Download or read book Dissolved Air Flotation For Water Clarification written by James K. Edzwald and published by McGraw Hill Professional. This book was released on 2011-10-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive work on Dissolved Air Flotation Systems (DAF) for clarification of drinking water Dissolved Air Flotation for Water Clarification is a complete design and application source for the water industry divided into three parts: The first develops a fundamental basis for understanding how the process works, and might be adapted to work better. The second provides a reference for design engineers, water operators, and water managers regarding applications where DAF might be incorporated in an overall treatment scheme. The third develops the necessary DAF design concepts and to illustrate them by description of practical applications. Using DAF to remove particles is not only an important process for conventional drinking water plants, but may also be used as a pre-treatment process in membrane plants including reverse osmosis for water desalinization, and in water reuse applications. Dissolved Air Flotation for Water Clarification offers: Information on new applications of DAF in advanced water treatment, desalinization, water reuse, and industrial treatment in food, waste, and pulp and paper Detailed examples, including the world’s largest new DAF plant ever built – Croton, NY water treatment plant A single volume entirely devoted to DAF for drinking water clarification Coverage of conventional and pre-treatment processes SI and conventional units throughout

Download or read book Innovations in Flotation Technology written by P. Mavros and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book is the outcome of an Advanced Study Institute meeting, which was held in Kallithea, Chalkidiki, in Northern Greece, from 12-25 May 1991 and attended by 69 delegates from 18 countries. The Institute brought together scientists, engineers and technologists currently involved in basic and applied research on the different aspects of flotation. The Institute covered subjects in four major areas of flotation: a) fundamentals; b) chemical technology aspects; c) mineral processing; and d) water and wastewater treatment. Apart from the papers reproduced in this volume, several short oral communications were also presented. Participants also had the opportunity to visit the Hellenic Chemical Products & Fertilizers Co. Ltd. mixed sulphides plant, in Chalkidiki. Conference participants, whose interest and research projects are in this broad field of science and engineering, provided a well-informed discussion of the problems encountered, as well as possible directions of future technological developments. It is hoped that this book is not only a good record of the presentations made (formal and informal), analyzing the state-of-the-art in flotation, but will also be helpful for students, scientists and technologists working in the fields of separation processes and in particular mineral processing and wastewater engineering. All the invited speakers and the participants made this summer school possible, worthwhile and enjoyable. The sponsorship by the NATO Scientific Affairs Division is gratefully ack nowledged. The Editors would like to thank the members of the Organizing Committee, Dr. B.A.

Download or read book Chemical Water and Wastewater Treatment III written by Rudolf Klute and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exactly ten years ago an experiment was started that proved to be extremely successful: the First Gothenburg Symposium. Its intent was to further the under standing of all processes pertaining to Chemical Water and Wastewater Treatment, and to bring together specialists working in basic research as well as in devel opment and administration. Now, the Proceedings of the Sixth Symposium are about to be published, clearly proving that there is a need for this forum. They dramatically illustrate the significance and the dynamic development of the topics of these symposia. It is fascinating to witness that in this time of reduced economic growth or even standstill, the environmental drive has not come to a halt, as many anticipated or feared. It is accepted more and more that the protection of the environment, a constant theme in all the Gothenburg Symposia, is not only a topic to be dealt with in times of affluence; it is now also seen as an instrument for cutting ex penditure, saving energy, and husbanding resources. The ever growing interest in these Gothenburg Symposia, documented by the large number of contributions the scientific panel received and the large demand for the books of this series that always exceeds the supply, testify to this commitment.

Download or read book Flotation Technology written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2010-06-09 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the emergence of a growing desire worldwide that positive actions be taken to restore and protect the environment from the degrading effects of all forms of pollution – air, water, soil, and noise. Since pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unreal- tic demand for zero waste. However, as long as waste continues to exist, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identi?ed: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? This book is one of the volumes of the Handbook of Environmental Engineering series. The principal intention of this series is to help readers formulate answers to the last two questions above. The traditional approach of applying tried-and-true solutions to speci?c pollution p- blems has been a major contributing factor to the success of environmental engineering and has accounted in large measure for the establishment of a “methodology of pollution control. ” However, the realization of the ever-increasing complexity and interrelated nature of current environmental problems renders it imperative that intelligent planning of pollution abatement systems be undertaken.

Download or read book Integrated Design and Operation of Water Treatment Facilities written by Susumu Kawamura and published by John Wiley & Sons. This book was released on 2000-09-14 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely up-to-date coverage of water treatment facility design and operation This Second Edition of Susumu Kawamura's landmark volume offerscomprehensive coverage of water treatment facility design, from thebasic principles to the latest innovations. It covers a broadspectrum of water treatment process designs in detail and offersclear guidelines on how to choose the unit, process, and equipmentthat will maximize overall efficiency and minimize maintenancecosts. This book also explores many important operational issuesthat affect today's plant operators and facility designers. This new edition introduces several new subjects, including valueengineering, watershed management, dissolved air flotation process,filtered reservoir (clearwell) design, and electrical systemdesign. It provides expanded and updated coverage of objectives forfinished water quality, instrumentation and control, disinfectionprocess, ozonation, disinfection by-product control, the GACprocess, and the membrane filtration process. Other importantfeatures of this Second Edition include: * Practical guidance on the design of every water treatment plantcomponent * New information on plant layout, cost estimation, sedimentationissues, and more * English and SI units throughout * Help in designing for compliance with water treatment-relatedgovernment regulations Supplemented with hundreds of illustrations, charts, and tables,Integrated Design and Operation of Water Treatment Facilities,Second Edition is an indispensable, hands-on resource for civilengineers and managers, whether working on new facilities orredesigning and rebuilding existing facilities.

Download or read book Dissolved Air Flotation in Water and Wastewater Treatment written by H. Kiuru and published by IWA Publishing (International Water Assoc). This book was released on 2001-04-30 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dissolved air flotation (DAF) is an increasingly applied technology for particle removal in water and wastewater treatment. In DAF tiny air bubbles attach to the particles, which float to the surface, forming flocs which can be periodically removed to a sludge channel. The technique originated in the early 1900s, but has steadily widened its application across municipal and industrial water and wastewater treatment, earning a reputation for reliability, controllability and effectiveness. The aim of the Helsinki conference was to provide an opportunity for researchers and practitioners to examine and discuss current developments and applications of DAF technology in water and wastewater treatment. From the 58 oral and poster presentations, 26 papers have been selected for these proceedings. The papers have been divided into four themes: drinking water treatment, wastewater treatment, industrial and trade applications, theory and modelling.

Download or read book Dissolved Air Flotation For Water Clarification written by James Edzwald and published by McGraw Hill Professional. This book was released on 2011-10-04 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive work on Dissolved Air Flotation Systems (DAF) for clarification of drinking water Dissolved Air Flotation for Water Clarification is a complete design and application source for the water industry divided into three parts: The first develops a fundamental basis for understanding how the process works, and might be adapted to work better. The second provides a reference for design engineers, water operators, and water managers regarding applications where DAF might be incorporated in an overall treatment scheme. The third develops the necessary DAF design concepts and to illustrate them by description of practical applications. Using DAF to remove particles is not only an important process for conventional drinking water plants, but may also be used as a pre-treatment process in membrane plants including reverse osmosis for water desalinization, and in water reuse applications. Dissolved Air Flotation for Water Clarification offers: Information on new applications of DAF in advanced water treatment, desalinization, water reuse, and industrial treatment in food, waste, and pulp and paper Detailed examples, including the world’s largest new DAF plant ever built – Croton, NY water treatment plant A single volume entirely devoted to DAF for drinking water clarification Coverage of conventional and pre-treatment processes SI and conventional units throughout

Download or read book Water Treatment Grade 2 written by Awwa and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resource added for the Environmental Engineering Waste and Water Technology program 105062.

Download or read book The Scientific Basis of Flotation written by K.J. Ives and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: K.J.Ives Professor of Public Health Engineering University College London Industrial application of the use of bubbles to float fine particles in water began before the beginning of this century, in the field of mineral processing. Such bubble flotation was applied very little outside mineral processing, until about 1960 when the dissolved air process, which has already had some success in the pulp and paper industry, was applied to water and wastewater treatment. The subsequent two decades saw not only a growth development for water and wastewater treatment, but also a growing cognisance of the similarities that existed with mineral processing flotation. Therefore the time seemed ripe in 1982 for a joint meeting between experts in these two major fields of flotation to put together the Scientific Basis of Flotation in the form of a NATO Advanced Study Institute. Attended by about 60 specialists, mainly post doctoral, from 17 countries, this Study Institute in residence for two weeks in Christ's College, Cambridge (UK) heard presentations from several international experts, principally the 8 co-authors of this book. The integration of the various scientific disciplines of physics, physical chemistry, colloid science, hydrodynamics and process engineering showed where the common basiS, and occasional important differences, of flotation could be applied to mineral processing, water and wastewater treatment, and indeed some other process industries (for example: pharmaceuticals, and food manufacture).

Download or read book An Applied Guide to Water and Effluent Treatment Plant Design written by Sean Moran and published by Butterworth-Heinemann. This book was released on 2018-06-01 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Applied Guide to Water and Effluent Treatment Plant Design is ideal for chemical, civil and environmental engineering students, graduates, and early career water engineers as well as more experienced practitioners who are transferring into the water sector. It brings together the design of process, wastewater, clean water, industrial effluent and sludge treatment plants, looking at the different treatment objectives within each sub-sector, selection and design of physical, chemical and biological treatment processes, and the professional hydraulic design methodologies. This book will show you how to carry out the key steps in the process design of all kinds of water and effluent treatment plants. It provides an essential refresher on the relevant underlying principles of engineering science, fluid mechanics, water chemistry and biology, together with a thorough description of the heuristics and rules of thumb commonly used by experienced practitioners. The water treatment plant designer will also find specific advice on plant layout, aesthetics, economic considerations and related issues such as odor control. The information contained in this book is usually provided on the job by mentors so it will remain a vital resource throughout your career. - Explains how to design water and effluent treatment plants that really work - Accessible introduction to, and overview of, the area that is written from a process engineering perspective - Covers new treatment technologies and the whole process, from treatment plant design, to commissioning

Download or read book Handbook of Microalgae Based Processes and Products written by Eduardo Jacob-Lopes and published by Academic Press. This book was released on 2020-07-23 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Microalgae-based Processes and Products provides a complete overview of all aspects involved in the production and utilization of microalgae resources at commercial scale. Divided into four parts (fundamentals, microalgae-based processes, microalgae-based products, and engineering approaches applied to microalgal processes and products), the book explores the microbiology and metabolic aspects of microalgae, microalgal production systems, wastewater treatment based in microalgae, CO2 capture using microalgae, microalgae harvesting techniques, and extraction and purification of biomolecules from microalgae. It covers the largest number of microalgal products of commercial relevance, including biogas, biodiesel, bioethanol, biohydrogen, single-cell protein, single-cell oil, biofertilizers, pigments, polyunsaturated fatty acids, bioactive proteins, peptides and amino acids, bioactive polysaccharides, sterols, bioplastics, UV-screening compounds, and volatile organic compounds. Moreover, it presents and discusses the available engineering tools applied to microalgae biotechnology, such as process integration, process intensification, and techno-economic analysis applied to microalgal processes and products, microalgal biorefineries, life cycle assessment, and exergy analysis of microalgae-based processes and products. The coverage of a broad range of potential microalgae processes and products in a single volume makes this handbook an indispensable reference for engineering researchers in academia and industry in the fields of bioenergy, sustainable development, and high-value compounds from biomass, as well as graduate students exploring those areas. Engineering professionals in bio-based industries will also find valuable information here when planning or implementing the use of microalgal technologies. - Covers theoretical background information and results of recent research. - Discusses all commercially relevant microalgae-based processes and products. - Explores the main emerging engineering tools applied to microalgae processes, including techno-economic analysis, process integration, process intensification, life cycle assessment, and exergy analyses.

Download or read book Physicochemical Treatment Processes written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2005-03-11 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the emergence of a growing desire worldwide to take positive actions to restore and protect the environment from the degrading effects of all forms of pollution: air, noise, solid waste, and water. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste exists, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identified: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? The principal intention of the Handbook of Environmental Engineering series is to help readers formulate answers to the last two questions. The traditional approach of applying tried-and-true solutions to specific pollution pr- lems has been a major contributing factor to the success of environmental engineering, and has accounted in large measure for the establishment of a “methodology of pollution c- trol. ” However, realization of the ever-increasing complexity and interrelated nature of current environmental problems makes it imperative that intelligent planning of pollution abatement systems be undertaken.

Download or read book Water Treatment Unit Processes written by David G Stevenson and published by World Scientific. This book was released on 1997-12-30 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided into three sections: the first reviews the main processes available for treating water for drinking (potable) purposes, the second goes into some detail about the design and operation of the non-filtration (clarification) processes, and the third deals exclusively with filtration and related applications. It is intended as a source of practical information rather than a theoretical research treatise and includes discussion of component parts of the process units with reasons for design features as well as operating principles.This book fills a gap between general reviews and research papers, and contains much information which is based on experience passed down within organisations and which tends not to be published.

