizational paradigms will be used not only to induce new economic structures, but also to help a sustainable migration of existing systems towards the new economy. When electronic business initiatives attract such widespread attention, it is important to conciliate the `old' and `new' economies under a balanced perspective. Advances in Networked Enterprises is essential reading for researchers and engineering students in production engineering, computer science, electrical engineering, mechanical engineering, industrial sociology, and transportation, as well as for engineers and practitioners in manufacturing and transportation systems organization and planning.

Download or read book Distributed Computer Control Systems 1981 written by William E. Miller and published by Elsevier. This book was released on 2014-05-20 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed Computer Control Systems 1981 covers the proceedings of the Third IFAC Workshop, held in Beijing, China on August 13-17, 1981. The book focuses on the advancements of processes, technologies, and approaches employed in distributed computer control systems (DCCS). The selection first offers information on the summary report of the Third IFAC Workshop on Distributed Computer Control Systems and application of DCCS to the modernization of metal rolling mills. Discussions focus on system architecture, hot strip process, software structuring, and man-machine interface. The text then examines distributed microcomputer control systems for electrical power plants; distributed versus centralized computer control systems of industrial continuous process; and practical considerations for design and implementation of distributed digital control. The text takes a look at the architectural considerations of DCCS and its use in scientific experiments. Topics include system interaction software for the ECN, architectural schemes of DCCS, comparison of DCCS and multiprocessors, generalization of the concept of parallelism, and combined architectural realization of parallelism. The partitioning and synchronization concepts for computing dynamical systems algorithms on distributed computer control networks and scheduling of DCCS for industrial robots are also discussed. The selection is a vital reference for readers interested in distributed computer control systems.

Download or read book Distributed Computer Control Systems 1995 written by A.E.K. Sahraoui and published by Elsevier. This book was released on 2014-05-23 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series of IFAC Workshops on distributed computer control systems (DCCS) provide the opportunity for leading researchers and practitioners in the field to discuss and evaluate recent advances and current issues in theory, applications and technology of DCCS. DCCS'95, the 13th IFAC workshop in the series was held in Toulouse-Blagnac, France. The topics covered at this meeting included: the role of real-time in DCCS specifications; scheduling methods for DCCS; real-time distributed operating systems and databases and industrial applications and experience with DCSS.

Download or read book Handbook of Real Time and Embedded Systems written by Insup Lee and published by CRC Press. This book was released on 2007-07-23 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time and embedded systems are essential to our lives, from controlling car engines and regulating traffic lights to monitoring plane takeoffs and landings to providing up-to-the-minute stock quotes. Bringing together researchers from both academia and industry, the Handbook of Real-Time and Embedded Systems provides comprehensive covera

Download or read book Parallel and Distributed Processing written by and published by . This book was released on 1999 with total page 1478 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings IEEE Control Systems Society Symposium on Computer Aided Control System Design CACSD written by and published by . This book was released on 1999 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: