Download or read book Distinct Element Modelling in Geomechanics written by K.R. Saxena and published by Routledge. This book was released on 2018-12-20 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear mathematical assumptions for procedures in other branches of engineering have little relevance for geoengineering, which must accommodate non-linear behaviors. Contributors to eight papers apply the breakthrough numerical modeling Distinct Element Method (Cundall, late 1960s). The design philosophy for structures or excavations in geotechnical engineering is different from that followed for fabricated materials like steel and concrete. The designer has little data both with regard to geological weaknesses and strength and deformation characteristics of materials before finalizing the designs. Also these characteristics vary from place to place. In-situ stresses due to gravity and tectonics and transient forces imposed due to rainfall and earthquakes make the matter more complicated. The pore waters carry the load initially before passing it on to the solids. For the analytical procedure, to be realistic, it should account for large displacements and non-linear behaviour including strain-softening. Because of these considerations, the designers have followed procedures based on simplifying assumptions such as linear, small strain, elastoplastic behaviour. Numerical procedures based on such assumptions, though very popular in other branches of engineering, have made little impact in geo-engineering. An attempt has been made in this book to compile the recent use of distinct element codes for solutions of some of the problems in geomechanics — particularly those involving excavations. It is hoped that it will provide an opportunity for the fraternity of geotechnical engineers to appreciate the opening of new frontiers in the use of computers for solving more challenging geotechnical problems.

Download or read book Particulate Discrete Element Modelling written by Catherine O'Sullivan and published by CRC Press. This book was released on 2011-04-06 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first single work on DEM providing the information to get started with this powerful numerical modelling approach. Provides the basic details of the numerical method and the approaches used to interpret the results of DEM simulations. It will be of use to professionals, researchers and higher level students, with a theoretical overview of DEM as well as practical guidance.Selected Contents: 1.Introduction 2.Use of DEM in Geomechanics 3.Calculation of Contact Forces 4.Particle Motion 5.Particle Types 6.Boundary Conditions 7.Initial Geometry and Specimen Generation 8.Time Integration and Discrete Element Modelling 9.DEM Interpretation: A Continuum Perspective 10.Postprocessing: Graphical Interpretation of DEM Simulations 11.Basic Statisti

Download or read book Notes on Numerical Modeling in Geomechanics written by William G. Pariseau and published by CRC Press. This book was released on 2022-03-31 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to numerical analysis in geomechanics and is intended for advanced undergraduate and beginning graduate study of the mechanics of porous, jointed rocks and soils. Although familiarity with the concepts of stress, strain and so on is assumed, a review of the fundamentals of solid mechanics including concepts of physical laws, kinematics and material laws is presented in an appendix. Emphasis is on the popular finite element method but brief explanations of the boundary element method, the distinct element method (also known as the discrete element method) and discontinuous deformation analysis are included. Familiarity with a computer programming language such as Fortran, C++ or Python is not required, although programming excerpts in Fortran are presented at the end of some chapters. This work begins with an intuitive approach to interpolation over a triangular element and thus avoids making the simple complex by not doing energy minimization via a calculus of variations approach so often found in reference books on the finite element method. The presentation then proceeds to a principal of virtual work via the well-known divergence theorem to obtain element equilibrium and then global equilibrium, both expressed as stiffness equations relating force to displacement. Solution methods for the finite element approach including elimination and iteration methods are discussed. Hydro-mechanical coupling is described and extension of the finite element method to accommodate fluid flow in porous geological media is made. Example problems illustrate important concepts throughout the text. Additional problems for a 15-week course of study are presented in an appendix; solutions are given in another appendix.

Download or read book Fundamentals of Discrete Element Methods for Rock Engineering Theory and Applications written by Lanru Jing and published by Elsevier. This book was released on 2007-07-18 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some fundamental concepts behind the basic theories and tools of discrete element methods (DEM), its historical development, and its wide scope of applications in geology, geophysics and rock engineering. Unlike almost all books available on the general subject of DEM, this book includes coverage of both explicit and implicit DEM approaches, namely the Distinct Element Methods and Discontinuous Deformation Analysis (DDA) for both rigid and deformable blocks and particle systems, and also the Discrete Fracture Network (DFN) approach for fluid flow and solute transport simulations. The latter is actually also a discrete approach of importance for rock mechanics and rock engineering. In addition, brief introductions to some alternative approaches are also provided, such as percolation theory and Cosserat micromechanics equivalence to particle systems, which often appear hand-in-hand with the DEM in the literature. Fundamentals of the particle mechanics approach using DEM for granular media is also presented.· Presents the fundamental concepts of the discrete models for fractured rocks, including constitutive models of rock fractures and rock masses for stress, deformation and fluid flow· Provides a comprehensive presentation on discrete element methods, including distinct elements, discontinuous deformation analysis, discrete fracture networks, particle mechanics and Cosserat representation of granular media· Features constitutive models of rock fractures and fracture system characterization methods detaiing their significant impacts on the performance and uncertainty of the DEM models

