Download or read book Diffusion written by E. L. Cussler and published by Cambridge University Press. This book was released on 1997-02-28 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clear and complete description of diffusion in fluids, for undergraduate students in chemical engineering.

Download or read book Methods for Predicting Dispersion Coefficients in Natural Streams written by Hugo B. Fischer and published by . This book was released on 1968 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fiber Optics Standard Dictionary written by Martin Weik and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber Optics Vocabulary Development In 1979, the National Communications System published Technical InfonnationBulle tin TB 79-1, Vocabulary for Fiber Optics and Lightwave Communications, written by this author. Based on a draft prepared by this author, the National Communications System published Federal Standard FED-STD-1037, Glossary of Telecommunications Terms, in 1980 with no fiber optics tenns. In 1981, the first edition of this dictionary was published under the title Fiber Optics and Lightwave Communications Standard Dictionary. In 1982, the then National Bureau of Standards, now the National Institute of Standards and Technology, published NBS Handbook 140, Optical Waveguide Communications Glossary, which was also published by the General Services Admin istration as PB82-166257 under the same title. Also in 1982, Dynamic Systems, Inc. , Fiberoptic Sensor Technology Handbook, co-authored and edited by published the this author, with an extensive Fiberoptic Sensors Glossary. In 1989, the handbook was republished by Optical Technologies, Inc. It contained the same glossary. In 1984, the Institute of Electrical and Electronic Engineers published IEEE Standard 812-1984, Definitions of Terms Relating to Fiber Optics. In 1986, with the assistance of this author, the National Communications System published FED-STD-1037A, Glossary of Telecommunications Terms, with a few fiber optics tenns. In 1988, the Electronics Industries Association issued EIA-440A, Fiber Optic Terminology, based primarily on PB82-166257. The International Electrotechnical Commission then pub lished IEC 731, Optical Communications, Terms and Definitions. In 1989, the second edition of this dictionary was published.

Download or read book Practical Design Calculations for Groundwater and Soil Remediation written by Jeff Kuo and published by CRC Press. This book was released on 1998-09-17 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective and enduring site restoration involves professionals from many branches of science and engineering. Geologists, hydrologists, chemists, microbiologists and meteorologists all play a part in remediation efforts-as do civil, chemical, mechanical and environmental engineers. When the time comes for all-important design calculations, that's where conflicts between disciplines become apparent. Due to certain differences in educational training, the ability of environmental professionals to perform or review design calculations varies. Bridge the gap with Practical Design Calculations for Groundwater and Soil Remediation. Jeff Kuo's hands-on experience as a consultant and teacher of soil/groundwater remediation informs this collection of the most practical and relevant working information. Written in a user-friendly, "cookbook-style" format, readers can promptly access the necessary information. More than 200 equations, coupled with tables and figures, allow a clear understanding of purposes and procedures. To match the scope of Practical Design Calculations for Groundwater and Soil Remediation, you would have to comb through numerous publications. You may also be taking a chance on data that's already obsolete, due to rapid advancements in remediation technologies. One aspect doesn 't change: basic, straightforward design calculation. Practical Design Calculations for Groundwater and Soil Remediation helps everyone involved in a site restoration project follow the same set of guidelines-for effective results.

Download or read book Chemical and Biochemical Reactors and Process Control written by D G Peacock and published by Elsevier. This book was released on 1994-01-15 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: The publication of the third edition of "Chemical Engineering Volume" marks the completion of the re-orientation of the basic material contained in the first three volumes of the series. Volume 3 is devoted to reaction engineering (both chemical and biochemical), together with measurement and process control. This text is designed for students, graduate and postgraduate, of chemical engineering.

Download or read book Subsurface Transport and Fate Processes written by Robert C. Knox and published by CRC Press. This book was released on 2018-01-10 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the first comprehensive reference volume available on subsurface transport and fate processes. The volume is organized into four sections covering the basics of contaminant properties and how they affect transport and fate, the fundamental processes affecting subsurface transport and fate of contaminants, applications of transport and fate information to various contaminant types, and utilization of transport and fate information for predicting contaminant behavior. Specific topics such as traditional hydrodynamic processes of advection and dispersion, facilitated transport and contaminant flushing, and individual ground water contaminants are also explored in detail. Subsurface Transport and Fate Processes is ideal for environmental and ground water consultants, regulatory agency personnel, and educators in geology, hydrogeology, civil engineering, and environmental engineering.

Download or read book Fluidized Bed Combustion written by Simeon Oka and published by CRC Press. This book was released on 2003-09-16 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: A realization of recent clean energy initiatives, fluidized bed combustion (FBC) has quickly won industry preference due to its ability to burn materials as diverse as low-grade coals, biomass, and industrial and municipal waste. Fluidized Bed Combustion catalogs the fundamental physical and chemical processes required of bubbling fluidized beds before launching into application-centered coverage of hot-gas generator, incinerator, and boiler concepts and design, calculations for regime parameters and dimensions, and all aspects of FBC operation. It enumerates the environmental consequences of fluidized bed processes and proposes measures to reduce the formation of harmful emissions.

Download or read book Water Quality Modeling written by Steven C. McCutcheon and published by CRC Press. This book was released on 1990-01-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fascinating work is divided into two main sections. Part I reviews the basic principles of water movement in channels and the mass balance approach common to most models. It also covers the practical usefulness, model peer review, and guidance on model selection and calibration. Part II discusses flow simulation and prediction of time of travel, dye tracing and mixing, heat balance and temperature modeling, and reaeration and volatilization. This interesting, easy-to-read volume includes comprehensive reviews for the use of fluorescent water tracing dyes, longitudinal dispersion, evaporation and wind speed functions, prediction of saturation concentrations of dissolved oxygen, and reaeration coefficients. This book furnishes the reader with appendices which provide a synopsis of available computer models and gives a comprehensive listing of methods used to measure flow rates in rivers, tributaries, and pipes and channels introducing wastewaters into streams. This volume is a valuable, indispensable reference for all researchers, instructors, students in advanced environmental modeling courses, and practicing engineers.

Download or read book Water Quality Modeling for Wasteload Allocations and TMDLs written by Wu-Seng Lung and published by John Wiley & Sons. This book was released on 2001-04-30 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete, practical coverage of pollution control regulations and water quality modeling Water Quality Modeling for Wasteload Allocations and TMDLs provides practical guidance for engineers charged with determining the volume and character of wastewater that a body of water can receive without suffering environmental damage. Following the discussion on water pollution control regulations and their relationships to water quality modeling and wasteload allocation for determining the total maximum daily load (TMDL), the first half of the book focuses on quantifying the model coefficients to characterize physical, chemical, and biological processes of a variety of water quality problems. The remainder of the book guides engineers in the application of EPA-developed models for regulatory use. Presenting numerous case studies and a substantial amount of data, this comprehensive guide: * Covers practical applications of wasteload allocation * Provides guidance to develop technical information for obtaining National Pollution Discharge Elimination System (NPDES) permits * Demonstrates the application of STREAM, QUAL2E, WASP, and HAR03 Water Quality Modeling for Wasteload Allocations and TMDLs is an essential resource for state and federal water quality agencies, consulting engineering firms, publicly owned treatment works, environmental biologists and chemists, and public health officials involved with pollution control.

Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field

Download or read book Introduction to Environmental Forensics written by Brian L. Murphy and published by Academic Press. This book was released on 2014-07-30 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of Introduction to Environmental Forensics is a state-of-the-art reference for the practicing environmental forensics consultant, regulator, student, academic, and scientist, with topics including compound-specific isotope analysis (CSIA), advanced multivariate statistical techniques, surrogate approaches for contaminant source identification and age dating, dendroecology, hydrofracking, releases from underground storage tanks and piping, and contaminant-transport modeling for forensic applications. Recognized international forensic scientists were selected to author chapters in their specific areas of expertise and case studies are included to illustrate the application of these methods in actual environmental forensic investigations. This edition provides updates on advances in various techniques and introduces several new topics. - Provides a comprehensive review of all aspects of environmental forensics - Coverage ranges from emerging statistical methods to state-of-the-art analytical techniques, such as gas chromatography-combustion-isotope ratio mass spectrometry and polytopic vector analysis - Numerous examples and case studies are provided to illustrate the application of these forensic techniques in environmental investigations

Download or read book An Introduction to Multiphase Multicomponent Reservoir Simulation written by Matthew Balhoff and published by Elsevier. This book was released on 2022-10-26 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Petroleum Reservoir Simulation is aimed toward graduate students and professionals in the oil and gas industry working in reservoir simulation. It begins with a review of fluid and rock properties and derivation of basic reservoir engineering mass balance equations. Then equations and approaches for numerical reservoir simulation are introduced. The text starts with simple problems (1D, single phase flow in homogeneous reservoirs with constant rate wells) and subsequent chapters slowly add complexities (heterogeneities, nonlinearities, multi-dimensions, multiphase flow, and multicomponent flow). Partial differential equations and finite differences are then introduced but it will be shown that algebraic mass balances can also be written directly on discrete grid blocks that result in the same equations. Many completed examples and figures will be included to improve understanding. An Introduction to Petroleum Reservoir Simulation is designed for those with their first exposure to reservoir simulation, including graduate students in their first simulation course and working professionals who are using reservoir simulators and want to learn more about the basics. - Presents basic equations and discretization for multiphase, multicomponent transport in subsurface media in a simple, easy-to-understand manner - Features illustrations that explain basic concepts and show comparison to analytical solutions and commercial simulators - Includes dozens of completed example problems on a small number of grid blocks - Offers pseudocode and exercises to allow the reader to develop their own computer-based numerical simulator that can be verified against analytical solutions and commercial simulators

Download or read book Hydrodynamics and Mass Transfer in Downflow Slurry Bubble Columns written by Subrata Kumar Majumder and published by CRC Press. This book was released on 2019-01-02 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Slurry bubble column reactors are intensively used as a multiphase reactor in the chemical, biochemical, and petrochemical industries for carrying out reactions and mass transfer operations in which a gas, made up of one or several reactive components, comes into contact or reacts with a liquid. This volume describes the hydrodynamics of three-phase gas-liquid-solid flow in a downflow slurry bubble column. The efficiency of the downflow gas interacting system is characterized by the self-entrainment of secondary gas. The book covers the gas entrainment phenomena, gas holdup characteristics, pressure drop, gasliquid mixing characteristics, bubble size distribution, interfacial phenomena, and the mass transfer phenomena in the downflow slurry system. This volume will be useful in chemical and biochemical industries and in industrial research and development sectors, as well as in advanced education courses in this area. The book will be helpful for further understanding the multiphase behavior in gas interacting multiphase systems for research and development. The hydrodynamic and mass transfer characteristics discussed will be useful in the design and installation of the modified slurry bubble column in industry for specific applications.

Download or read book Water Quality Modelling for Rivers and Streams written by Marcello Benedini and published by Springer Science & Business Media. This book was released on 2013-02-11 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of the Water Framework Directive in the European countries is to achieve a “good status” of all the water bodies, in the integrated management of river basins. In order to assess the impact of improvement measures, water quality models are necessary. During the previous decades the progress in computer technology and computational methods has supported the development of advanced mathematical models for pollutant transport in rivers and streams. This book is intended to provide the fundamental knowledge needed for a deeper understanding of these models and the development of new ones, which will fulfil future quality requirements in water resources management. This book focuses on the fundamentals of computational techniques required in water quality modelling. Advection, dispersion and concentrated sources or sinks of contaminants lead to the formulation of the fundamental differential equation of pollutant transport. Its integration, according to appropriate initial and boundary conditions and with the knowledge of the velocity field, allows for pollutant behaviour to be assessed in the entire water body. An analytical integration is convenient only in one-dimensional approach with considerable simplification. Integration in the numerical field is useful for taking into account particular aspects of water body and pollutants. To ensure their reliability, the models require accurate calibration and validation, based on proper data, taken from direct measurements. In addition, sensitivity and uncertainty analysis are also of utmost importance. All the above items are discussed in detail in the 21 chapters of the book, which is written in a didactic form for professionals and students.

Download or read book Dynamic and Transient Infinite Elements written by Chongbin Zhao and published by Springer Science & Business Media. This book was released on 2009-06-23 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art theory and the application of dynamic and transient infinite elements for simulating the far fields of infinite domains involved in many of scientific and engineering problems.

