Download or read book An Introduction to Composite Materials written by D. Hull and published by Cambridge University Press. This book was released on 1996-08-13 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition has been greatly enlarged and updated to provide both scientists and engineers with a clear and comprehensive understanding of composite materials. In describing both theoretical and practical aspects of their production, properties and usage, the book crosses the borders of many disciplines. Topics covered include: fibres, matrices, laminates and interfaces; elastic deformation, stress and strain, strength, fatigue crack propagation and creep resistance; toughness and thermal properties; fatigue and deterioration under environmental conditions; fabrication and applications. Coverage has been increased to include polymeric, metallic and ceramic matrices and reinforcement in the form of long fibres, short fibres and particles. Designed primarily as a teaching text for final-year undergraduates in materials science and engineering, this book will also interest undergraduates and postgraduates in chemistry, physics, and mechanical engineering. In addition, it will be an excellent source book for academic and technological researchers on materials.
Download or read book Dislocations in Metals written by American Institute of Mining and Metallurgical Engineers. Institute of Metals Division and published by . This book was released on 1954 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocations and Plastic Deformation written by I. Kovács and published by Elsevier. This book was released on 2016-07-08 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dislocations and Plastic Deformation deals with dislocations and plastic deformation, and specifically discusses topics ranging from deformation of single crystals and dislocations in the lattice to the fundamentals of the continuum theory, the properties of point defects in crystals, multiplication of dislocations, and partial dislocations. The effect of lattice defects on the physical properties of metals is also considered. Comprised of nine chapters, this book begins by providing a short and, where possible, precise explanation of dislocation theory. The first six chapters discuss the properties of dislocations and point defects both in crystals and in an elastic continuum. The reader is then introduced to some applications of dislocation theory that show, for instance, the difficulties involved in understanding the hardening of alloys and the work-hardening of pure metals. This book concludes by analyzing the effect of heat treatment on the defect structure in metals. This text will be of interest to students and practitioners in the field of physics.
Download or read book Introduction to Dislocations written by Derek Hull and published by Butterworth-Heinemann. This book was released on 2001-07-02 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Dislocations was first published in 1965 in a series aimed at undergraduate and postgraduate students in metallurgy and materials science and related disciplines. At the time, the subject was maturing and it was expected that 'dislocation concepts' would remain a core discipline for a very long time. As expected, the book has been, and remains, an important undergraduate text all over the world. A wider range of materials has emerged since 1965, most notably in the field of electronics and micro-engineering. The principles of dislocation theory still apply but some of the detail requires further treatment. This fourth edition provides an essential basis for an understanding of many of the physical and mechanical properties of crystalline solids. This new edition has been extensively revised and updated to reflect developments in the understanding of the subject, whilst retaining the clarity and comprehensibility of the previous editions.
Download or read book Fundamental Aspects of Dislocation Interactions written by G. Kostorz and published by Elsevier. This book was released on 2013-09-03 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Aspects of Dislocation Interactions: Low-Energy Dislocation Structures III covers the papers presented at a European Research Conference on Plasticity of Materials-Fundamental Aspects of Dislocation Interactions: Low-Energy Dislocation Structures III, held on August 30-September 4, 1992 in Ascona, Switzerland. The book focuses on the processes, technologies, reactions, transformations, and approaches involved in dislocation interactions. The selection first offers information on work softening and Hall-Petch hardening in extruded mechanically alloyed alloys and dynamic origin of dislocation structures in deformed solids. Discussions focus on stress-strain behavior in relation to composition, structure, and annealing; comparison of stress-strain curves with work softening theory; sweeping and trapping mechanism; and model of dipolar wall structure formation. The text then ponders on plastic instabilities and their relation to fracture and dislocation and kink dynamics in f.c.c. metals studied by mechanical spectroscopy. The book takes a look at misfit dislocation generation mechanisms in heterostructures and evolution of dislocation structure on the interfaces associated with diffusionless phase transitions. Discussions focus on dislocation representation of a wall of elastic domains; equation of equilibrium of an elastic domain; transformation of dislocations; and theoretical and experimental background. The selection is a valuable reference for readers interested in dislocation interactions.
Download or read book Dislocation Dynamics and Plasticity written by Taira Suzuki and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 1950s the direct observation of dislocations became possible, stimulat ing the interest of many research workers in the dynamics of dislocations. This led to major contributions to the understanding of the plasticity of various crys talline materials. During this time the study of metals and alloys of fcc and hcp structures developed remarkably. In particular, the discovery of the so-called in ertial effect caused by the electron and phonon frictional forces greatly influenced the quantitative understanding of the strength of these metallic materials. Statis tical studies of dislocations moving through random arrays of point obstacles played an important role in the above advances. These topics are described in Chaps. 2-4. Metals and alloys with bcc structure have large Peierls forces compared to those with fcc structure. The reasons for the delay in studying substances with bcc structure were mostly difficulties connected with the purification techniques and with microscopic studies of the dislocation core. In the 1970s, these difficulties were largely overcome by developments in experimental techniques and computer physics. Studies of dislocations in ionic and covalent bonding materials with large Peierls forces provided infonnation about the core structures of dislocations and their electronic interactions with charged particles. These are the main subjects in Chaps. 5-7.
Download or read book Introduction to Dislocations written by Derek Hull and published by . This book was released on 1965 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocations and Properties of Real Materials written by Metals Society. Metal Science Committee and published by Ashgate Publishing. This book was released on 1985 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocations in Solids written by Hiroshi Suzuki and published by CRC Press. This book was released on 2023-03-08 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the Proceedings of the Yamada Conference IX on Dislocations in Solids, held in August 1984 in Tokyo. The purpose of the conference was two-fold: firstly to evaluate the increasing data on basic properties of dislocations and their interaction with other types of defects in solids and, secondly, to increase understanding of the material properties brought about by dislocation-related phenomena. Metals and alloys, semi-conductors and ions crystals were discussed. One of the important points of contention was the electronic state at the core of dislocation. Another was the dislocation model of amorphous structure.
Download or read book Worked Examples in Dislocations written by M. J. Whelan and published by CRC Press. This book was released on 1990 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocations written by J. Friedel and published by Elsevier. This book was released on 2013-10-22 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dislocations deals with the main properties of dislocations, including motion, climb, and vacancies. Topics covered include the elastic theory of dislocations, imperfect dislocations, and crystal growth, along with dislocation networks, annealing, and grain boundaries. The interaction of dislocations with other defects is also discussed. This book is comprised of 17 chapters and begins with an overview of the general properties of dislocations, with emphasis on perfect and real crystals and the general case for translation dislocations. The reader is then introduced to the motion of dislocations, including glide; vacancies and interstitial atoms; dislocation climb; imperfect dislocations and surfaces of misfit; and crystal growth, including growth from a liquid phase. The next section is devoted to the more or less complex networks of dislocations that can be formed in crystals, and to the plastic properties corresponding to these arrays. The remaining chapters explore the interactions of dislocations with other crystalline defects, primarily impurity atoms. This monograph is intended for physicists, metallurgists, materials scientists, research and engineering students, and research engineers.
Download or read book The Strengthening of Metals written by Donald Peckner and published by . This book was released on 1964 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocation Dynamics During Plastic Deformation written by Ulrich Messerschmidt and published by Springer Science & Business Media. This book was released on 2010-04-19 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Along with numerous illustrative examples, this text provides an overview of the dynamic behavior of dislocations and its relation to plastic deformation. It introduces the general properties of dislocations and treats the dislocation dynamics in some detail.
Download or read book Fundamental Aspects of Dislocation Theory written by John Arthur Simmons and published by . This book was released on 1970 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Role of Dislocations in the Strengthening and Failure of Metals written by Vera Semenovna Ivanova and published by . This book was released on 1967 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocation Dynamics written by Alan R. Rosenfield and published by . This book was released on 1968 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.