Download or read book The Combined Finite Discrete Element Method written by Antonio A. Munjiza and published by John Wiley & Sons. This book was released on 2004-04-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined finite discrete element method is a relatively new computational tool aimed at problems involving static and / or dynamic behaviour of systems involving a large number of solid deformable bodies. Such problems include fragmentation using explosives (e.g rock blasting), impacts, demolition (collapsing buildings), blast loads, digging and loading processes, and powder technology. The combined finite-discrete element method - a natural extension of both discrete and finite element methods - allows researchers to model problems involving the deformability of either one solid body, a large number of bodies, or a solid body which fragments (e.g. in rock blasting applications a more or less intact rock mass is transformed into a pile of solid rock fragments of different sizes, which interact with each other). The topic is gaining in importance, and is at the forefront of some of the current efforts in computational modeling of the failure of solids. * Accompanying source codes plus input and output files available on the Internet * Important applications such as mining engineering, rock blasting and petroleum engineering * Includes practical examples of applications areas Essential reading for postgraduates, researchers and software engineers working in mechanical engineering.

Download or read book Discrete Element Methods written by Benjamin K. Cook and published by . This book was released on 2002 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Third International Conference on Discrete Element Methods, held in Santa Fe, New Mexico on September 23-25, 2002. This Geotechnical Special Publication contains 72 technical papers on discrete element methods (DEM), a suite of numerical techniques developed to model granular materials, rock, and other discontinua at the grain scale. Topics include: DEM formulation and implementation approaches, coupled methods, experimental validation, and techniques, including three-dimensional particle representations, efficient contact detection algorithms, particle packing schemes, and code design. Coupled methods include approaches to linking solid continuum and fluid models with DEM to simulate multiscale and multiphase phenomena. Applications include fundamental investigations of granular mechanics; micromechanical studies of powder, soil, and rock behavior; and large-scale modeling of geotechnical, material processing, mining, and petroleum engineering problems.

Download or read book Geomechanics from Micro to Macro written by Kenichi Soga and published by CRC Press. This book was released on 2014-08-26 with total page 1668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomechanics from Micro to Macro contains 268 papers presented at the International Symposium on Geomechanics from Micro and Macro (IS-Cambridge, UK, 1-3 September 2014). The symposium created a forum for the dissemination of new advances in the micro-macro relations of geomaterial behaviour and its modelling. The papers on experimental investigati

Download or read book Innovative Numerical Modelling in Geomechanics written by Luis Ribeiro e Sousa and published by CRC Press. This book was released on 2012-05-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1990s five books on ‘Applications of Computational Mechanics in Geotechnical Engineering’ have been published. Innovative Numerical Modelling in Geomechanics is the 6th and final book in this series, and contains papers written by leading experts on computational mechanics. The book treats highly relevant topics in the field of geotechnics, such as environmental geotechnics, open and underground excavations, foundations, embankments and rockfill dams, computational systems and oil geomechanics. Special attention is paid to risk in geotechnical engineering, and to recent developments in applying Bayesian networks and Data Mining techniques. Innovative Numerical Modelling in Geomechanics will be of interest to civil, mining and environmental engineers, as well as to engineering geologists. The book will also be useful for academics and researchers involved in geotechnics.

Download or read book Geotechnical Modelling written by David Muir Wood and published by CRC Press. This book was released on 2017-12-21 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling forms an implicit part of all engineering design but many engineers engage in modelling without consciously considering the nature, validity and consequences of the supporting assumptions. Derived from courses given to postgraduate and final year undergraduate MEng students, this book presents some of the models that form a part of the typical undergraduate geotechnical curriculum and describes some of the aspects of soil behaviour which contribute to the challenge of geotechnical modelling. Assuming a familiarity with basic soil mechanics and traditional methods of geotechnical design, this book is a valuable tool for students of geotechnical and structural and civil engineering as well as also being useful to practising engineers involved in the specification of numerical or physical geotechnical modelling.

Download or read book XAFS for Everyone written by Scott Calvin and published by CRC Press. This book was released on 2013-05-20 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: XAFS for Everyone provides a practical, thorough guide to x-ray absorption fine-structure (XAFS) spectroscopy for both novices and seasoned practitioners from a range of disciplines. The text is enhanced with more than 200 figures as well as cartoon characters who offer informative commentary on the different approaches used in XAFS spectroscopy. The book covers sample preparation, data reduction, tips and tricks for data collection, fingerprinting, linear combination analysis, principal component analysis, and modeling using theoretical standards. It describes both near-edge (XANES) and extended (EXAFS) applications in detail. Examples throughout the text are drawn from diverse areas, including materials science, environmental science, structural biology, catalysis, nanoscience, chemistry, art, and archaeology. In addition, five case studies from the literature demonstrate the use of XAFS principles and analysis in practice. The text includes derivations and sample calculations to foster a deeper comprehension of the results. Whether you are encountering this technique for the first time or looking to hone your craft, this innovative and engaging book gives you insight on implementing XAFS spectroscopy and interpreting XAFS experiments and results. It helps you understand real-world trade-offs and the reasons behind common rules of thumb.