Download or read book Wastewater Treatment written by Glenn M. Tillman and published by CRC Press. This book was released on 1996-08-01 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater Treatment is another indispensable work from the author of Water Treatment. Both books are helpful tools for crisis identification and, most importantly, resolution. Tillman writes in a concise, well organized format - perfect for fast reference. This operator's guide presents basic troubleshooting and problem solving information for typical problems that can occur during the operation of processes used at municipal and industrial wastewater treatment plants. Common problems and the recommended operator responses are listed in tabular form for individual unit processes. Entry level operators will benefit greatly from the problems Tillman addresses, while experienced operators will appreciate it as a handy reference. The information compiled in this volume has been collected from various equipment manfacturers' operation and maintenance manuals, U.S. Environmental Protection Agency (EPA) technology transfer documents, the authors personal experience as a plant Operations and Maintenance manual writer, and his experience as a plant manager and operator. He includes only the most common wastewater treatment unit processes. He gives an overview of the treatment objective of the unit process, and then provides each with a troubleshooting table divided into Indicators/Observations: Possible Cause; Check or Monitor; Possible Solutions columns. Wastewater Treatment reads like the best of training manuals. Tillman's know-how, combined with his clarity, make this book required occupational reading. The brief, straightforward format and easy-to-read tables make the guide an accessible problem solving reference.

Download or read book Coagulation and Flocculation in Water and Wastewater Treatment written by John Bratby and published by IWA Publishing. This book was released on 2006-10-15 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coagulation and Flocculation in Water and Wastewater Treatment provides a comprehensive account of coagulation and flocculation techniques and technologies in a single volume covering theoretical principles to practical applications. Thoroughly revised and updated since the 1st Edition it has been progressively modified and increased in scope to cater for the requirements of practitioners involved with water and wastewater treatment. A thorough gamut of treatment scenarios is attempted, including turbidity, color and organics removal, including the technical aspects of enhanced coagulation. The effects of temperature and ionic content are described as well as the removal of specific substances such as arsenic and phosphorus. Chemical phosphorus removal is dealt with in detail, Rapid mixing for efficient coagulant utilization, and flocculation are dealt with in specific chapters. Water treatment plant waste sludge disposal is dealt with in considerable detail, in an Appendix devoted to this subject. Invaluble for water scientists, engineers and students of this field, Coagulation and Flocculation in Water and Wastewater Treatment is a convenient reference handbook in the form of numerous examples and appended information.

Download or read book Practical Wastewater Treatment written by David L. Russell and published by John Wiley & Sons. This book was released on 2006-08-28 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical techniques for handling industrial waste and designing treatment facilities Practical Wastewater Treatment is designed as a teaching and training tool for chemical, civil, and environmental engineers. Based on an AIChE training course, developed and taught by the author, this manual equips readers with the skills and knowledge needed to design a wastewater treatment plant and handle various types of industrial wastes. With its emphasis on design issues and practical considerations, the manual enables readers to master treatment techniques for managing a wide range of industrial wastes, including oil, blood and protein, milk, plating, refinery, and phenolic and chemical plant wastes. A key topic presented in the manual is biological modeling for designing wastewater treatment plants. The author demonstrates how these models lead to both more efficient and more economical plants. As a practical training tool, this manual contains a number of features to assist readers in tackling complex, real-world problems, including: * Examples and worked problems throughout the manual demonstrate how various treatment plants and treatment techniques work * Figures and diagrams help readers visualize and understand complex design issues * References as well as links to online resources serve as a gateway to additional information * Practical design hints, stemming from the author's extensive experience, help readers save time and avoid unwanted and expensive pitfalls * Clear and logically organized presentation has been developed and refined based on an AIChE course taught by the author in the United States, Mexico, and Venezuela Whether a novice or experienced practitioner, any engineer who deals with the treatment of industrial waste will find a myriad of practical advice and useful techniques that they can immediately apply to solve problems in wastewater treatment.

Download or read book Guide to the Practical Use of Chemicals in Refineries and Pipelines written by Johannes Karl Fink and published by Gulf Professional Publishing. This book was released on 2016-05-09 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guide to Practical Use of Chemicals in Refineries and Pipelines delivers a well-rounded collection of content, references, and patents to show all the practical chemical choices available for refinery and pipeline usage, along with their purposes, benefits, and general characteristics. Covering the full spectrum of downstream operations, this reference solves the many problems that engineers and managers currently face, including corrosion, leakage in pipelines, and pretreatment of heavy oil feedstocks, something that is of growing interest with today's unconventional activity. Additional coverage on special refinery additives and justification on why they react the way they do with other chemicals and feedstocks is included, along with a reference list of acronyms and an index of chemicals that will give engineers and managers the opportunity to recognize new chemical solutions that can be used in the downstream industry. - Presents tactics practitioners can use to effectively locate and utilize the right chemical application specific to their refinery or pipeline operation - Includes information on how to safely perform operations with coverage on environmental issues and safety, including waste stream treatment and sulfur removal - Helps readers understand the composition and applications of chemicals used in oil and gas refineries and pipelines, along with where they should be applied, and how their structure interacts when mixed at the refinery