Download or read book Fundamentals of Gas Reservoir Engineering written by J. Hagoort and published by Elsevier. This book was released on 1988-06-01 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas reservoir engineering is the branch of reservoir engineering that deals exclusively with reservoirs of non-associated gas. The prime purpose of reservoir engineering is the formulation of development and production plans that will result in maximum recovery for a given set of economic, environmental and technical constraints. This is not a one-time activity but needs continual updating throughout the production life of a reservoir.The objective of this book is to bring together the fundamentals of gas reservoir engineering in a coherent and systematic manner. It is intended both for students who are new to the subject and practitioners, who may use this book as a reference and refresher. Each chapter can be read independently of the others and includes several, completely worked exercises. These exercises are an integral part of the book; they not only illustrate the theory but also show how to apply the theory to practical problems.Chapters 2, 3 and 4 are concerned with the basic physical properties of reservoirs and natural gas fluids, insofar as of relevance to gas reservoir engineering. Chapter 5 deals with the volumetric estimation of hydrocarbon fluids in-place and the recoverable hydrocarbon reserves of gas reservoirs. Chapter 6 presents the material balance method, a classic method for the analysis of reservoir performance based on the Law of Conservation of Mass. Chapters 7-10 discuss various aspects of the flow of natural gas in the reservoir and the wellbore: single phase flow in porous and permeable media; gaswell testing methods based on single-phase flow principles; the mechanics of gas flow in the wellbore; the problem of water coning, the production of water along with the gas in gas reservoirs with underlaying bottom water. Chapter 11 discusses natural depletion, the common development option for dry and wet gas reservoirs. The development of gas-condensate reservoirs by gas injection is treated in Chapter 12.Appendix A lists the commonly used units in gas reservoir engineering, along with their conversion factors. Appendix B includes some special physical and mathematical constants that are of particular interest in gas reservoir engineering. Finally, Appendix C contains the physical properties of some common natural-gas components.

Download or read book Water Quality Engineering in Natural Systems written by David A. Chin and published by John Wiley & Sons. This book was released on 2006-05-19 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: FOCUSING ON CONTAMINANT FATE AND TRANSPORT, DESIGN OF ENVIRONMENTAL-CONTROL SYSTEMS, AND REGULATORY CONSTRAINTS This textbook details the fundamental equations that describe the fate and transport of contaminantsin the water environment. The application of these fundamental equations to the design of environmental-control systems and methodologies for assessing the impact of contaminant discharges into rivers, lakes, wetlands, ground water, and oceans are all covered. Readers learn to assess how much waste can be safely assimilatedinto a water body by developing a solid understanding of the relationship between the type of pollutant discharged, the characteristics of the receiving water, and physical, chemical, and biological impacts. In cases of surface runoff from urban and agricultural watersheds, quantitative relationships between the quality of surface runoff and the characteristics of contaminant sources located within the watersheds are presented. Some of the text's distinguishing features include its emphasis on the engineering design of systems that control the fate and transport of contaminants in the water environment, the design of remediation systems, and regulatory constraints. Particular attention is given to use-attainability analyses and the estimation of total maximum daily loads, both of which are essential components of water-quality control in natural systems. Readers are provided with a thorough explanation of the complex set of laws and regulations governing water-quality control in the United States. Proven as an effective textbook in several offerings of the author's class "Water Quality Control in Natural Systems," the flow of the text is carefully structured to facilitate learning. Moreover, a number of practical pedagogical tools are offered: * Practical examples used throughout the text illustrate the effects of controlling the quality, quantity, timing, and distribution of contaminant discharges into the environment * End-of-chapter problems, and an accompanying solutions manual, help readers assess their grasp of each topic as they progress through the text * Several appendices with useful reference material are provided, including current U.S. Water Quality Standards * Detailed bibliography guides readers to additional resources to explore particular topics in greater depth With its emphasis on contaminant fate and transport and design of environmental-control systems, this text is ideal for upper-level undergraduates and graduate students in environmental and civil engineering programs.Environmental scientists and practicing environmental/civil engineers will also find the text relevant and useful.