Download or read book Deterministic Numerical Modeling of Soil Structure Interaction written by Stephane Grange and published by John Wiley & Sons. This book was released on 2021-12-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to describe soil–structure interaction in various situations (nonlinear, static, dynamic, hydro-mechanical couplings), this book gives an overview of the main modeling methods developed in geotechnical engineering. The chapters are centered around: the finite element method (FEM), the finite difference method (FDM), and the discrete element method (DEM). Deterministic Numerical Modeling of Soil–Structure Interaction allows the reader to explore the classical and well-known FEM and FDM, using interface and contact elements available for coupled hydro-mechanical problems. Furthermore, this book provides insight on the DEM, adapted for interaction laws at the grain level. Within a classical finite element framework, the concept of macro-element is introduced, which generalizes constitutive laws of SSI and is particularly straightforward in dynamic situations. Finally, this book presents the SSI, in the case of a group of structures, such as buildings in a town, using the notion of metamaterials and a geophysics approach.

Download or read book Computational Mechanics New Frontiers for the New Millennium written by Prof. Valliappan and published by Elsevier. This book was released on 2012-12-02 with total page 963 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings contain the papers presented at the 1stAsian Pacific Congress on Computational Mechanics held in Sydney, on 20-23 November 2001. The theme of the first Congress of the Asian-Pacific Association for Computational Mechanics in the new millennium is New Frontiers for the New Millennium. The papers cover such new frontiers as micromechanics, contact mechanics, environmental geomechanics, chemo-thermo-mechanics, inverse techniques, homogenization, meshless methods, smart materials/smart structures and graphic visualization, besides the general topics related to the application of finite element and boundary element methods in structural mechanics, fluid mechanics, geomechanics and biomechanics.

Download or read book Numerical Methods in Geomechanics Volume 1 written by G. Swoboda and published by Routledge. This book was released on 2017-11-01 with total page 1312 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2017. Routledge is an imprint of Taylor & Francis, an Informa company.

Download or read book Modern Trends in Geomechanics written by Wei Wu and published by Springer Science & Business Media. This book was released on 2006-11-22 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is loaded with rich and stimulating articles by a roster of brilliant scholars, reflecting some recent trends in the frontier research of geomechanics. This collection of 32 contributions stems from an international workshop on "Modern Trends of Geomechanics" held in Vienna. The contributions span a wide range of topics and an enormous range of physical scales, from micromechanics at grain scale to engineering problems at large scale; from laboratory and field testing over constitutive modelling to numerical analysis. The key features of this book are: thermodynamics, multiphase continua and transport phenomena; constitutive modelling, localized bifurcation, micropolar theory, unsaturated soil, viscous and cyclic behaviour; numerical and analytical methods; discrete element method, micromechanics, grain crushing and damage; laboratory and field testing, foundation and mining engineering. This book will be rewarding for anyone interested in the frontier research in geomechanics and geotechnical engineering, appealing to graduate students, researchers and engineers alike.

Download or read book Numerical Models in Geomechanics written by G.N. Pande and published by CRC Press. This book was released on 2004-08-15 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the current research and advances made in the application of numerical methods in geotechnical engineering, this volume details proceedings of the Ninth International Symposium on 'Numerical Models in Geomechanics - NUMOG IX' held in Ottawa, Canada, 25-27 August 2004. Highlighting a number of new developments in the area, papers concentrate upon the following four main areas: * constitutive relations for geomaterials * numerical algorithms: formulation and performance * modelling of transient, coupled and dynamic problems * application of numerical techniques to practical problems. Representing the most advanced, modern findings in the field, Numerical Models in Geomechanics is a comprehensive and impeccably-researched text, ideal for students and researchers as well as practising engineers.

Download or read book Soil Structure Interaction Underground Structures and Retaining Walls written by V.M. Ulitsky and published by IOS Press. This book was released on 2015-02-24 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: With construction techniques becoming ever more complex, and population pressure leading to the development of increasingly problematic sites, expertise in the area of soil structure interaction is crucial to architectural and construction industries worldwide. This book contains the proceedings of the ISSMGE Technical Committee 207 International Conference on Geotechnical Engineering - Soil Structure Interaction and Retaining Walls - held in St Petersburg, Russia, in June 2014. The conference was dedicated to the memory of the outstanding geotechnical expert Gregory Porphyryevich Tschebotarioff. Topics covered at the conference included: soil structure interaction, underground structures and retaining walls, site investigation as a source of input parameters for soil structure interaction, and interaction between structures and frozen soils. The papers included here are the English language papers. Papers presented by the authors in Russian are published by the Georeconstruction Institute of St. Petersburg.

Download or read book Rock Mechanics and Engineering Volume 3 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-04-21 with total page 1178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Modeling & Design is the third volume of the five-volume set Rock Mechanics and Engineering and contains twenty-eight chapters from key experts in the following fields: - Numerical Modeling Methods; - Back Analysis; - Risk Analysis; - Design and Stability Analysis: Overviews; - Design and Stability Analysis: Coupling Process Analysis; - Design and Stability Analysis: Blast Analysis and Design; - Rock Slope Stability Analysis and Design; - Analysis and Design of Tunnels, Caverns and Stopes. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.